LPC4088 Display Module - User’s Guide
Copyright 2015 © Embedded Artists AB
Embedded Artists products are subject to manufacturer’s guarantee as long as the products are
handled with adequate care and caution and in accordance to this manual.
For exact details about warranty, please read the General Terms and Conditions document that can be
found at http://www.embeddedartists.com/shop/
The warranty does not cover defects caused by improper or inadequate installation, maintenance or
handling by the user, unauthorized modification or misuse, operation outside the specification a non-
compliance of this manual and related documents. In case of doubt, please contact Embedded Artists
prior to intended activity.
Note that Embedded Artists does not replace boards where the LCD has been improperly
handled. Also note that the warranty does also not cover any defects or damages of other
equipment connected to the Embedded Artists product, faulty or not.
2.4 Code Read Protection
The LPC4088 microcontroller has a Code Read Protection function (specifically CRP3, see datasheet
for details) that, if enabled, will make the LPC4088 impossible to reprogram (unless the user program
has implemented such functionality in firmware).
Note that Embedded Artists does not replace LPC4088 Display Modules where the LPC4088 has
CRP3 enabled. It’s the user’s responsibility to not invoke this mode by accident.
2.5 CE Assessment
The LPC4088 Display Module is CE marked. See separate CE Declaration of Conformity document.
The LPC4088 Display Module is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
EMC emission test has been performed on the LPC4088 Experiment Bundle. Standard interfaces like
Ethernet, USB, serial have been in use. General expansion connectors where internal signals are
made available (for example processor pins) have been left unconnected. Connecting other devices to
the product via the general expansion connectors may alter EMC emission. It is the user’s
responsibility to make sure EMC emission limits are not exceeded when connecting other devices to
the general expansion connectors of the LPC4088 Display Module.
2.6 Other Products from Embedded Artists
Embedded Artists have a broad range of microcontroller based boards that are very low cost and
developed for prototyping / development as well as for OEM applications (i.e., for integration).
Modifications for OEM applications can be done easily, even for modest production volumes. Contact
Embedded Artists for further information about design and production services.
2.6.1 Design and Production Services
Embedded Artists provide design services for custom designs, either completely new or modification to
existing boards. Specific peripherals and I/O can be added easily to different designs, for example,
communication interfaces, specific analog or digital I/O, and power supplies. Embedded Artists has a
broad, and long, experience in designing industrial electronics in general and with NXP’s LPC
microcontroller families in specific. Our competence also includes wireless and wired communication
for embedded systems.
Contact us at info@EmbeddedArtists.com for a discussion about how we can help you!
2.6.2 OEM / LPCXpresso / QuickStart Boards and Kits
Visit Embedded Artists’ web page, www.EmbeddedArtists.com, for information about other products.
