Emerson PACSystems RX3i IC695ECM850 Bedienungsanleitung

QUICK START GUIDE

GFK-2851A

Sep 2019

PACSystemsTM RX3i

IEC-61850 ETHERNETCOMMUNICATIONMODULE

(IC695ECM850)

Quick Start Guide Chapter 1 
GFK-2851A Sep 2019 
 
Contents 1 
Contents 
User Features ...........................................................................4 
1. Overview .............................................................................................4 
2. Ethernet Ports .....................................................................................5 
3. Micro USB Port ....................................................................................7 
4. Restart Pushbutton .............................................................................8 
5. Light-Emitting Diode Indicators (LEDs)................................................8 
Hardware Installation.............................................................13 
1. Initial Checks .....................................................................................13 
2. Installation Location..........................................................................14 
3. Installation in Hazardous Areas .........................................................14 
4. Module Installation............................................................................16 
5. Ethernet Port Connections to IEC 61850 LAN ....................................19 
Configuration.........................................................................23 
1. Confirm ECM850 Communication with the CPU ...............................23 
2. Next Steps .........................................................................................24 
Status and Diagnostic Data.....................................................27 
1. Module Status Data (32 bits).............................................................27 
2. Problems during Powerup and Reset.................................................28 
Additional Information...........................................................30 
1. PACSystems RX3i User Manuals ........................................................30 
2. Information about IEC 61850 ............................................................30 

Quick Start Guide Chapter 1

GFK-2851A Sep 2019

User Features 2

Caution, Warnings & Danger Notes as Used in this Publication

Warning

Warning Notices are used in this publication to emphasize

that hazardous voltages, currents, temperatures, or other

conditions that could cause personal injury exist in this

equipment or may be associated with its use.

In situations where inattention could cause either personal

injury or damage to equipment, a Warning notice is used.

arning

Caution

Caution notices are used where equipment might be

damaged if care is not taken.

arning

Note: Notes merely call attention to information that is

especially significant to understanding and operating

the equipment.

These instructions do not purport to cover all details or variations

in equipment, nor to provide for every possible contingency to be

met during installation, operation, and maintenance. The

information is supplied for informational purposes only, and

Quick Start Guide Chapter 1

GFK-2851A Sep 2019

User Features 3

Emerson makes no warranty as to the accuracy of the

information included herein. Changes, modifications, and/or

improvements to equipment and specifications are made

periodically and these changes may or may not be reflected

herein. It is understood that Emerson may make changes,

modifications, or improvements to the equipment referenced

herein or to the document itself at any time. This document is

intended for trained personnel familiar with the Emerson

products referenced herein.

Emerson may have patents or pending patent applications

covering subject matter in this document. The furnishing of this

document does not provide any license whatsoever to any of

these patents.

Emerson provides the following document and the information

included therein as-is and without warranty of any kind,

expressed or implied, including but not limited to any implied

statutory warranty of merchantability or fitness for particular

purpose.

Quick Start Guide Chapter 1

GFK-2851A Sep 2019

User Features 4

1. User Features

1.1. Overview

The PACSystems RX3i IEC

61850 Ethernet

Communication Module,

catalog number

IC695ECM850, or

ECM850, connects a

PACSystems RX3i

controller to an IEC

61850 network, enabling

the controller to act as an

IEC 61850 Client and

communicate with

Intelligent Electronic

Devices (IEDs, IEC 61850

Servers) on the network

using the IEC 61850 protocol.

ECM850

ACTIVE

USB

LAN

STATUS

CONN

USB

IP ADDRESS

MAC ADDRESS

PORTS

TO INSTALL,

TORQUE TO

6 IN-LB.

FRONT

3 4

1 2

SD CARD

USB port,

Micro Type B

IEC 61850 Port

Activity

Indicator LEDs:

1-4

USB Port Activity

Indicator LEDs:

ACTIVE, USB

Module Status

Indicator LEDs:

OK, LAN,

STATUS,

CONN

SD Card Slot

Reset

pushbutton

IP and MAC

address labels

IEC 61850

Ethernet Ports

(underside)

Bottom bracket

Heatsink screw

Figure 1.1: Module Overview

Quick Start Guide Chapter 1

GFK-2851A Sep 2019

User Features 5

1.2. Ethernet Ports

The ECM850 connects to one IEC 61850 network by means of one

or more of its four external Ethernet ports. Two 8-conductor RJ-

45 shielded twisted pair 10/100/1000 Mbps copper interfaces

and two Small Form-factor Pluggable (SFP) cages provide

flexibility in media selection.

Figure 1.2: Ethernet Ports

The module is assigned five Ethernet MAC addresses: one for

each of the four external Ethernet ports and one for the internal

switch.

Quick Start Guide Chapter 1

GFK-2851A Sep 2019

User Features 6

SFP Modules

Each SFP cage on the bottom of an ECM850 is capable of

accepting the SFP devices listed below. SFP devices can be

removed and replaced during module operation.

SFP

Type

Wave

length

(nm)

Medi

Type

Core

Size

(μm)

Modal

Bandwidth

(MHz –

Km)

Distance

(m)

100BASE

-FX1

1300

MMF

62.5

500

2 –2,000

(Full-

Duplex)

2 –400

(Half-

Duplex)

400

500

100BASE

-LX10

1300

SMF

2 –10,000

1000BAS

E-SX

850

MMF

62.5

160

2 –220

200

2 –275

400

2 –500

500

2 –550

1000BAS

E-LX

1300

SMF

2 –10,000

Quick Start Guide Chapter 1

GFK-2851A Sep 2019

User Features 7

SFP

Type

Wave

length

(nm)

Medi

Type

Core

Size

(μm)

Modal

Bandwidth

(MHz –

Km)

Distance

(m)

1000BAS

E-ZX

1550

SMF

2 –70,000

10/100/

1000

BASE-T2

CAT5/

CAT5e

/ CAT6

100 (max)

1Emerson part number IC695SPF002

2Emerson part number IC695SPC100

1.3. Micro USB Port

The ECM850 has a USB Micro-B socket for connection to a

computer. It can be used to access the ECM850’s Command Line

Interface function following the installation of special drivers. This

port is intended for advanced maintenance and is not required for

normal use. See the User Manual referenced in Section 5 for

details.

Quick Start Guide Chapter 1

GFK-2851A Sep 2019

User Features 8

1.4. Restart Pushbutton

The Restart pushbutton can be used to manually restart the

module without cycling power. The restart operation begins

when the pushbutton is released.

1.5. Light-Emitting Diode Indicators (LEDs)

OK —indicates whether the module is able to perform normal

operations.

Green, ON

steady

Green, blink

pattern

Fatal error. Flashes once between

error codes blinked on the STATUS

LED.

OFF

Not OK

LAN —indicates access to and activity on the Ethernet local area

network (LAN). The LAN LED indicates network packets are being

processed by the network interface (not just passing through the

embedded switch).

Blinking ON

The module’s network interface is

active

Quick Start Guide Chapter 1

GFK-2851A Sep 2019

User Features 9

Blink pattern

Fatal error. Flashes once between

error codes blinked on the STATUS

LED

OFF

No network activity

STATUS —indicates the condition of the ECM850 during normal

operation. It is reset when the local log is cleared. For more

information see the Command Line Interface clear log command.

Green, ON

No new local log table entries

OFF

New local log table entry

Green, blink

pattern

Fatal error. Error codes are blinked

on this LED. See Chapter 5 of the

User Manual for details.

Red, blinking

Invalid MAC address (all MAC

addresses are validated; error

indicates if any address is bad)

Inhaltsverzeichnis

Andere Emerson Steuereinheit Handbücher

Emerson

Emerson Fisherr D2 FloPro Bedienungsanleitung

Emerson

Emerson HF Bedienungsanleitung

Emerson

Emerson ASCO 353 Series Bedienungsanleitung

Emerson

Emerson Alco Controls 110RB Bedienungsanleitung

Emerson

Emerson Fisher SS-264 Bedienungsanleitung

Emerson

Emerson KEYSTONE FIGURE 955 Bedienungsanleitung

Emerson

Emerson 289 Series Bedienungsanleitung

Emerson

Emerson Crosby J Series Bedienungsanleitung

Emerson

Emerson ANDERSON GREENWOOD PILOT 9300 Series Bedienungsanleitung

Emerson

Emerson PACSystems VersaMax IC200BEM002 Bedienungsanleitung

Emerson

Emerson Baumann 24000 Little Scotty Bedienungsanleitung

Emerson

Emerson numatics E22 Bedienungsanleitung

Emerson

Emerson NEOTECHA NEOSEAL Bedienungsanleitung

Emerson

Emerson 581 Series Montageanleitung

Emerson

Emerson FISHER NotchFlo DST Bedienungsanleitung

Emerson

Emerson Fisher 377 Bedienungsanleitung

Emerson

Emerson Anderson Greenwood 727 Series Bedienungsanleitung

Emerson

Emerson Alco Controls TCLE Bedienungsanleitung

Emerson

Emerson BVE Series Bedienungsanleitung

Emerson

Emerson Kunkle Series Kurzanleitung

Emerson

Emerson Fisher Vee-Ball V200 Bedienungsanleitung

Emerson

Emerson Fisher V500 Bedienungsanleitung

Emerson

Emerson Keystone K-LOK 360 Series Leitfaden

Emerson

Emerson Fisher V150E Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung