Elvid VSW-4H-USB Bedienungsanleitung
QUICKSTART
GUIDE
VSW-4H-USB
4-Input HDMI Switcher with USB Output
3
The Elvid VSW-4H-USB Broadcast Video Switcher is a
powerful yet compact unit that puts advanced switching
and professional video effects at your ngertips. Great for
livestreaming and broadcast applications, this switcher will
boost the production value of any multicamera presentation,
concert, panel discussion, or interview.
The VSW-4H-USB features four HDMI inputs that support up to full
HD 1080p video, and a USB input to upload your graphics, logos, and
artwork to the switcher’s media library. Two congurable mic/stereo line
inputs can add live narration or music to the production. Perform creative
transitions, mix audio, and use the pattern generator and extensive
pattern library to set up downstream and upstream keyers, all from the
intuitive control panel. Flexible output options let you place a multiview
screen in your control room or at your workstation and a second monitor
that displays the live broadcast or any one of the incoming video sources.
The switcher’s built-in encoder automatically scales and deinterlaces
incoming video signals and outputs video to user-selected resolutions
up to 1080p. The live broadcast can be outputted to a broadcast device,
projector, or recorder, and simultaneously streamed to the internet via
the USB output.
THANK YOU FOR CHOOSING ELVID.
4
• Please read and follow these
instructions, and keep this
manual in a safe place.
• Keep this product away from
water and any ammable
gases or liquids.
• Do not expose this product
to humidity or extreme heat
or cold.
• Make sure this product is
powered off when plugging it
into a power source.
• Use only the correct,
recommended voltage.
• Do not attempt to disassemble
or repair this product—doing
so will void the warranty, and
Elvid will not be responsible for
any damage.
• Handle this product with care.
Avoid any impacts to this
product.
• Do not block the vents in this
product.
• Disconnect this product from
its power source before storage
and during electrical storms.
• Do not use chemical solutions
to clean this product. Clean it
with only a soft, dry cloth.
• Make sure that this product
is intact and that there are no
missing parts.
• All images are for illustrative
purposes only.
PRECAUTIONS
5
OVERVIEW
CONTENTS INCLUDE
• Power supply (12 V, 2 A)
• USB cable (USB Standard-A to Type-C)
• Tally connector (DE-15)
LINE 1 LINE 2
Mic/Line input
1 and 2
HDMI inputs 1–4
Multiview output
Program (PGM) output
USB Type-C™ port (output)
LAN port
Tally port
Power input
6
USB Standard-A port (input)
3.5 mm headphone output
7
VSW-4H-USB
MASTER
MIC 1 MIC 2
CHROMA
ON AIR ON AIR MIX
WIPE
PIP1
HDMI 2HDMI 1 HDMI 3 HDMI 4 LUMA
ON AIR ON AIR DIP
INV
EXIT
CUT
AUTO
PIP2
AFV
1 2 3 4
AUDIO ON
VOL+ VOL- DSK
ON AIR ON AIR
SPEED1
SPEED2
MUTE
FTB
PATTERN
STILL
1 2 3 4
PATTERN
STILL
PATTERN
STILL
MV
LOGO
Power
Program (PGM) selectors (1–4)
Preview (PVW) selectors (1–4)
Audio controls
Downstream Key (DSK)
selectors
Chroma/Luma
key selectors
Multiview
selector
Transition
effects
Menu
controls
Cut/Auto selectors
T-Bar
Mute / Fade to Black controls
Speed selectors
8
POWERING
THE
SWITCHER
1. Make source and output device connections.
2. Plug the power cord into the switcher and tighten the
locking ring until secure. Plug the power adapter into an
outlet.
3. Press the Power button to turn on the switcher.
To turn off:
1. Press and hold the Power button for 3 seconds.
2. Turn the Menu knob to select YES in the onscreen prompt,
then press the knob to select. The switcher will power down
after 3 seconds.
9
CONNECTING
THE INPUTS
VIDEO SOURCES
Plug HDMI cameras and other HDMI sources into the
switcher’s HDMI inputs 1–4.
Each of the HDMI windows will display the video signals when
viewing in the Multiview screen.
COMPUTER CONNECTIONS
Computers can be connected to the switcher via an HDMI
cable or with an appropriate adapter.
Note: When connecting a computer to one of the HDMI inputs,
you may need to set the computer display setting to mirror
the primary screen.
10
AUDIO CONNECTIONS
Connect microphones, an audio player, smartphone, or a
wireless receiver to the switcher’s audio inputs with a 3.5 mm
TRS audio cable.
The audio input accepts stereo unbalanced microphone and
line-level signals. To set the inputs to receive a mic- or line-
level signal, see the online user manual at elvidcinema.com.
Andere Handbücher für VSW-4H-USB
1
Inhaltsverzeichnis
Andere Elvid Schalten Handbücher
