Elkron MEDEA Betriebsanleitung

PROGRAMMING MANUAL

MULTI-FUNCTION INTRUSION

SYSTEM

On the website www.elkron.com, you may find updated information

relating to the documentation provided with the product

DS80MP1R-002 LBT81011

Directive 2012/19/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste

electrical and electronic equipment (WEEE).

The symbol of the crossed-out wheeled bin on the product or on its packaging indicates that this

product must not be disposed of with your other household waste.

Instead, it is your responsibility to dispose of your waste equipment by handing it over to a

designated collection point for the recycling of waste electrical and electronic equipment.

The separate collection and recycling of your waste equipment at the time of disposal will help to

conserve natural resources and ensure that it is recycled in a manner that protects human health

and the environment.

For more information about where you can drop off your waste equipment for recycling, please

contact your local city office, your household waste disposal service or the shop where you

purchased the product.

The information contained in this manual was gathered and checked with care but the manufacturer cannot be held liable

for errors or omissions.

The manufacturer reserves the right to implement improvements or changes to the products described in this manual

without prior notice.

This manual may contain references or information on products (hardware or software) or services which are not yet on

the market. These references and information do not imply that the manufacturer will market such products or services in

the future.

Elkron is a trademark of URMET S.p.A.

All trademarks mentioned in this document are the property of their respective owners.

the MEDEA system.

Tel. +39 011.3986711 –Fax +39 011.3986703

www.elkron.com –mail to: [email protected]

 
 
MEDEA Programming Manual 

 
Table of contents 
Table of Contents 
Table of contents..........................................................................................................................................................................1 
Figure index ..................................................................................................................................................................................4 
Table index....................................................................................................................................................................................6 
Introduction...................................................................................................................................................................................7 
How the manual is organised......................................................................................................................................................7 
Conventions used .......................................................................................................................................................................7 
Glossary......................................................................................................................................................................................8 
Standards and certifications......................................................................................................................................................10 
The EN 50131-1 standard 10 
IMQ mark 11 
MEDEA certifications.................................................................................................................................................................11 
1- How to program the MEDEA system..............................................................................................................................12 
1 Programming via computer........................................................................................................................................12 
1.1 Web server 12 
1.2 Connecting to the control panel via USB 12 
1.3 Connecting to the control panel via LAN (and/or Ethernet cable) 12 
1.4 Connecting to the control panel via WLAN (WiFi) 13 
2- Access codes and authorisations..................................................................................................................................14 
1 Access codes.............................................................................................................................................................14 
1.1 Default access codes 15 
3- Programming via PC, tablet or smartphone ..................................................................................................................16 
1 Accessing the control panel.......................................................................................................................................16 
2 Working session ........................................................................................................................................................17 
2.1 Session time 18 
2.2 Entry the session with the time programmer enabled 18 
3 Home page................................................................................................................................................................19 
3.1 Information panels 20 
3.2 Menu 21 
3.3 Application management and data export/import buttons 21 
4 Programming procedure............................................................................................................................................21 
4.1 Programming a new control panel 21 
4.2 Importing an existing configuration 22 
4.3 Changing the configuration 22 
4.4 Configuring parameters 22 
4.5 Copying the configuration 22 
4- CONFIGURATION.............................................................................................................................................................23 
1 Control panel .............................................................................................................................................................23 
1.1 Global Parameters 23 
1.2 Date and Time 24 
1.3 Control Unit Upgrade from cloud 24 
1.4 Control Unit Update from File 25 
1.5 Advanced Setting 26 
2 Optional modules.......................................................................................................................................................26 
2.1 Phone General Parameters 26 
2.2 Mobile Network Module 30 
2.3 PSTN Module 32 
2.4 ZigBee Module 34 
2.5 Module WiFi 34 
3 Automated Test .........................................................................................................................................................35 
3.1 Power Supplies 35 
3.2 Cyclic Notification 35 
3.3 Radio Supervision 36 
4 Connectivity...............................................................................................................................................................36 
4.1 LAN Port Parameter 36 
4.2 WiFi Parameter 37 
4.3 Cloud 38 
5 Bus Peripherals .........................................................................................................................................................38 
5.1 Search Peripherals 39 

 

MEDEA Programming Manual 
 
 
5.2 BUS Expansion 39 
5.3 Radio Expansions 40 
5.4 Keypads 41 
5.5 Readers 41 
5.6 Supplementary Power Supply 41 
6 Radio Peripherals......................................................................................................................................................42 
6.1 Input 42 
6.2 Sirens 43 
6.3 Remote Commands 43 
6.4 Keypads 43 
7 ZigBee Peripherals....................................................................................................................................................44 
7.1 Detectors with Camera 44 
7.2 Detectors with Video Camera 45 
7.3 Repeaters 45 
7.4 Status Leds 46 
7.5 Relay modules 46 
7.6 Shutter modules 46 
7.7 Scenario control 47 
7.8 Termoregolazione 47 
8 Prio (In/Out) - RF - ZB ...............................................................................................................................................48 
8.1 Balance customizations 50 
5- PROGRAMMING...............................................................................................................................................................52 
1 Sectors ......................................................................................................................................................................52 
2 Times.........................................................................................................................................................................54 
3 Inputs.........................................................................................................................................................................55 
4 Outputs......................................................................................................................................................................59 
5 Output groups............................................................................................................................................................61 
6 Association of outputs to control panel statuses........................................................................................................63 
7 Association of outputs to sector statuses...................................................................................................................64 
8 Scenarios...................................................................................................................................................................65 
9 User Codes................................................................................................................................................................67 
10 User keys...................................................................................................................................................................69 
11 Contacts ....................................................................................................................................................................71 
11.1 Contacts 71 
11.2 SIAIP Advance Parameters 74 
11.3 Sending Message in Contact-ID Format 74 
11.4 Base Messages 75 
12 Audio generation........................................................................................................................................................76 
13 Event alerts................................................................................................................................................................77 
14 Time scheduler..........................................................................................................................................................79 
14.1 Scheduler configuration procedure 79 
15 Expansion modules ...................................................................................................................................................83 
16 Keypads.....................................................................................................................................................................83 
17 Readers.....................................................................................................................................................................86 
18 Power supply units.....................................................................................................................................................88 
19 Wireless inputs ..........................................................................................................................................................89 
20 Radio siren.................................................................................................................................................................89 
21 Remote controls.........................................................................................................................................................90 
22 Wireless Keypads......................................................................................................................................................92 
23 Zigbee repeaters........................................................................................................................................................93 
24 Zigbee flashers..........................................................................................................................................................94 
25 Zigbee Home Automation Modules............................................................................................................................95 
26 Zigbee scenario command ........................................................................................................................................96 
27 ZigBee Photo Detectors.............................................................................................................................................97 
28 ZigBee Video Detectors.............................................................................................................................................98 
29 Cameras....................................................................................................................................................................99 
6- DIAGNOSTICS................................................................................................................................................................101 
1.1 Central Unit 101 
1.2 Bus Peripherals 103 
1.3 Supplementary Power Supplies 103 
1.4 Bus Peripherals 103 
1.5 Radio Peripherals 104 
1.6 Zigbee Peripherals 105 
1.7 Menu Input/Output 105 
1.8 Output 106 
1.9 Event History 107 
1.10 Testing procedure 108 
7- UTILITY ...........................................................................................................................................................................108 

 
 
MEDEA Programming Manual 

 
1 UTILITY Menu .........................................................................................................................................................108 
8- Keypad menu .................................................................................................................................................................108 
1 Accessing the Tecnico menu...................................................................................................................................108 
2 Navigating the menus..............................................................................................................................................109 
3 Data entry and selection..........................................................................................................................................109 
3.1 Entering characters with the keypad 109 
4 Menu structure.........................................................................................................................................................109 
5 Main menu...............................................................................................................................................................110 
6 System Status menu................................................................................................................................................111 
7 Open Input/Tamper menu........................................................................................................................................111 
8 Alarms Memory menu..............................................................................................................................................112 
9 Tamper Memory menu ............................................................................................................................................113 
10 Fault Memory menu.................................................................................................................................................114 
11 Storico Eventi menu.................................................................................................................................................115 
12 Settings menu..........................................................................................................................................................116 
13 Enable menu............................................................................................................................................................117 
14 Test menu................................................................................................................................................................118 
15 Connectivity menu...................................................................................................................................................119 
16 Output control menu................................................................................................................................................120 
17 Manutenzione menu................................................................................................................................................121 
18 System Info menu....................................................................................................................................................121 
19 Isolation menu .........................................................................................................................................................122 
20 Time-Date menu......................................................................................................................................................122 
21 Display menu...........................................................................................................................................................123 
22 USERS menu ..........................................................................................................................................................123 
23 KEYS Menu.............................................................................................................................................................124 
24 Contats menu ..........................................................................................................................................................125 
25 Program.Hourly menu..............................................................................................................................................126 
26 Enable USER menu.................................................................................................................................................128 
27 Enable KEY menu ...................................................................................................................................................128 
28 Abilita Radiocomando menu....................................................................................................................................129 
29 State Connettivity Menu...........................................................................................................................................129 
30 Connettivity LAN Port menu.....................................................................................................................................130 
31 WiFi Connettivity menu............................................................................................................................................131 
32 Connettivity Mobile Data menu................................................................................................................................132 
33 Maintenece Sys. Log menu .....................................................................................................................................132 
9- Updating firmware and software of MEDEA control panel and devices over the bus.............................................133 
1 Update file name......................................................................................................................................................133 
 
 
 
 
 
 
 
 
 
 
 
 

 
4 
MEDEA Programming Manual 
 
 
Figure index 
Figure 1 - Login.............................................................................................................................................................................16 
Figure 2 - Example of edited parameter indication (Tooltip) .........................................................................................................17 
Figure 3 - Control panel reboot with new configuration.................................................................................................................17 
Figure 4 - Session expired............................................................................................................................................................18 
Figure 5 - Home page...................................................................................................................................................................19 
Figure 6 - Control panel parameters.............................................................................................................................................23 
Figure 7 - Date and time entry......................................................................................................................................................24 
Figure 8 - Software update from cloud..........................................................................................................................................24 
Figure 9- Software update confirmation........................................................................................................................................25 
Figure 10 - Firmware and software update...................................................................................................................................25 
Figure 11 - General telephone parameters...................................................................................................................................26 
Figure 12 - Mobile network module...............................................................................................................................................30 
Figure 13 - PSTN Module.............................................................................................................................................................32 
Figure 14 - ZigBee module ...........................................................................................................................................................34 
Figure 15 - WiFi module................................................................................................................................................................34 
Figure 16 - Power supplies...........................................................................................................................................................35 
Figure 17 - Cyclical alert...............................................................................................................................................................35 
Figure 18 - Wireless supervision...................................................................................................................................................36 
Figure 19 - Ethernet parameters...................................................................................................................................................36 
Figure 20 - WiFi parameters.........................................................................................................................................................37 
Figure 21 - Elkron Cloud parameters............................................................................................................................................38 
Figure 22 - Device search.............................................................................................................................................................38 
Figure 23 - Expansions.................................................................................................................................................................39 
Figure 24 - Wireless receivers......................................................................................................................................................40 
Figure 25 - Keypads .....................................................................................................................................................................41 
Figure 26 - Capacitive keypads ....................................................................................................................................................41 
Figure 27 - Readers......................................................................................................................................................................41 
Figure 28 - Power supply units .....................................................................................................................................................41 
Figure 29 - Wireless inputs...........................................................................................................................................................42 
Figure 30 - Wireless sirens...........................................................................................................................................................43 
Figure 31 - Remote controls .........................................................................................................................................................43 
Figure 32 - Wireless keypads .......................................................................................................................................................43 
Figure 33 - Acquisition and removal of ZigBee devices................................................................................................................44 
Figure 34 - ZigBee photo sensor ..................................................................................................................................................44 
Figure 35 - ZigBee video sensor...................................................................................................................................................45 
Figure 36 - ZigBee repeaters........................................................................................................................................................45 
Figure 37 - ZigBee flashers...........................................................................................................................................................46 
Figure 38 - ZigBee relay modules.................................................................................................................................................46 
Figure 39 - ZigBee shutter modules..............................................................................................................................................46 
Figure 40 –ZigBee scenario controls...........................................................................................................................................47 
Figure 41–Heat adjustment..........................................................................................................................................................47 
Figure 42 - In/Out points (PrIO) ....................................................................................................................................................48 
Figure 43- Balancing customisations............................................................................................................................................50 
Figure 44- Balancing customisations............................................................................................................................................50 
Figure 45 - Sectors.......................................................................................................................................................................52 
Figure 46 - Sector times................................................................................................................................................................54 
Figure 47 - Inputs..........................................................................................................................................................................55 
Figure 48 - Input customisation.....................................................................................................................................................58 
Figure 49 - Outputs.......................................................................................................................................................................59 
Figure 50 - Output customisation..................................................................................................................................................60 
Figure 51 - Output groups.............................................................................................................................................................61 
Figure 52 - Output group customisation........................................................................................................................................62 
Figure 53 - Association of outputs to control panel statuses.........................................................................................................63 
Figure 54 - Association of outputs to control panel statuses.........................................................................................................63 
Figure 55 - Association of outputs to sector statuses ...................................................................................................................64 
Figure 56 - Association of outputs to sector statuses ...................................................................................................................64 
Figure 57 - Scenarios ...................................................................................................................................................................65 
Figure 58 - Scenario customisation ..............................................................................................................................................66 
Figure 59 - User interface.............................................................................................................................................................67 
Figure 60 - User code customisation ............................................................................................................................................68 
Figure 61 - User keys ...................................................................................................................................................................69 
Figure 62 - User key customisation ..............................................................................................................................................70 
Figure 63 - Telephone numbers....................................................................................................................................................71 
Figure 64 - Telephone number customisation...............................................................................................................................72 
Figure 65 - Telephone number customisation for SIAIP ...............................................................................................................73 
Figure 66 - SIAIP parameters.......................................................................................................................................................74 

 
 
MEDEA Programming Manual 
5 
 
Figure 67–Contact-ID parameters ...............................................................................................................................................74 
Figure 68 - Common messages for voice and text communications.............................................................................................75 
Figure 69 - Audio file generation...................................................................................................................................................76 
Figure 70 - Audio file generation...................................................................................................................................................76 
Figure 71 - Alerts..........................................................................................................................................................................77 
Figure 72 - Pairing alerts to phone numbers.................................................................................................................................78 
Figure 73 - Enabling the time scheduler .......................................................................................................................................79 
Figure 74 - List of daily schedules ................................................................................................................................................79 
Figure 75 - Daily schedule description and enabling method........................................................................................................79 
Figure 76 - Daily schedule actions................................................................................................................................................80 
Figure 77 - Daily schedule action customisation...........................................................................................................................80 
Figure 78 - Weekly schedule ........................................................................................................................................................81 
Figure 79 - Holiday scheduling .....................................................................................................................................................82 
Figure 80 - Expansions.................................................................................................................................................................83 
Figure 81 - Keypads .....................................................................................................................................................................83 
Figure 82 - Keypad customisation ................................................................................................................................................84 
Figure 83 - Readers......................................................................................................................................................................86 
Figure 84 - Reader customisation.................................................................................................................................................87 
Figure 85 - LED arrangement in the readers ................................................................................................................................88 
Figure 86 - Power supply units .....................................................................................................................................................88 
Figure 87 - Wireless inputs...........................................................................................................................................................89 
Figure 88 - Wireless siren.............................................................................................................................................................89 
Figure 89 - Remote controls .........................................................................................................................................................90 
Figure 90 - Remote control customisation ....................................................................................................................................91 
Figure 91 - Remote control customisation ....................................................................................................................................91 
Figure 92 - Wireless keypads .......................................................................................................................................................92 
Figure 93 - Wireless keypad customisation ..................................................................................................................................92 
Figure 94 - ZigBee repeaters........................................................................................................................................................93 
Figure 95 - ZigBee flashers...........................................................................................................................................................94 
Figure 96 - Zigbee home automation modules (relays and shutters)............................................................................................95 
Figure 97 –ZigBee scenario controls...........................................................................................................................................96 
Figure 98 –ZigBee scenario controls...........................................................................................................................................96 
Figure 99 - ZigBee photo sensor ..................................................................................................................................................97 
Figure 100 - ZigBee photo sensor ................................................................................................................................................97 
Figure 101 - ZigBee video sensor.................................................................................................................................................98 
Figure 102 - ZigBee video sensor.................................................................................................................................................98 
Figure 103 - Cameras...................................................................................................................................................................99 
Figure 104 - Cameras...................................................................................................................................................................99 
Figure 105 - Control panel status................................................................................................................................................101 
Figure 106 –Connectivity...........................................................................................................................................................101 
Figure 107 –Test battery............................................................................................................................................................102 
Figure 108 –Connectivity...........................................................................................................................................................102 
Figure 109 –Optional modules...................................................................................................................................................102 
Figure 110 –Operator search.....................................................................................................................................................102 
Figure 111 - Contact simulation..................................................................................................................................................102 
Figure 112 - Power supply units .................................................................................................................................................103 
Figure 113 - Bus devices............................................................................................................................................................103 
Figure 114 –Wireless devices....................................................................................................................................................104 
Figure 115 - Zigbee devices .......................................................................................................................................................105 
Figure 116 - Inputs......................................................................................................................................................................105 
Figure 117 - Manual activation of the outputs.............................................................................................................................106 
Figure 118 - Events ....................................................................................................................................................................107 
Figure 119: Event Filters.............................................................................................................................................................107 
 
 
 
 
 
 
 
 

MEDEA Programming Manual

Table index

Table 1 - EN 50131-1 safety grades.............................................................................................................................................10

Table 2 - Environmental Classes EN50313-1...............................................................................................................................11

Table 3- Access Level EN50313-1 ...............................................................................................................................................11

Table 4 - Access codes ................................................................................................................................................................15

Table 5 - Default user access codes.............................................................................................................................................15

Table 6 - Home page information panels......................................................................................................................................20

Table 7 - Cloud connection...........................................................................................................................................................20

Table 8 - Telephone alarm sending mode ....................................................................................................................................28

Table 9 - Call cycle examples.......................................................................................................................................................29

Table 10 - Bus device identification signals..................................................................................................................................39

Table 11 - States recognised by different balancing types ...........................................................................................................49

Table 12 - Arming behaviour of sectors........................................................................................................................................53

Table 13 - Possible actions of the daily schedule.........................................................................................................................81

Table 14 - Menu navigation buttons............................................................................................................................................109

Table 15 - Buttons and associated charactersi...........................................................................................................................109

Table 16 - FW and SW update file names..................................................................................................................................133

MEDEA Programming Manual

Introduction

How the manual is organised

The manual is divided into chapters and the various topics are arranged in sequence to provide step-by-

step instructions for configuring and programming the system.

The installation and maintenance of the system is described in the Installation Manual.

The instructions for using the system by the end user are described in the User Manual.

Chapter 1

How to program the MEDEA system.

Chapter 2

User codes and permission levels.

Chapter 3

Programming via Web Server.

Chapter 4

Programming using the keypad.

Conventions used

The following conventions are used in the manual for the sake of simplicity:

This symbol indicates an important warning.

This symbol indicates advice.

This symbol indicates the compatibility with EN 50131 grade 3 certification.

The overall certification of the system is equal to the minimum certification of the devices

installed and the functions enabled.

This symbol indicates the compatibility with EN 50131 grade 2 certification.

The overall certification of the system is equal to the minimum certification of the devices

installed and the functions enabled.

This symbol indicates that the compatibility with the EN 50131 certification may depend on

other functions enabled in the system.

The symbol means that the function or device is not EN 50131 certified.

This symbol means that the function or device will cancel EN 50131 certification.

This function is also available on the keypad.

This function is not available on the keypad.

MEDEA Programming Manual

Glossary

AND

Logical function that requires all events to occur for an action to take place.

Open

An input is open when it receives a signal from a detector that is no longer in stand-

by, for example, because of an attempted intrusion has been detected.

APN

Acronym for Access Point Name, i.e. the access point for networks allowing data

transfer, such as GPRS or UMTS networks.

ATS

Acronym of Alarm Transmission System. Depending on the performance they can

offer, they are classified from ATS 1 to ATS 6, where ATS 1 is the simplest system

and ATS 6 is the system with the highest level of performance.

Communicator

A device capable of sending and transferring alarm signals and events via a telephone

line.

Default

The initial value of a device before configuration or when it is restored to the values

set by the manufacturer.

DTMF

Dual Tone Multi Frequency indicates the "tone" mode of composition of a telephone.

Entry

A point of access to rooms protected by the intrusion alarm system.

Event

A fact that occurs accidentally or when a specific condition is met, for example when

a certain period of time has passed.

Physical

address

Method by which the control unit recognises the device, which cannot be changed and

is assigned by the control unit. It addresses the inputs and outputs.

Logical address

Addresses freely assignable by the installer to help him identify detectors, outputs and

installed devices. Used by the control unit to display inputs and outputs and identify

the alarms sent.

Input

A point (terminal block) for the physical connection of a detector (usually a sensor or

a contact). The input is defined as being open when the sensor signals that it is no

longer in stand-by, for example because an attempted intrusion has occurred.

An input can be connected to multiple sensors, which are perceived as a single

physical entity. The latter configuration does not comply with EN 50131.

Open Collector transistor. Electrical output.

A logical function that requires that at least one of the terms of operation be true for

the result to be true.

Path

A set of one or more inputs that temporarily inhibit the signalling of sensor alarms

connected to enable the entry into or exit of a protected partition. The temporary

disabling time is called as entry or exit time. If neither the entry time nor the exit time

are being counted down, the activation of the detector generates an intrusion alarm

immediately.

Input/Output

PrIO

Connection point (terminal) that can be configured as input or output.

When configured as an input it can be used to physically connect a detector (usually

a sensor or a contact). Several detectors can also be connected to one input (up to

two in tandem configuration) and they are seen as physically separate items. The input

is defined as being open when the sensor signals that it is no longer in stand-by, for

example because it has verified an attempted intrusion.

When configured as an output, it can be used to connect of devices and actuators with

which the intrusion alarm system can operate in the outside world. For example, it can

signal an alarm (with a siren), communicate a system status (with a warning light or

buzzer) or activate electrical equipment.

Andere Handbücher für MEDEA

Inhaltsverzeichnis

Andere Elkron Mikrocontroller Handbücher

Elkron

Elkron PRO MEDEA/64 Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung