ELRO AS90VS Bedienungsanleitung

AS90VS Manual EN Version 2

MANUAL

VIBRATIION SENSOR

ACCESSORY HOME+ALARM SYSTEM

Home is not a place, it’s a feeling

AS90VS

- 1 -

Content

1. Introduction ................................................................................................- 2 -

2. Pairing with the app....................................................................................- 2 -

3. Where on the window? ..............................................................................- 2 -

4. Battery replacement ...................................................................................- 3 -

5. Technical data.............................................................................................- 3 -

6. DoC..............................................................................................................- 3 -

7. Explanation of symbols ...............................................................................- 3 -

- 2 -

1. Introduction

A vibration sensor has to be stuck on a window pane. The sensor has two shock tubes that can detect

vibrations. If the vibration exceeds the safety threshold, an alarm is triggered.

The vibration sensor stuck in the corner of a small window will be less likely to trigger an alarm than if the

sensor is stuck in the middle of a large window. A vibration sensor can also be used to secure a display

case, for example.

2. Pairing with the app

The lithium battery must be activated, remove the plastic strip (1). Open the app on your smartphone, tap

"Add accessories" and select the "Scan QR code" option. Scan the QR code on the product and give it a

(location) name. Finally, tap the blue "V" to set the transmitter.

3. Where on the window?

A sensor is usually placed in the corner of a window. If a window is smashed, the sensor will always send a

notification to the base unit because of the vibration.

Tip:

After activating the battery, do not stick

(2) the sensor on the window yet. Place

the sensor on the window and cause a

vibration resulting in an alarm. You can

now stick the vibration sensor to the

window.

- 3 -

4. Battery replacement

Carefully open the housing (3) with a suitable screwdriver. Slide the empty battery out of the holder (4)

and replace a new 3V CR2032 battery with the "+" facing upwards.

5. Technical data

Operating voltage

DC 3V

Battery

1 x CR2032 button cell (3V)

Working current

≤40mA

Standby current

≤2mA

Frequency

433.92MHz

Range

150m without obstacle

Humidity

Humidity ≤90%rh (non-condensing)

Working temperature

-10°C ~ 50°C

Weight

35,5g 35.5g (without battery) 40g (with battery)

Dimension

80mm x 38.2mm x 13.3mm

6. DoC

- I, ELRO Europe, hereby declare that the radio equipment type AS90VS complies with Directive 2014/53/EU.

The full text of the EU declaration of conformity can be found at the following internet address:

www.elro.eu/compliance

- Frequency: 433.9MHz

- Maximum transmitting power: 0.433dBm

ELRO Europe | www.elro.eu

Postbus 9607 - Box E800

1006 GC Amsterdam - Netherlands

7. Explanation of symbols

Recycling and disposal: The WEEE symbol means that this product and batteries should be

disposed of separately from household waste. When this product has reached the end of its

service life, take it to a designated collection point near you for safe disposal or recycling. Protect

the environment and human health, use natural resources responsibly!

Read the manual before use and keep it for future use and maintenance.

Warranty visit www.elro.eu

Inhaltsverzeichnis

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung