Elite Screens PowerMax Series Bedienungsanleitung

Rev.123011-AS

www.elitescreens.com [email protected] 1

Electric Motorized Projection Screen

PowerMax Series

User’s Guide

Rev.123011-AS

www.elitescreens.com [email protected] 2

Make sure to read this user’s guide and follow the procedure below.

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black

Top Drop in the roller. Please be aware o this as it will void your warranty with Elite Screens. Unapproved

changes or modi ications (except or cutting the power cord or hardwire installations) to this unit are

prohibited and will void your warranty. For more in ormation, please contact our Technical Support

Department at (877) 511-1211 Ext. 604.

•Please retain this user’s guide for future reference.

•To avoid damaging the unit, do not use with any unauthorized accessories not

recommended by the manufacturer.

•Handle the unit carefully during transportation to avoid any damages.

•To ensure safe and reliable operation, direct connection to a properly grounded power

source is advised.

•The power outlet supplying power to the unit should be close to the unit and easily

accessible.

•Do not install the unit on uneven or inclined surfaces.

•Do not put heavy objects on the power cord and position it properly to avoid creating a

trip obstacle.

•ever overload the power cord to prevent an electric shock or fire due to a loose contact

or a short circuit.

•There are not user serviceable parts in this unit. Do not attempt to disassemble this unit

by yourself. o one except authorized technicians can open and make repairs to this unit.

•Make sure the power source this unit is connected to has a continuous power flow.

•If there is need to use an extension cord, make sure the cord has an equal rating as the

appliance to avoid overheat.

•Do not handle the power plug when your hands are wet or your feet are in contact with

water.

Do not use this unit under the following circumstances.

•Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.

•Avoid direct Sunshine, rain shower and moisture.

•Keep away from fire sources and high temperature to prevent this device from

overheating.

•Cut off the power supply first before transportation or maintenance.

•Fully disconnect from the power supply when the unit is not in use for a long period of

time, as should be done with any other electric household appliance.

•To avoid possible injury and/or an electric shock, do not attempt to use the screen if there

is obvious damage or if there are any evident broken parts.

Important Safety & Warning Precautions

Rev.123011-AS

www.elitescreens.com [email protected] 3

Due to various installation environments, the instructions provided in this user’s guide are for

reference only. Please consult a professional installation company for further installation and

safety advice. The installer must insure that proper mounting hardware is used to provide

adequate strength suitable for the installation. lite Screens is not liable for any faulty

installations.

The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top black drop

in the roller. Please be aware of this as it will void the limitation of your warranty.

Individual modifications to this product are prohibited and will void the warranty with the

manufacturer. Please contact Elite Screens Customer Service for any questions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

owever, there is no guarantee that the interference will not occur on a particular installation. If this

equipment causes harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures.

Reorient or relocate the receiving antenna of the device which may be casing the interference.

Increase the separation between the screen and the device’s receiver.

onnect the equipment into a different power outlet other than the device.

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign

particles such as dust, sawdust, and/or liquids.

Regardless of the mounting method, the screen should be securely supported so that the vibration or

pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure

that the fasteners used are of adequate strength and suitable for the installation location.

Installation Warning

Pre

Installation

NOTE

Rev.123011-AS

www.elitescreens.com

Hardware Parts List for the Powe

Please make sure all parts listed below are included before proceeding with the installation

Hardware Parts List

Mounting Bracket

b. M4x50 Screw

c. M10 Anchor

Suspended eiling Bracket onnector

e. M5x15 Screw

& Bolt

f. Bubble Level

[email protected]

Hardware Parts List for the Powe

rMax Series

Please make sure all parts listed below are included before proceeding with the installation

e. f

QTY

Suspended eiling Bracket onnector

rMax Series

Please make sure all parts listed below are included before proceeding with the installation

Rev.123011-AS

www.elitescreens.com [email protected] 5

Please consult a professional Installer. Elite Screens is not liable for faulty installations.

Flush Mount to the Wall

1. Mark the location of where the screen is to be installed, drill your holes, and insert the

M10 Anchors (c).

2. Install the Mounting Brackets (a) to the wall and secure with the M4x50 Screws (b).

Mou

Mounting Bracke Mounting Bracket

ix Plate 1

Anchor M4x50 Screw

Mounting Bracket

ix Plate 2

Wall Mounting

Bracket

Installation Instructions

Rev.123011-AS

www.elitescreens.com [email protected] 6

3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first fix plate,

and securing the back of the case to the second Fix Plate. Make sure the case slots are securely

attached to the Mounting Bracket.

Mounting Bracket

ix Plate 1 ix Plate 2

Mounting Bracket

Case Slot 1

Case Slot 2

Screen Case

Rev.123011-AS

www.elitescreens.com [email protected] 7

Flush Mount to the Ceiling

1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10

Anchors (c).

2. Install the Mounting Brackets (a) to the ceiling and secure with the M4x50 Screws (b).

Ceiling

M10 Anchor

3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first Fix Plate,

and securing the back of the case to the second Fix Plate. Make sure the case slots are securely

attached to the anging Bracket.

M4x50 Screw

Mounting Bracket

ix Plate 1

Mounting Bracket

ix Plate 2

ix Plate

Rev.123011-AS

www.elitescreens.com

Suspended Ceiling using Chains

You can also hang the screen on a ceiling by using chains (not included

onnect the Suspended eiling Bracket onnector (d) to the

the M5x15 Screws & Bolts

(e).

M5x15 Bolt

(e)

Mounting Bracket

(a)

3. Insert chains (n

ot included) through the loop holes of the Suspended eiling Bracket onnector (d).

Sus

pended Ceiling Bracket Connector

Loop Holes

[email protected]

Suspended Ceiling using Chains

(additional hardware required)

You can also hang the screen on a ceiling by using chains (not included

onnect the Suspended eiling Bracket onnector (d) to the

Mounting Bracket

(a) and secure with

(e).

M5x15 Bolt

Suspended eiling Bracket

(d)

M5x15 Screw

(e)

ot included) through the loop holes of the Suspended eiling Bracket onnector (d).

pended Ceiling Bracket Connector

(a) and secure with

Suspended eiling Bracket

onnector

ot included) through the loop holes of the Suspended eiling Bracket onnector (d).

Rev.123011-AS

www.elitescreens.com

Built in 3 Way Control Switch

1. The PowerMax Series c

omes with a 3 Way ontrol Switch attached to the Power ord, which is 3.5

meters in length.

2. Use the provided

Bubble Level (f) to ensure the screen is level before plugging in the power cord.

3 Way Control

Up/Stop/Down

Switch

Remove Screen

from Mounting Brackets

1. Pull down on the Mounting

Bracket Release Tab and remove the bottom of the case first, away

from the wall/ceiling

, followed by the top of the case.

Release Tab

[email protected]

Built in 3 Way Control Switch

omes with a 3 Way ontrol Switch attached to the Power ord, which is 3.5

Bubble Level (f) to ensure the screen is level before plugging in the power cord.

Bubble Level f)

from Mounting Brackets

Bracket Release Tab and remove the bottom of the case first, away

, followed by the top of the case.

Pull Bottom of case first away from wall/ceiling.

omes with a 3 Way ontrol Switch attached to the Power ord, which is 3.5

Bubble Level (f) to ensure the screen is level before plugging in the power cord.

Bracket Release Tab and remove the bottom of the case first, away

Pull Bottom of case first away from wall/ceiling.

Rev.123011-AS

www.elitescreens.com

ZPM-

RT Optional Remote

Please contact Elite Screens to purchase the

IR Remote

RF Remote 3 Way Wall Switch

Red+ Green -

12V Trigger

IR Eye Receiver

[email protected]

RT Optional Remote

Control Kit for PowerMax Series

Please contact Elite Screens to purchase the

optional ZPM-RT

Remote ontrol Kit.

4 55”

B. .

RF Remote 3 Way Wall Switch

AAA Battery x 2

110”

F. G.

IR Eye Receiver

Wall Box

Control Kit for PowerMax Series

Remote ontrol Kit.

AAA Battery x 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Elite Screens Projektionsfläche Handbücher

Elite Screens

Elite Screens Elite Home 2 Series Bedienungsanleitung

Elite Screens

Elite Screens VMAX PLUS 4 SERIES Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Tab-Tension Series Bedienungsanleitung

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Bedienungsanleitung

Elite Screens

Elite Screens QuickStand Series Bedienungsanleitung

Elite Screens

Elite Screens Lunette Series Bedienungsanleitung

Elite Screens

Elite Screens FE72V Bedienungsanleitung

Elite Screens

Elite Screens VMAX PLUS 4 SERIES Bedienungsanleitung

Elite Screens

Elite Screens ezFrame CineGrey 5D Bedienungsanleitung

Elite Screens

Elite Screens TE100HW2 Bedienungsanleitung

Elite Screens

Elite Screens AR100H Bedienungsanleitung

Elite Screens

Elite Screens QuickStand Series Kurzanleitung

Elite Screens

Elite Screens Spectrum 2 Series Kurzanleitung

Elite Screens

Elite Screens Starling Tension Series Bedienungsanleitung

Elite Screens

Elite Screens Insta-DE Screen Bedienungsanleitung

Elite Screens

Elite Screens TE100HC2 Betriebsanleitung

Elite Screens

Elite Screens Manual SRM Pro Series Bedienungsanleitung

Elite Screens

Elite Screens QuickStand Series Bedienungsanleitung

Elite Screens

Elite Screens VMAX2 (Plus) Series Bedienungsanleitung

Elite Screens

Elite Screens TE100HC2 Bedienungsanleitung

Elite Screens

Elite Screens isf CineWhite UHD-B Sable Frame B2 Series Bedienungsanleitung

Elite Screens

Elite Screens Electric84H Bedienungsanleitung

Elite Screens

Elite Screens Spectrum Tab-Tension Series Bedienungsanleitung

Elite Screens

Elite Screens EDGE FREE Aeon Series Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung

Draper

Draper Envoy Handbuch

SI Dynamic 2 XL Bedienungsanleitung

Draper

Draper Nocturne+ E Montageanleitung