Emerson PACSystem RX3i Bedienungsanleitung

PACSystem™ RX3i Central Processing

UnitIC695CPE305

QuickStartGuide

GFK-2934B

Sept2019

 
i PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B 
Contents 
User Features ................................................................................. 2 
Switches ....................................................................................... 4 
Switch Operation ............................................................................ 4 
Real-Time Clock Battery .................................................................... 5 
Ethernet Port ................................................................................. 5 
Serial Port ..................................................................................... 6 
Removable Data Storage Devices (RDSDs) ............................................. 6 
Energy Pack ................................................................................... 7 
Light-Emitting Diode Indica tors (LEDs) .................................................. 7 
Hardware Ins tallation......................................................................10 
Initial Checks .....................................................................................................10 
Installation Location.......................................................................................... 10 
Installation in Hazardous Areas ..........................................................11 
Class 1 Divison 2 Groups ABCD .........................................................................11 
ATEX Zone 2......................................................................................................12 
Module Installation.........................................................................12 
Module Initial Sta rtup .....................................................................13 
Initial Configuration .......................................................................................... 14 

2 PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B

User Features

The PACSystems™RX3i CPE305can be usedto perform real time control of

machines, processes, andmaterial handlingsystems. The CPU

communicateswith the programmerviathe internal Ethernet portor a

serial port. It communicates with I/O and IntelligentOption modules over a

dual PCI/Serial backplane.

▪Supports an updated OPC stack and encrypting connections

▪Supports PME’s new GUI management interface for OPC UA configuration

integration (start, stop, restart, clear, and provisioning mode)

▪Supports the new PAC Security tool available for certificate trust management

of clients and servers

▪Contains 5 Mbytes of user memory and 5 Mbytes of non-volatile flash user

memory

▪Supports Battery-less retention of user memory

▪Configured with an Energy Pack IC695ACC400 to power the CPU long enough

to write user memory to non-volatile storage (NVS) on system power loss

▪Equipped with configurable data and program memory

▪Supports programming in Ladder Diagram, Structured Text, Function Block

Diagram, and C

▪Supports auto-located Symbolic Variables that can use any amount of user

memory

▪Equipped with reference table sizes to include 32 Kbits for discrete %I and %Q

and up to 32Kwords each for analog %AI and %AQ

3 PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B

▪Supports most Series 90-30 modules and expansion racks. For supported I/O,

Communications, Motion, and Intelligent modules, refer to the PACSystems

RX3i Hardware and Installation Manual, GFK-2314

▪Supports up to 512 program blocks (Maximum size for a block is 128KB)

▪Configured with an RS-232 serial port

▪Enabled with an embedded Ethernet interface to support up to 32

simultaneous SRTP Server connections, up to 16 simultaneous Modbus/TCP

Server connections, and up to 16 simultaneous communications channels of

either SRTP Channels or Modbus/TCP Client channels. For details, refer to the

PACSystems RX3i TCP/IP Ethernet Communications User Manual, GFK-2224

▪Supports OPC UA

▪Supports Ethernet Global Data, Class 1

▪Supports HART®Pass Through

▪Time synchronization to SNTP Time Server on Ethernet network when used

with a rack-based Ethernet module (IC695ETM001) version 5.0 or later

▪Enhanced ability to display serial number and date code in PME’s D e vice

Information Details.

▪Ability to transfer applications to and from USB 2.0 A type removable data

storage devices, or RD SDs.

▪Compliant with EU RoHS Directive 2002/95/EC using the following

exemptions identified in the Annex: 7(a), 7(c)-I and III, and 15.

HART®is a registered trademark of the HART Communication Foundation of Austin, Texas

USA. Any use of the term HART hereafter in this document, or any document referenced by

this document, implies the registered trademark.

4 PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B

Switches

The RDSD and Run Mode switches are located behind the front protective

door. The Reset switch isnot used. Switch operation isgiven in the

followingtable.

Switch Operation

RDSD Switches

Function

Start pushbutton

Pressing this switch initiates RDSD data transfer. (The

three-position switch must be set to Upload or

Download.)

Three-position switch

Enables/disables RDSD data transfer and selects the

direction of data transfer.

Upload

Loads application from CPU to RDSD.

Off

Disables RDSD data transfer.

Download

Stores application from RDSD to CPU.

Run Mode Switch

A three-position switch which operates as follows:

Switch Position

CPU and Sweep Mode

Memory Protection

Run I/O Enable

The CPU runs with I/O sweep

enabled.

User program memory is

read only.

Run Output Disable

The CPU runs with outputs

disabled.

User program memory is

read only.

Stop

The CPU is not allowed to go

into Run mode.

User program memory

can be written.

The Run Mode switch can be disabled in the programming software in Hardware

Configuration (HWC). The switch’s memory protection function can be disabled

separately in HWC. The Run Mode switch is enabled by default. The memory

protection functionality is disabled by default.

5 PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B

Real-Time Clock Battery

The CPE305 is shipped with a real time

clock (RTC) battery (IC690ACC001)

installed, with a pull-tabon the battery.

The pulltabshould be removed before

installing the CPE305.

There are no diagnosticsor indicators to

monitor RTC battery status. The RTC

battery has an estimated life of 5 years

and must be replaced every 5 years on a

regular maintenance schedule. If the RTC

battery fails, the CPU date andtime is

reset to 12:00 AM, 01-10-2000 at startup.

The CPU operates normally with a failed

or missing RTC battery; only the initial

CPU Time-of-day (TOD) clock information

will be incorrect.

Figure 1: Real-Time Clock

Battery

Ethernet Port

The embedded Ethernetinterface supports communications withthe

Machine Edition programming software usingthe proprietary SRTP

protocol. The CPE305 CPU provides two SRTP server connections.

The embedded Ethernetinterface has one RJ-45Ethernetport that

automatically senses the data rate (10 Mbps or 100 Mbps), duplex status

(half or full duplex), andcabling arrangement (straight through or

crossover)of the attached link.

6 PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B

Serial Port

The CPE305 provides one RS-232serial interfaceto external devices. This

port can be used for firmware upgrades. The port is electrically isolated. For

serial port pinassignments anddetailson serial communications, refer to

the PACSystems RX3i CPUReference Manual, GFK-2222.

The RS-232 port does not supply the 5 VDC power offered by other RX3i

and Series 90-30 CPUs.Cable IC693CBL316 must be used for RS-232 serial

connections to the CPE305.

RemovableData StorageDevices

(RDSDs)

The CPE305 provides the ability to transfer applications to and from an

RDSD (USB compatible device, such as a memory stick, smart phone, digital

cameraor MP3 device). Once the datais copied to the RDSD, it can be

written to other RX3i CPE305 CPUs with no programmer software needed.

The RDSD interface requires auser-supplied flashmemory devicethat

complies with the USB 2.0 Specification.

The USB port must be enabled in the RX3i configuration in order to transfer

data between theCPU andthe RDSD. The CPE305 is shipped with theRDSD

(USB)port enabled. Completedetailsof the use of RDSDsare foundin the

PACSystems RX3i CPU ReferenceManual,GFK-2222.

7 PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B

Energy Pack

The CPE305 preserves user memory using an Energy Pack without theneed

to periodically replace batteries. TheIC695ACC400 Energy Pack powers the

CPU long enough for the CPU to writeits user memory contents to the

CPU’s non-volatile storage during asystem power loss. Installation of the

Energy Pack is found below.

Light-EmittingDiodeIndicators(LEDs)

OK —indicates module readiness to perform normal operations.

Green, ON

steady

CPU passed power-up diagnostics, functioning

properly

OFF

Power is not applied, or CPU has a problem,

which may be indicated by RN and EN blink

pattern

Green, blinking

CPU in Stop-Halt state; possible watchdog

timer fault. Refer to the fault tables. If the

programmer cannot connect, cycle power

with a charged Energy Pack attached and refer

to fault tables

RN—indicatesthe run state of the CPU.

Green, ON

steady

CPU is in Run mode.

OFF

CPU is in Stop mode.

8 PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B

Green,

blinking in

unison with

CPU is in boot mode and is waiting

for a firmware update through a

serial port.

EN—indicates outputs enabled.

Green, ON

steady

Output scan is enabled.

OFF

Output scan is disabled.

CM —indicates activity on the serial communications port.

Green, blinking

Signal activity on the COM1 port.

OFF

No activity on COM1 port.

IO FORCE —indicates overrideon abit reference.

Amber, ON

steady

Override active on at least one-bit reference.

OFF

No overrides applied.

STATUS —indicates Energy Pack status.

OFF

Energy Pack not connected.

Green, blinking

Energy Pack charging; not yet charged

above the

minimumoperatingvoltage.

Red, ON

Energy Pack circuit fault.

9 PACSystems™ RX3i Central Processing Unit IC695CPE305 GFK-2934B

Red, blinking

Energy Pack near its endof life and should

replaced soon.

Green, ON

steady

Energy Pack is chargedabove its

minimumoperating voltage.

SYS FLT —indicates presence of afatal fault.

OFF

No fatal faults.

Red, ON

CPU is in Stop/Faulted mode because a

fatal fault

has occurred.

RDSD —indicates signal activity on the RDSD/COM2/USB port.

Green, blinking

COM2 port activity

OFF

No COM2 port activity

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Computerhardware Handbücher

Emerson

Emerson PACSystems RX3i Bedienungsanleitung

Emerson

Emerson XEV22D Bedienungsanleitung

Emerson

Emerson Liebert Intellislot Unity Card Bedienungsanleitung

Emerson

Emerson MultiFlex CUB-II Bedienungsanleitung

Emerson

Emerson PACSystems IC695CPE400 Bedienungsanleitung

Emerson

Emerson PACSystems IC695CPE400 Bedienungsanleitung

Emerson

Emerson PACSystems RX3i Bedienungsanleitung

Emerson

Emerson Liebert IntelliSlot Bedienungsanleitung

Emerson

Emerson QuickPanel+ IC755C S06RD Series Bedienungsanleitung

Emerson

Emerson FB2200 Stücklistenhandbuch

Emerson

Emerson Fisher FIELDVUE DLC3020f Bedienungsanleitung

Emerson

Emerson IC695CPE330 Bedienungsanleitung

Emerson

Emerson Bristol ControlWave Express Bedienungsanleitung

Emerson

Emerson Liebert IntelliSlot OC-485 Bedienungsanleitung

Emerson

Emerson Dixell iChill ICX207D Bedienungsanleitung

Emerson

Emerson Liebert CRV Bedienungsanleitung

Emerson

Emerson PACSystems IC695CPL410 Bedienungsanleitung

Emerson

Emerson SI-PROFINET RT 0478-0125-02 Bedienungsanleitung

Emerson

Emerson PCIE-8120 Bedienungsanleitung

Emerson

Emerson PACSystems RX3i IC695CPE302-B Series Bedienungsanleitung

Emerson

Emerson Bristol 392951-01-0 Bedienungsanleitung

Emerson

Emerson Liebert ISWEBRT3 Bedienungsanleitung

Emerson

Emerson Pm8560 Bedienungsanleitung

Emerson

Emerson Liebert iCOM Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung