Elo TouchSystems ET1002L Bedienungsanleitung

USER MANUAL

Elo Touch Solutions ET1002L,

ET1502L and ET2002L

Touchmonitors

UM600012 Rev D

Chapter 2: Installation

Unpacking the Touchmonitor

Open the carton and verify that the following items are present:

•Touchmonitor with Stand (Stand is not included with 1002L monitor)

•User Manuals CD

•Japanese language regulatory information pamphlet

•Quick Install Guide

•Mini-VGA to VGA cable

•HDMI cable

•USB cable

•Audio cable

•Power adaptor with North America, Europe, China and United Kingdom clipped-in plugs

•2 x Cable clamps

User Manual: 1002L, 1502L, 2002L

UM600012 Rev D, Page 5 of 24

Stand Positions (1502L)

The stand of the touchmonitor can be converted between two positions: the low profile

“hostess” position and the high profile “upright” position. The touchmonitor ships in the

low profile “hostess” position. (1002L monitor does not ship with a stand)

Low profile (“hostess”) position

To convert the stand into the high profile “upright” position, secure the thumbscrews into

the high or “H” screw-holes in the bottom of the base.

Upright position

To convert the stand into the low profile “hostess” position, secure the thumbscrews into the

low or “L” screw-holes in the bottom of the base.

User Manual: 1002L, 1502L, 2002L

UM600012 Rev D, Page 6 of 24

Connector Panel & Interfaces

Touchmonitor Connections

1.Connect the HDMI or Mini-VGA video cables between the m

2.\onitor’s HDMI/Mini-VGA input connectors and your HDMI/VGA video source, respectively.

Tighten the video cable’s screws for best performance.

2. Connect the USB touch cable between the monitor’s USB connector and your PC’s

USB port.

3. Connect the audio cable between the monitor’s Audio In jack and your audio source.

4. Select the correct power clip for your region and clip to the power adapter. Connect the

power adaptor’s input connector to the power source. Connect the power adaptor’s DC output

connector to the monitor’s input power jack.

5. The touchmonitor ships in an OFF state. Press the power button to turn it on.

User Manual: 1002L, 1502L, 2002L

UM600012 Rev D, Page 7 of 24

Installing the Touch Technology Software Drivers

No additional drivers are required for your projected-capacitive touchmonitor with Windows 7

and 8 operating systems, it uses Windows HID drivers. If the monitor is used with Windows

XP operating system, follow below steps to install Windows XP touch driver.

To download latest touch drivers

1.Visit www.elotouch.com/Support/Downloads/Driver/DriverDownload/Default.aspx

2.Select the operating system from “Operating System” dropdown menu.

3.Select the technology from “Technologies” dropdown menu.

4.Click on the driver version required for your touchmonitor.

5.Click “Accept” once you are directed to the “Driver License Agreement” page.

6.Enter you email address, Click on “Next Step”. Your driver download will start automatically.

7.If you are a new user, fill in the required information and Click on “Register”. Your

driver download will start automatically.

User Manual: 1002L, 1502L, 2002L

UM600012 Rev D, Page 8 of 24

Chapter 3: Mounting

Rear VESA Mount

For the 1002L touchmonitor, a four-hole 75x75mm and 100x100mm mounting pattern

available.The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C and VESA MIS-

B, 100, C.

For the 1502L and 2002L touchmonitors, a four-hole 75x75mm and 100x100mm mounting

pattern for M4 screws is provided on the rear of the monitor. Remove the stand using a

Phillips screwdriver to access this mounting interface. The VESA FDMI-compliant counting is

coded: VESA MIS-B, 75, C and VESA MIS-B, 100, C.

User Manual: 1002L, 1502L, 2002L

UM600012 Rev D, Page 9 of 24

Base Mount

For the 1502L touchmonitor, a threaded three-hole mounting pattern for M4 screws is

provided on the bottom of stand base for mounting or securing.

For the 2002L touchmonitor, threaded through-holes are provided on the bottom of the

stand base for mounting or securing.

User Manual: 1002L, 1502L, 2002L

UM600012 Rev D, Page 10 of 24

Andere Handbücher für ET1002L

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Elo TouchSystems Touch-Screen Handbücher

Elo TouchSystems

Elo TouchSystems 0702L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1900L Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems 1919L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1517L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1520 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems I-Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems Entuitive 1947L Series Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems Entuitive 192XL-XXWA-1 Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET1724L-7SWR-1-NL, ET1724L-8SW Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 2200L Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems TouchSystems 0700L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1938L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1929LM Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET1509L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems IDS 63 Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET3201L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1729L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems B-series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1939L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1515L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems X-Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 3239L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 2799L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET1002L Bedienungsanleitung

Beliebte Touch-Screen Handbücher anderer Marken

Elecro Engineering

Elecro Engineering Poolsmart Plus Montageanleitung

Johnson Controls

Johnson Controls IQ4 HUB Bedienungsanleitung

Duratec

Duratec S15 Bedienungsanleitung

Crestron

Crestron TPMC-3SM Bedienungsanleitung

Racelogic

Racelogic MFD Touch Bedienungsanleitung

J2 580 Benutzerhandbuch

HAI

HAI OmniTouch 10p Bedienungsanleitung

panel

panel PC PSR108-FM Series Bedienungsanleitung

Tipro

Tipro FREE+ Bedienungsanleitung

Systemline

Systemline Commander Bedienungsanleitung

Interactive Technologies

Interactive Technologies Insite Bedienungsanleitung

GVision

GVision Legacy Bedienungsanleitung

BeiJer

BeiJer T21C-C24 Bedienungsanleitung

Advantech

Advantech ITM-5117 Series Bedienungsanleitung

Edge

Edge CS Bedienungsanleitung

Vimar

Vimar 01420.B Bedienungsanleitung

iSMA

iSMA iSMA-D-PD10C-B1 Bedienungsanleitung

UTC Fire and Security

UTC Fire and Security Interlogix UX-TOUCH01 Montageanleitung