EMC VNXe3100 Bedienungsanleitung

EMC®VNX™

VNXe3100™

Installation Guide

P/N 300-011-183

REV 05

VNXe3100 Installation Guide

Published June, 2012

EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without

notice.

The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect

to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular

purpose. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.

EMC2, EMC, EMC Centera, EMC ControlCenter, EMC LifeLine, EMC OnCourse, EMC Proven, EMC Snap, EMC SourceOne, EMC Storage

Administrator, Acartus, Access Logix, AdvantEdge, AlphaStor, ApplicationXtender, ArchiveXtender, Atmos, Authentica, Authentic

Problems, Automated Resource Manager, AutoStart, AutoSwap, AVALONidm, Avamar, Captiva, Catalog Solution, C-Clip, Celerra,

Celerra Replicator, Centera, CenterStage, CentraStar, ClaimPack, ClaimsEditor, CLARiiON, ClientPak, Codebook Correlation

Technology, Common Information Model, Configuration Intelligence, Connectrix, CopyCross, CopyPoint, CX, Dantz, Data Domain,

DatabaseXtender, Direct Matrix Architecture, DiskXtender, DiskXtender 2000, Document Sciences, Documentum, elnput, E-Lab,

EmailXaminer, EmailXtender, Enginuity, eRoom, Event Explorer, FarPoint, FirstPass, FLARE, FormWare, Geosynchrony, Global File

Virtualization, Graphic Visualization, Greenplum, HighRoad, HomeBase, InfoMover, Infoscape, InputAccel, InputAccel Express, Invista,

Ionix, ISIS, Max Retriever, MediaStor, MirrorView, Navisphere, NetWorker, OnAlert, OpenScale, PixTools, Powerlink, PowerPath,

PowerSnap, QuickScan, Rainfinity, RepliCare, RepliStor, ResourcePak, Retrospect, RSA, SafeLine, SAN Advisor, SAN Copy, SAN

Manager, Smarts, SnapImage, SnapSure, SnapView, SRDF, StorageScope, SupportMate, SymmAPI, SymmEnabler, Symmetrix,

Symmetrix DMX, Symmetrix VMAX, TimeFinder, UltraFlex, UltraPoint, UltraScale, Unisphere, Viewlets, Virtual Matrix, Virtual Matrix

Architecture, Virtual Provisioning, VisualSAN, VisualSRM, VMAX, VNX, VNXe, Voyence, VPLEX, VSAM-Assist, WebXtender, xPression,

xPresso, YottaYotta, the EMC logo, and the RSA logo, are registered trademarks or trademarks of EMC Corporation in the United States

and other countries. Vblock is a trademark of EMC Corporation in the United States.

All other trademarks used herein are the property of their respective owners.

For the most up-to-date regulatory document for your product line, go to the technical documentation and advisories section on the

EMC online support website.

EMC VNXe3100 Installation Guide

CONTENTS

Unpack your system

Unpack the shipping boxes ........................................................................................ 4

Prepare your system

Before you begin ........................................................................................................ 5

Installation requirements ........................................................................................... 5

Rack & Install

Install the disk processor enclosure (DPE) .................................................................. 7

Install the DPE rails .............................................................................................. 7

Install the disk processor enclosure ..................................................................... 8

Install Disk Array Enclosures (DAEs).......................................................................... 10

Install the DAE rails ............................................................................................ 10

Install the disk array enclosures ......................................................................... 11

Cable the DPE to DAE ............................................................................................... 12

Attach storage processors to the network ................................................................. 14

Power up.................................................................................................................. 15

Verify status LEDs..................................................................................................... 17

Attach the bezels ..................................................................................................... 18

Connect

Automatically Assigning a Dynamic VNXe Management Port IP Address.................... 20

Manually Assigning a Static VNXe Management Port IP Address ............................... 21

VNXe3100 Installation Guide

Unpack your system

This document applies to both single and dual SP configurations. If you have a single SP

configuration, ignore references to SP B.

Unpack the shipping boxes

Verify that you have received all of the system components, including cables, bezels, rails, and

screws (shown below).

Figure 1 Shipping Contents

Disk-array enclosure (Optional)

(DAE)

Disk processor enclosure

(DPE)

SAS (serial attached SCSI) cables

2 per DPE

1 per DPE

Bezel with key

6Gb SAS

Installation

SAS 450 GB 15K RPM

Installation

SAS 450 GB 15K RPM

Front

Rear

Adjustable rail kit

Screws

Power cords

2 per DAE

Service cable

2 per DAE

Front

Rear

Adjustable rail kit

Screws

Power cords

Bezel with key

Documentation kit, including Installation

Guide, Quick Start poster, Configuration

Worksheet and sheet of cable labels.

Before you begin

Prepare your system

Use the “Before you begin” checklist to help you determine what you need to install for your

system.

Before you begin

Installation requirements

Completed Task Comments

1. Setup a product support account. If you do not already have a Product Support account, go to

EMC.com/vnxesupport to set one up.

You will need a support account for access to the latest

documentation and troubleshooting information, online

chat, installation and maintenance videos, utilities and

wizards.

2. Complete the VNXe Series

Configuration Worksheet.

The VNXe Series Configuration Worksheet is provided in the

documentation package with the system.

It is also available for download from the VNXe Product page.

Requirement Description

AC Power For high availability: At least two 110 or 240 V AC circuits are required.

Types of plugs: C13 and C14

Network • Two 1-Gigabit Ethernet management connections

• Two to four 1-Gigabit Ethernet data connections for CIFS, NFS, and iSCSI connectivity

• CAT5e or better cables for each connection to network

• DNS and NTP servers accessible from the VNXe system (recommended)

• Windows Domain Controller (recommended)

• SMTP server network connection to the VNXe3100 and the management host (optional)

Network

information

If you are using the VNXe Connection Utility, the management port and login information required

include:

• A static IP address for the system

• The subnet mask of the LAN to which the system is connected

• The default gateway address of the LAN to which the system is connected

• System usernames and passwords

If you are setting up the system on a network with DHCP servers, DNS servers, and Dynamic DNS

services, you need:

• system serial number

• domain information

VNXe3100 Installation Guide

Space Cabinet vertical space 2U (3.5 inches, 8.9 cm) for the disk processor enclosure (DPE)

Cabinet vertical space for each optional DAE, 2U each

Tools Slotted or Phillips screwdriver

Management

Console

A Windows-based computer to run the initialization, maintenance, and management tools with:

• At least 100 MB of free space

• Connection on same LAN subnet as your VNXe system (recommended)

• Web browser* (Internet Explorer, Mozilla Firefox, Google Chrome)

•AdobeFlashPlayer*

*Supported versions are listed in the release notes.

Requirement Description

Install the disk processor enclosure (DPE)

Rack & Install

Install the disk processor enclosure (DPE)

Install the DPE rails

Install the DPE rails first, at the bottom of the space reserved for the VNXe system in your cabinet.

Any DAEs should be installed above the DPE.

1. Locate the 2U adjustable rail kit for the DPE, and identify the left rail (marked with an L on the

front), and the right rail (marked with an R on the front).

2. Insert the alignment pins at the end of the left rail into the rear channel of your cabinet.

3. Extend the adjustable rail so that it reaches the front channel of the cabinet and check the

alignment of the rail to ensure that the front of the rail is level with the back. Once you are

satisfied with the alignment, insert one screw from the front of the cabinet into the rail’s

bottom screw hole as shown in Figure 2.

4. Insert two retention screws through the back of the cabinet to secure the rail.

Figure 2 Installing the DPE rails

Front

Threaded

screw hole

Screws hold the

rails in place

Alignment pins

Threaded

screw holes

Detail

Right rear

VNXe3100 Installation Guide

5. Repeat steps 2-4 to attach the right DPE rail, making sure that the right rail is level with the left

rail.

6. Tighten the rail screws at both the front and back of the cabinet.

Install the disk processor enclosure



Two people are required to install the components. Do not attempt to lift and install the

enclosure into a rack without a mechanical lift or help from another person.

1. Locate the Product ID/SN from the product serial number tag (PSNT) located at the back of the

DPE. Record this number on the VNXe Series Configuration Worksheet to use when you

Note: Do not remove the PSNT tag from the enclosure.

Figure 3 Location of the PSNT tag on the back of the DPE

2. Slide the DPE into the 2U DPE rails in the cabinet until the rear of the DPE is seated in the tabs

on the rails.

3. Insert four screws into the DPE (front) bracket screw holes and into the cabinet as shown in

Figure 4 on page 9. It may be easier to install the screws working in a diagonal pattern, such as

bottom left and top right, bottom right and top left.

VNXe-000780

PSNT

Install the disk processor enclosure (DPE)

4. When the DPE is in place, tighten all of the screws.

Figure 4 Installing the DPE

Disk-processor enclosure

4 screws hold the

component in the cabinet

(2 screws each side)

Front

Alignment pins

Front detail

Brackets are attached

to the components

VNXe-000779

VNXe3100 Installation Guide

Install Disk Array Enclosures (DAEs)

All DAEs are optional. Any DAEs should be installed immediately above the DPE.

Install the DAE rails

To install the DAE rails:

1. Locate the 2U adjustable rail kit for the DAE, and identify the left rail (marked with an L on the

front), and the right rail (marked with an R on the front).

2. Insert the alignment pins at the back of the left rail into the rear channel of your cabinet.

3. Extend the adjustable rail so that it reaches the front channel of the cabinet and check the

alignment of the rail to ensure that the front of the rail is level with the back. Once you are

satisfied with the alignment, insert one screw from the front of the cabinet into the rail’s

bottom threaded screw hole as shown in Figure 5.

4. Insert two retention screws from the back of the cabinet to attach the rail.

5. Repeat steps 2-4 to attach the right DAE rail, making sure that the right rail is level with the left

rail.

Figure 5 Installing the DAE rails

Front

Threaded

screw hole

Screws hold the

rails in place

Alignment pins

Threaded

screw holes

Detail

Right rear

Andere Handbücher für VNXe3100

Inhaltsverzeichnis

Andere EMC Disk-Array-System Handbücher

EMC

EMC iomega StorCenter px12-350r Bedienungsanleitung

Beliebte Disk-Array-System Handbücher anderer Marken

Fujitsu

Fujitsu ETERNUS DX60 S2 Bedienungsanleitung

Accom

Accom WSD/2XTREME Bedienungsanleitung

HP Compaq Presario,Presario 4400 Gebrauchsanweisung

ATTO Technology

ATTO Technology Diamond Storage Array V-Class Bedienungsanleitung

National Instruments

National Instruments RMX-8268 Bedienungsanleitung

Overland Tandberg

Overland Tandberg SnapServer DX1 Bedienungsanleitung

easyRAID

easyRAID Q08QA-2GR2 Bedienungsanleitung

NEC

NEC NF2300-SR412E Bedienungsanleitung

Infortrend

Infortrend EonStor A08U-C2411 Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik M-F3 Bedienungsanleitung

Buffalo

Buffalo HD-QHU3R5 Bedienungsanleitung

Addonics Technologies

Addonics Technologies Z4SN25NML Bedienungsanleitung

HP StorageWorks P2000 Leitfaden

HP StorageWorks XP128 Bedienungsanleitung

HP 4400 Enterprise Bedienungsanleitung

G-Technology

G-Technology G-RAID2 Bedienungsanleitung

HP STORAGEWORKS XP24000 Bedienungsanleitung

Bosch

Bosch DVA-16K SCSI Bedienungsanleitung