Elo TouchSystems Temperature Sensor Pro Bedienungsanleitung
USER MANUAL
Elo
Temperature Sensor Pro
UM600503 Rev B, page 2 of 18User Manual
– Temperature Sensor Pro
Copyright © 2020 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in anyform or
by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties
with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reservesthe right to
Revise this publication and to make changesfrom time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments
Elo, the Elo Logo, Elo Access and Elo Edge Connect are either trademarks or registered trademarks of Elo Touch Solutions, Inc.
All other trademarks are the property of their respective owners. © 2020 Elo Touch Solutions, Inc. All rights reserved.
UM600503 Rev B, page 3 of 18User Manual
– Temperature Sensor Pro
Table of Contents
Section 1: Introduction ............................................................................................................................................................................................................................... 4
Section 2: Installation ................................................................................................................................................................................................................................. 5
Section 4: Technical Support ....................................................................................................................................................................................................................
Section 3: Technical Specification ............................................................................................................................................................................................................. 9
Section 5: Safety ......................................................................................................................................................................................................................................
10
Section 6: Regulatory Information............................................................................................................................................................................................................
11
12
Section 7: Warranty Information............................................................................................................................................................................................................... 15
Section 8: Attention Information ............................................................................................................................................................................... 16
UM600503 Rev B, page 4 of 18User Manual
– Temperature Sensor Pro
Section 1: Introduction
Product Description
Utilizing an infrared bolometer (thermometer) and 2D camera, the Elo AccessTM Temperature Sensor Pro offers heatmap temperature
reading. With no alignment needed, the temperature sensor can detect faces, automatically adjust based on height and output temperature
data for each person detected in the field of view (FOV).
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your unit and prevent risks
to user safety. See Section 5 for more information on safety.
This manual contains information that is important for the proper setup of the Temperature Sensor Pro. Before setting up and powering on
your new Temperature Sensor Pro, read through this manual, especially the Installation, configuration, and operation chapters.
UM600503 Rev B, page 5 of 18User Manual
– Temperature Sensor Pro
Section 2: Installation
Unpacking the Temperature Sensor Pro
Verify that the box contains:
•
Temperature Sensor Pro
•
Quick Install Guide
•
2 mounting screws
•
2 screw covers
•
1 cable
UM600503 Rev B, page 6 of 18User Manual
– Temperature Sensor Pro
Installing the Temperature Sensor Pro
1. Some systems have more than one
mounting option. Select the top
location to mount the Temperature
Sensor Pro.
2. Remove the selected peripheral
cover from the display head to
expose the peripheral bay.
3. Gently press the Temperature Sensor
Pro into the peripheral bay making
sure the connector is mated.
4. Install the 2 flat head screws included
with the Temperature Sensor Pro.
5. Remove the protective film from the
included mylar covers and place the
covers over the screws.
Connect the micro-USB cable to another
Edge Connect port to provide additional
power for the Temperature Sensor Pro.
6.
Follow steps 1 through 6 to connect the Temperature Sensor Pro to the Edge Connect port on the display.
Once complete, connect the power splitter to the display.
UM600503 Rev B, page 7 of 18User Manual
– Temperature Sensor Pro
•
Visit www.elotouch.com/products for technical specification for the driver to download and install.
Installing the Touch Technology Software Drivers
For use with Windows Systems:
- Temperature Sensor Pro Driver
Open Device Manager.
Then double click “Magnity Thermal Camera”
1.
Press “Browse my computer for drivers”3. Press “Let me pick from a list of available drivers
on my computer”
4.
Press “Update Driver”2.
UM600503 Rev B, page 8 of 18
•
Use the Temperature Sensor Pro in the default mode of the system.
•
Run the application.
For use with Android systems
User Manual
– Temperature Sensor Pro
:
Press “Next”
5. Press “Have Disk”. Then in the pop-up dialog,
select “Thermal_Camera.inf”
6.
1
2
Press “Next”
7. After dialog shows “Windows has successfully
updated your drivers”, press “Close”
8.
UM600503 Rev B, page 9 of 18User Manual
– Temperature Sensor Pro
Temperature
Measurement Distance
Section 3: Technical Specification
Temperature measurement range: 30ºC – 45ºC
Temperature accuracy: +/- 0.5ºC @ ambient temperature 20 - 30ºC; 1ºC @ ambient temperature > 30ºC
Smart mode:
Measure distance to customer: 24 inches
Measure height of customer: 5 feet to 6.5 feet
The Temperature Sensor Pro is able to auto adjust camera angle to detect object and read temperature data.
Expert mode:
Measure distance to customer: 12 inches - 40 inches
Measure height of customer: 5 feet to 6.5 feet
The Temperature Sensor Pro is able to detect object and read temperature data in this range.
Smart mode and expert mode are suggestions to software application. Customer is the development owner of software application.
UM600503 Rev B, page 10 of 18User Manual
– Temperature Sensor Pro
Section 4: Technical Support
Technical Assistance
See this user manual’s last page for worldwide technical support phone numbers.
Contact us to get Windows and Android SDK for developers to use.
Technical Specifications
visit www.elotouch.com/products
for technical specifications for this device
Support
visit www.elotouch.com/support
for online self-help and technical support
Inhaltsverzeichnis
Beliebte Temperaturregler Handbücher anderer Marken
Swegon
Swegon LUNAd MB Bedienungsanleitung
Lucky Reptile
Lucky Reptile Thermo Control II Bedienungsanleitung
SENSORMETRIX
SENSORMETRIX Argon 100 Bedienungsanleitung
Fuji Electric
Fuji Electric PXE4 Bedienungsanleitung
Yuyao gongyi
Yuyao gongyi XMT-808 series Bedienungsanleitung
Selec
Selec TC544C Bedienungsanleitung
