Emerson Copeland 4MTL-05 Handbuch

TI_Stream_NGCS_04_E_Rev04 1/2

Date of last update: Mar-21

Ref: TI_Stream_NGCS_04_E_Rev04

Application Engineering Europe

COPELAND™ COMPRESSOR ELECTRONICS

FOR COPELAND™ STREAM COMPRESSORS – QUICK INSTALLATION GUIDE

The Copeland™Compressor Electronics module (previously Next Generation CoreSense) is located in the Stream

compressor terminal box. It is prewired to the oil pressure sensor (for compressors with an oil pump), the motor

thermistor chain (PTC), the discharge temperature sensor and the current sensor.

Figure 1: Terminal box Figure 2: Internal view of terminal box

1. Unscrew the 4 screws located in the corners of the compressor terminal box cover and lift off the terminal box

cover.

2. Open the cover of the Copeland Compressor Electronics module to access the terminals.

Figure 3: Copeland Compressor Electronics module cover open Figure 4: Current sensor

3. Supply 115 V or 230 V power (N and L1) to the module on extreme left terminals 1 and 2 (both polarities are

possible).

4. Position the jumpers according to starting method and motor type. The jumper position is given on the compressor

wiring diagram.

5. Connect the power supply to the terminal plate.

6. Caution! For part-winding, the power leads from the same phase should go through the current sensor in the

same direction.

TI_Stream_NGCS_04_E_Rev04 2/2

7. Connect the Copeland Compressor Electronics module cables for the phase monitoring to terminals U/V/W (2

times 3 cables for each winding, grey GR, black BK and brown BN wires), and to the earth PE (pink PK wire).

IMPORTANT

For Stream CO2small and medium compressor models (4MTL-05 to 4MTL-30 & 4MSL-

03 to 4MSL-15), the blue positions 1U, 2V, 3W, 7Z, 8X, 9Y in diagram below must be

considered. The position of the terminals in all the other Stream compressor models

corresponds to the black positions. The factory delivery is correct, DO NOT reverse the

connections.

Figure 5: Wiring diagram –Connections for phase monitoring Figure 6: Control circuit connection

8. Connect the control circuit phase (L) to terminal 19 (Figure 6).

9. Connect the crankcase heater to terminals 3 and 4, and to earth. The Copeland Compressor Electronics module

controls the crankcase heater directly, so only a crankcase heater with the same power supply as the module

(115 VAC or 230 VAC) can be selected.

Figure 7: Wiring diagram –Crankcase heater connections

NOTE: This document is for quick installation purposes. For detailed instructions, please refer to Technical

Information TI_Stream_NGCS_01_E "Copeland™Compressor Electronics for Copeland™Stream

Compressors".

Andere Handbücher für Copeland 4MTL-05

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Luftkompressor Handbücher

Emerson

Emerson CopeLand CoreSense 571-0065-04 Benutzerhandbuch

Emerson

Emerson CORESENSE Handbuch

Emerson

Emerson COPELAND ZO18AG Bedienungsanleitung

Emerson

Emerson XEV02D Verdrahtungsschema

Emerson

Emerson ZPK3E Series Bedienungsanleitung

Emerson

Emerson Copeland Scroll ZB50KCE Bedienungsanleitung

Emerson

Emerson Copeland Scroll Referenzhandbuch

Emerson

Emerson Copeland Stream 4MF-13X Bedienungsanleitung

Emerson

Emerson Copeland YB56K1G Bedienungsanleitung

Emerson

Emerson Liebert.CRV+ Bedienungsanleitung

Emerson

Emerson Copeland Scroll ZPV066 Handbuch

Emerson

Emerson Vilter VSG128 Einrichtungshandbuch

Emerson

Emerson Copeland Scroll K5 Series Benutzerhandbuch

Emerson

Emerson Copeland YBD17K1E Bedienungsanleitung

Emerson

Emerson Copeland Scroll ZP K6 Series Handbuch

Emerson

Emerson Copeland ZB12KCU Bedienungsanleitung

Emerson

Emerson Copeland Scroll ZB KC Series Handbuch

Emerson

Emerson Copeland Scroll SZO22 Gebrauchsanweisung

Emerson

Emerson VSG & VSSG Montageanleitung

Emerson

Emerson Copeland Discus Series Bedienungsanleitung

Emerson

Emerson COPELAND ZH04K1P Bedienungsanleitung

Emerson

Emerson Copeland Scroll ZH13 KVE Bedienungsanleitung

Emerson

Emerson Copeland Scroll YH04K1E Bedienungsanleitung

Emerson

Emerson Copeland YA K1 Series Bedienungsanleitung

Beliebte Luftkompressor Handbücher anderer Marken

Sparmax

Sparmax DC-25XR Bedienungsanleitung

KAESER

KAESER M122 Bedienungsanleitung

GMC

GMC GAC1500 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton Air Compressor Bedienungsanleitung

Fini

Fini F3GST2TK Bedienungsanleitung

Industrial Air

Industrial Air CP1580325 Programmierhandbuch

Campbell Hausfeld

Campbell Hausfeld RP3300 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Bedienungsanleitung

Hitachi

Hitachi EC99S Bedienerhandbuch

Parkside

Parkside PKO 270 A1 Bedienungsanleitung

Sullair

Sullair 185 Bedienungsanleitung

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Bedienungsanleitung

Ferm

Ferm CRM1046 Bedienungsanleitung

BE AC153 Bedienungsanleitung

RIDGID

RIDGID OF25150A Bedienungsanleitung

Johnson Controls

Johnson Controls QUANTUM LX Handbuch

Sears

Sears Craftsman 919.167463 Bedienungsanleitung

Ring Automotive

Ring Automotive RAC700 Bedienungsanleitung