Embedded Solutions USB-DIO-96 Bedienungsanleitung

MODEL USB-DIO-96

USB 96 CHANNEL

DIGITAL INPUT/OUTPUT MODULE

USER MANUAL

FILE: MUSB-DIO-96.A1f

ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101, San Diego, CA 92117-4345

P. +1 858 490-0597 F. +1 858 490-0599

e-mail: [email protected]; web: www.adl-usa.com

Embedded Solutions

Manual USB-DIO-962

Notice

The information in this document is provided for reference only. ADL Embedded Solutions

Inc. does not assume any liability arising out of the application or use of the information or

products described herein. This document may contain or reference information and

products protected by copyrights or patents and does not convey any license under the

patent rights of ADL Embedded Solutions Inc., nor the rights of others.

IBM PC, PC/XT, and PC/AT are registered trademarks of the International Business

Machines Corporation.

WARNING!!

ALWAYS CONNECT AND DISCONNECT YOUR FIELD CABLING WITH THE

COMPUTER POWER OFF. ALWAYS TURN COMPUTER POWER OFF

BEFORE INSTALLING A CARD. CONNECTING AND DISCONNECTING

CABLES, OR INSTALLING CARDS INTO A SYSTEM WITH THE COMPUTER

OR FIELD POWER ON MAY CAUSE DAMAGE TO THE I/O CARD AND WILL

VOID ALL WARRANTIES, IMPLIED OR EXPRESSED.

Manual USB-DIO-963

Table of Contents

Chapter 1: Introduction...................................................................................................... 4

Features........................................................................................................................... 4

Applications .................................................................................................................... 4

Functional Description ................................................................................................... 5

Figure 1-1: Block Diagram .......................................................................................... 6

Ordering Guide................................................................................................................ 6

Model Options ................................................................................................................. 6

Special Order................................................................................................................... 6

Included with your board ............................................................................................... 7

Optional Accessories ..................................................................................................... 7

Chapter 2: Installation........................................................................................................ 8

Software CD Installation................................................................................................. 8

Hardware Installation...................................................................................................... 8

Chapter 3: Hardware Details.............................................................................................. 9

Option Selections ........................................................................................................... 9

Figure 3-1: 96 Channel Board Option Selection Map ............................................... 9

USB Connector ............................................................................................................... 9

Embedded USB Connector ............................................................................................ 9

LED................................................................................................................................. 10

DC Power Jack (Optional) ............................................................................................ 10

50 Pin Box Headers ...................................................................................................... 10

5V Resettable Fused Outputs ...................................................................................... 10

Pull-Up / Pull-Down Configuration Jumpers............................................................... 10

Chapter 4: USB Address Information ............................................................................. 11

Chapter 5: Programming ................................................................................................. 12

unsigned long DIO_Configure(DeviceIndex, bTristate, pOutMask, pData).............. 12

unsigned long DIO_WriteAll(DeviceIndex,pData) ...................................................... 12

unsigned long DIO_ReadAll(DeviceIndex,Buffer) ...................................................... 12

Chapter 6: Connector Pin Assignments......................................................................... 13

Table 6-1: 50-Pin Connector Pin Assignments ....................................................... 13

Chapter 7: Specifications................................................................................................. 14

Customer Comments ......................................................... Error! Bookmark not defined.

Manual USB-DIO-964

Chapter 1: Introduction

Features

• 96 lines of digital I/O

•High-speed USB 2.0 device, USB 1.1 backwards compatible

•Twelve (12) 8-bit ports independently selectable for inputs or outputs

•All I/O lines buffered with 32 mA source, 64mA sink current capabilities

•I/O buffers can be enabled or tri-stated under program control

• Drivers and sample application provided

•Jumper selectable I/O pulled up to 5V, pulled down to ground or floating

•Jumper selectable power provided via USB cable or external power supply for higher

current sourcing capabilities

•Resettable fused +5VDC output per I/O connector

•Standard 50-pin IDC-type shrouded connectors with key

•PC/104 size board (3.550 by 3.775 in.)

•Rugged industrial enclosure

•Compatible with Industry-Standard I/O Racks such as Gordos, OPTO22, Potter &

Brumfield, etc.

Applications

• Automatic Test Systems

• Laboratory

Automation

• Robotics

• Machine

Control

•Security Systems, Energy Management

•Relay Monitoring and Control

•Parallel Data Transfer to PC

•Sensing Switch Closures or TTL, DTL, CMOS Logic

•Driving Indicator Lights or Recorders

Manual USB-DIO-965

Functional Description

This USB board is an ideal solution for adding portable, easy-to-install digital I/O capabilities to

any computer with a USB port. The board is a USB 2.0 high speed device, offering the fastest

speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports.

The card is plug-and-play allowing quick connect/disconnect whenever you need additional I/O

on your USB port.

The board features 96 lines of TTL-compatible digital I/O with high-current capabilities. Each

digital port can be programmed to accept inputs or to drive outputs in 12 groups of 8-bit ports.

Power is supplied to the card via the USB cable or for higher current capabilities, external

power may be used. The I/O wiring connections are via four industry standard 50-pin

connectors. For external circuits, fused +5VDC power is available at the each connector. The

two resettable fuses are rated at 0.5A, with each fuse feeding two I/O connectors.

All I/O lines are buffered by a type 74ABT543A tristate buffer transceiver capable of sourcing

32 mA or sinking 64 mA. The buffers are configured under program control for input or output.

Jumper selectable pull-ups (to +5 VDC) or pull-downs (to ground) on the card allow for contact

monitoring and assure that there are no erroneous outputs at power-up until the card is

initialized by system software.

Unlike most USB digital I/O products which primarily use a human interface device (HID)

driver, we provide an easy to use, Windows-based, custom function driver optimized for

maximum data throughput. This approach exposes the full functionality of the hardware along

with maximizing the advantage of using the high-speed USB 2.0 bus.

Manual USB-DIO-966

Figure 1-1: Block Diagram

Ordering Guide

USB-DIO-96 USB 96-channel digital input/output module

Model Options

•-OEM Board only version with no enclosure

•-DIN DIN rail mounting bracket for integrating into existing DIN rail systems

•-P On-board DC power circuitry and external power AC/DC adapter

•-RoHS This product is available in a RoHS compliant version. Please call for specific

pricing then be sure to add this suffix to the model number on any hard-copy

or verbal purchase orders.

Special Order

Contact factory with your special requirement. Examples of special orders would be

conformal coating, latching I/O headers.

Manual USB-DIO-967

Included with your board

The following components are included with your shipment, depending on options ordered.

Please take the time now to ensure that no items are damaged or missing.

•USB Module in labeled enclosure with an anti-skid bottom

•6' USB 2.0 cable

•Software Master CD

•USB I/O Quick-Start Guide

Optional Accessories

•CAB50F-6 Six-foot ribbon cable assembly with

50-pin female connectors

•CAB50-6

Six-foot ribbon cable assembly with

a 50-pin female header connector

and a 50-pin female edge connector

•STB-50

Screw terminal board, typically ships

with standoffs but can also mount on

SNAP-TRACK or DIN-SNAP

•DIN-SNAP-6

Six inch length of SNAP-TRACK with

two clips, for mounting one STB-50

screw terminal board on a DIN rail

•DIN-SNAP

One foot length of SNAP-TRACK with

four clips, for mounting up to two STB-50

screw terminal boards on a DIN rail

•MP104-DIN DIN-rail mounting adapter plate for

affixing any USB/104 module to a DIN-rail

Manual USB-DIO-968

Chapter 2: Installation

Software CD Installation

The software provided with this board is contained on one CD and must be installed onto your

hard disk prior to use. To do this, perform the following steps as appropriate for your software

format and operating system. Substitute the appropriate drive letter for your CD-ROM or disk

drive where you see G in the examples below.

WIN NT/2000/XP/2003

a. Place the CD into your CD-ROM drive.

b. The install program should automatically run. If it does not click START | RUN and type

GLQVWDOO, click OK or press ..

c. Follow the on-screen prompts to install the software for this board.

Hardware Installation

The board can be installed in any USB 2.0 or USB 1.1 port. Please refer to the USB I/O Quick

Start Guide which can be found on the CD, for specific, quick steps to complete the hardware

and software installation.

Manual USB-DIO-969

Chapter 3: Hardware Details

Option Selections

Refer to the setup programs on the CD provided with the board. Also, refer to the Block

Diagram and the Option Selection Map when reading this section of the manual.

Figure 3-1: 96 Channel Board Option Selection Map

USB Connector

The USB connector is a Type B high-retention type connector and mates with the cable

provided. The USB port provides communication signals along with +5 VDC power. The board

can be powered from the USB port or, if needed for higher source current applications, an

external power supply can be used.

Embedded USB Connector

Micro 5-pin header in parallel with type B connector to provide a compact interface within

embedded devices.

Manual USB-DIO-9610

LED

The LED on the front of the enclosure is used to indicate power and data transmissions. When

the LED is in an illuminated steady green state, this signifies that the board is successfully

connected to the computer and has been detected and configured by the operating system.

When the LED flashes continuously, this signifies that there is data being transmitted over the

USB bus.

DC Power Jack (Optional)

This is an option for high current applications when more current is needed than what your

computer can provide on the USB port (typically 500 mA). The DC jack has a 2.00mm post on

board and is designed to be used with the 9 VDC AC/DC external power supply that ships with

this option. The voltage regulator on board regulates the 9 VDC and provides 5 VDC to the

onboard circuitry. When using external power, switch the jumper located near the USB

connector to VEXT, otherwise when the jumper is in the VUSB position current is drawn from

the USB port (please consult the option selection map for a visual reference).

50 Pin Box Headers

The 50 pin box headers have standard 0.100" spacing between pins and are keyed to prevent

improper connections. It can be used with standard IDC type ribbon cables.

5V Resettable Fused Outputs

Two 0.5A resettable fuses each feed two I/O connectors at pin 49 used to power external

module racks or relay boards, or for general purposes. If an over-current persists on a circuit

protected by a resettable fuse, it will open interrupting power to the circuit. The amount of time

it takes the fuse to act depends on the amount of over-current and other conditions such as

ambient temperature, humidity, etc. The fuse will remain open until the bi-metal elements cool

sufficiently, at which time the circuit will be restored.

Pull-Up / Pull-Down Configuration Jumpers

Each connector's digital bits can be pulled up or down, or left floating, when in input mode or

tristated. For pull-ups (most common), install these jumpers in the +5V position. For pull-

downs, install these jumpers in the GND position. For neither, remove these jumpers.

Inhaltsverzeichnis

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung