EluneVision Fast Fold Bedienungsanleitung

Fast Fold Screen User Manual

General Notes

1. Thank you for choosing our projection screen for your home or business. Please read the user manual carefully before

proceeding. Follow the provided instructions to complete installation quickly and safely and keep in a safe place for

future reference.

2. Only use attachments and accessories approved by the manufacturer.

3. To avoid damaging the screen, do not fold the screen or touch the screen directly with your hands, tools, or any other

abrasive/sharp object.

4. When not in use, disassemble the screen to protect the optical surface from dirt, dust, grime, or any other impurities.

Store the screen in the carrying case provided.

5. When cleaning, use a soft damp cloth with warm water or diluted liquid detergent to remove any marks on the casing

or on the screen surface. Never attempt to use any solutions containing corrosive chemicals or abrasive cleaners on the

screen surface.

6. Do not use in a wet environment.

7. Spare parts should be stored out of reach of small children in accordance with household safety.

8. We will not be responsible for damages done due to user error or false operation.

Safety Guide

1. When using the screen, place it on a flat, stable surface and ensure the joints are locked and the hand screws are

secure.

2. If the screen is being used outdoors, ensure there are no environmental hazards which could cause damage to screen

and others around it. This includes but is not limited to wind, precipitation, flying objects, and pets.

3. Although the frame is aluminum, the weight of the screen can do damage as well as the case. Take caution to carefully

assemble the screen and use in a place with no hazards.

4. The screen should only be operated by adults.

5. Do not climb on the screen of hang things from it. This can cause the screen to fall and cause damage or injury to

others.

Packing List

•Screen fabric

•Screen fabric case

•2 folding legs

•1 screen frame

•Aluminium storage box

•Hand screws

Assembly Notes

•Clear a space on the floor large enough for screen assembly.

•Ensure you know which side of the projection screen is the front and which is the

back. This can be distinguished by the card which is on the corner of the fabric

screen or in the bag

•See Figure 1 for front projection and Figure 2 for rear view projection.

Assembly Instructions

1. Take the frame out of the box and

place it on a flat surface. First check

that the snaps are on top and if so,

proceed to unfold the longer sections

first.

2. Unfold the frame until the latch on

the hinge “clicks” into place. Repeat the

procedure for the shorter sections.

3. Make sure all 4 corners of the frame

are at 90° and that the hinged support

bar is straight and not bent.

If your screen has a 200” or greater

diagonal, the frame will come in 2

parts. Attach the upper frame to the

lower frame and fasten 2 frames with

M8×16 screws.

4. Take the screen fabric out of the bag

and put it inside the frame next to the

corner. Unfold as shown in the

diagram.

5. Once the screen fabric is fully

unfolded, secure it to the frame with

the snaps. Secure the snaps starting

from the corners and working towards

the middles. Secure the shorter side

before the longer side.

6. Take the folding legs out of the box

and unfold as shown. Make sure the

hinges click into place.

If the diagonal of your screen is 200” or

greater, use the hand screws to secure

the support leg to the vertical leg in an

appropriate position. The support leg

can be adjusted to an appropriate

length. If the frame is attached to the

legs higher up than the support leg, the

support leg should also be attached

higher up.

7. Lay the frame on the floor and

position the legs over the sides of the

frame at the desired height. Use the

hand screws to loosely attach the

frame. Repeat with the other leg and

when in the desired position, proceed

tightening both sides firmly.

8. When the frame is in the vertical

position, fold the front facing feet of

the legs out. Assembly is completed

and the projection screen will be stable

on a flat surface.

9. After using the screen, disassemble

the screen and store it in the box

provided. To disassemble the screen,

implement the assembly procedure in

reverse order.

Inhaltsverzeichnis

Andere EluneVision Projektionsfläche Handbücher

EluneVision

EluneVision Pneumatic Air-Lift Bedienungsanleitung

EluneVision

EluneVision In Ceiling Motorized Bedienungsanleitung

EluneVision

EluneVision Luna Bedienungsanleitung

EluneVision

EluneVision EV-S-1.0 Bedienungsanleitung

EluneVision

EluneVision Reference Studio 4K Motorized Tab-Tensioned Bedienungsanleitung

EluneVision

EluneVision Titon Tab Tension Bedienungsanleitung

EluneVision

EluneVision Atlas Series Bedienungsanleitung

EluneVision

EluneVision Tripod Screen Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

Elite Screens

Elite Screens M85XWS1-SRM Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

Elite Screens

Elite Screens Starling 2 Series Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung