8.0 HOST CONTROL
TZVA 05/10 may be controlled in all its functions by host computer sending an
exadecimal character.
Transmission is RS 232, 8 bits,
1 stop bit, no parity.
Baud rate is 2 00.
Character must be sent to pin #12 of
connector B25 p.f. REMOTE.
GN is pin #25.
In the table below are shown the codes sent by host and the relative function
on the TZVA 05/10.
AUTOSEQUENCING and MUTE
are removed repeating the
command or sending the code of
another command.
AUTOSEQUENCING and MUTE
are removed pressing a
pushbutton on front panel.
In this case will be routed the
input relative to the pushbutton
pressed.
It contains:
TZVA 05/10 5x1 AND 10x1 VIDEO & AUDIO SWITCHER
10
ELPRO BROA CAST s.r.l.
Strada della Pronda 17 - TORINO (ITALY)
Tel. 011/707.19.55 - FAX 011/70.62.10
Pin # 12
sub - D FUNCTION
