Embed SmartTouch Swipe Bedienungsanleitung

smartTouch™

Swipe User Manual

Doc No. 720100010

Version 1

www.embedcard.com 1

Notice of Rights

means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of

Embed. For more information on getting permission for reprints and excerpts, contact Embed.

Notice of Liability

The information in this document is distributed on an “as is”basis, without warranty. While every precaution

has been taken in the preparation of this document, neither the author or Embed shall have any liability to any

person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the

instructions contained in this document or by the computer software or hardware products described herein.

www.embedcard.com

Embed Asia-Pacific –Head Office

2 Neil Street

Osborne Park, WA 6017

Australia

Telephone +61 (8) 9340 0100

Facsimile +61 (8) 9340 0199

Information: info@embed.com.au

Sales: sales@embed.com.au

Support: support@embed.com.au

Embed Middle East

#1504, Indigo Icon. PO Box

37307 Jumeirah Lakes Towers

Dubai, UAE

Telephone +971 (4) 4356331

Facsimile +971 (4) 4356332

Information: infoME@embedcard.com

Sales: salesME@embedcard.com

Support: supportME@embedcard.com

Embed North & South America

1621 West Crosby Rd.

Suite 100A

Carrollton, TX 75006 United States

Telephone (469) 521-8000

Facsimile (214) 260-0976

Information: info@embedcard.com

Sales: sales@embedcard.com

Support: USAsupport@embedcard.com

Embed UK and Europe

14 The Maltings

Brassmill Lane

Bath BA1 3JL United Kingdom

Telephone +44 (0)1225 311 323

Facsimile +44 (0)1225 445 217

Information: infoUK@embedcard.com

Sales: salesUK@embedcard.com

Support:supportUK@embedcard.com

www.embedcard.com 2

Table of Contents

LIST OF ACRONYMS .............................................................................................................................................. 2

SAFETY INFORMATION........................................................................................................................................3

PROTECTING AGAINST ELECTROSTATIC DISCHARGE ................................................................................................. 3

OTHER INFORMATION AND WARNINGS:..................................................................................................................... 3

INTRODUCTION ......................................................................................................................................................4

MAJOR COMPONENTS ............................................................................................................................................... 4

RECOMMENDED INSTALLATION HARDWARE ............................................................................................................ 5

PRE-INSTALLATION ..............................................................................................................................................6

SMARTTOUCH SWIPE READER INSTALLATION .......................................................................................... 7

VIDEO GAME INSTALLATION .................................................................................................................................... 9

HARNESS CONNECTIONS........................................................................................................................................... 9

POWER –12 VOLT DC............................................................................................................................................... 9

GAME CREDIT CONNECTIONS................................................................................................................................. 10

BASIC CONFIGURATION OF THE SMARTTOUCH SWIPE......................................................................... 11

HOW IT WORKS..................................................................................................................................................... 11

FCC PART 15B COMPLIANCE STATEMENT .................................................................................................. 12

CE –DECLARATION OF CONFORMITY ......................................................................................................... 12

VERSION HISTORY............................................................................................................................................... 13

Notice

All images presented in this document are for illustration purposes only.

All procedures in this document assume a degree of technical knowledge, only persons with the

appropriate qualifications and experience should implement these procedures.

List of Acronyms

Acronym

Description

STS

smartTouch Swipe

Wi-Fi

Wireless Fidelity / IEEE 802.11b Direct Sequence

Alternating Current

Direct Current

www.embedcard.com 3

Safety Information

This guide assumes that the installer is qualified to work on electrical devices, with electronic skills

and experience working with arcade machines.

Do not use in life critical or applications requiring high reliability

The smartTouch Swipe is not intended for use in systems that may affect human life or that require

a very high degree of reliability such as medical equipment, nuclear facilities, aerospace

equipment or transportation equipment. Embed does not assume any liability for accidents

resulting in injury or death, or for any damages to property that may occur as a result of using the

product in such facilities, equipment, or control systems.

Protecting against electrostatic discharge

Electrostatic discharge can damage electronic components including the Embed

smartTouch Swipe. Please observe electrostatic discharge precautions for handling

or installing this equipment.

Other information and warnings:

Embed smartTouch Swipe is intended for operation between 55 0C and -20 OC (131 0F

and -4 OF).

Embed smartTouch Swipe is not intended for domestic use.

www.embedcard.com 4

Introduction

This manual describes the requirements and steps needed to successfully install the smartTouch

Swipe. The scope of this document covers the hardware installation and the interface to common

Video game type.

Major Components

The smartTouch Swipe

The smartTouch Swipe is the guest facing device that features a touchscreen display with a

dedicated contactlesstype cards type reader. Guests will Swipe their card for the primary purpose

of transacting at games and attractions.

The device can be mounted in portrait or landscape orientations to best suite the game and guest

accessibility.

www.embedcard.com 5

Picture shows typical mounting of device on a game

Recommended Installation Hardware

The following is a recommended range of hardware to securely install and mount the smartTouch

Swipe reader. The smartTouch Swipe reader uses 4mm brass inserts inthe base of the enclosure

so the appropriate length 4mm metric screws must be used to properly secure the smartTouch

Swipe reader. All other hardware can be adjusted to what is most appropriate and available in

your area.

M4 metric, pan head, Philips drive, and zinc coated steel screws.

Used to secure the smartTouch to the surface of the game or attraction.

Recommended you have lengths of 10mm, 20mm and 25mm available as

a minimum.

M4 metric, zinc coated steel washers.

Recommended these are used under every screw.

M4 metric, zinc coated steel full width nuts

www.embedcard.com 6

Pre-Installation

Before the installation of any hardware, verify the following:

An adequate earth connection point exists in the game cabinet.

If the mounting surface is metal, that it is adequately earthed.

The game credits when a coin is inserted

The game accurately dispenses tickets

The coin and ticket meters increment correctly

Correct any identified faults and retest

Disconnect the power from the game

It is vital that you are certain the game is in proper working order before beginning the installation

of the Embed hardware. This will prevent confusion later in the process.

Never source and use wire taps or wire nuts. Wire taps cut into the wire and make a minimal

connection that will deteriorate over time leading to game credit and power supply related

problems. Wire nuts also offer a less-than-desirable connection on the small gauge wire used in

games.

We recommends that crimp type butt connectors be used for wire joins and splicing.

You will need some tools and hardware for the equipment installation and recommend the

following as a minimum.

Multi-meter

Drill

5 mm drill bit

Step drill bit up to 20mm

Phillips screwdriver

Wire stripper

Crimp tool for connectors

Butt connectors

Cable ties

Wire Swipe

Wire Nut

Butt Connector

www.embedcard.com 7

smartTouch Swipe Reader Installation

The smartTouch Swipe reader is best mounted and fixed to a location on the game that ensures

it’s easily accessible to guests. In many cases it’s recommended to mount the smartTouch Swipe

reader over the existing coin entry point as it is readily accessible and allows use of the existing

hole for cable entry.

The smartTouch Swipe reader display is usually mounted in landscape display orientation.

Step 1: Locate the ideal position to mount the smartTouch Swipe reader.

Step 2: Mark the spots for drilling. Use the smartTouch Swipe reader mounting template to mark

the four mounting points and the cable connection point.

Step 3: Drill the four mounting points with a 5mm drill-bit. Drill a harness connection hole with a

12.5mm step drill-bit. Clear the holes of sharp edges to protect the harness.

Step 4: Connect the harness to the connector in the bottom of the smartTouch Swipereader.

Feed harness through the hole in the cabinet and position the smartTouch Swipe reader to line

up with the screw mounting holes. Insert the correct length 4mm screws into the base of the

smartTouch Swipe reader and tighten.

Landscape Orientation

www.embedcard.com 8

Template for the smartTouch Swipe reader mount point drill holes. NOT TO 1:1 SCALE

This template is available in scale PDF format from suppor[email protected]m

www.embedcard.com 9

Video Game Installation

Standard type Video Games are typically strait forward to install with connections to the 12v DC

Power Supply and Credit Input only. From start to finish you can expect to take 25-35 minutes.

Harness Required

The harness required for this installation is the “Standard Video Harness”.

Harness Connections

Power –12 volt DC

Power to the IOC is supplied via the 12-way connector through the following pins:

Pin number

Wire Colour

Wire Function

ORANGE

DC +12 v

BLACK

DC Ground

Start by locating the game’s power supply, these are typically located in the base of the cabinet.

Identify and measure the 12v DC output ensure it is stable and ideally between 12-13v DC. Splice

in the Orange wire to +12v DC and the Black wire to DC Ground.

It is important for long term reliability that this this connection is made at, or as close as possible

to the Power Supply and not at a mid-point in the game harness or coin door.

Standard Video Harness –Part # IOC-005

Inhaltsverzeichnis

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch