Emerson Copeland EVH Series Bedienungsanleitung

This guide is a supplement to the application manual supplied with the drive.

Improper wiring can cause bodily harm and damage the equipment. Follow

good wiring practices and all applicable codes and standards.

MODEL NAMEPLATE

• Verify you received the correct model drive.

• Compare the drive nameplate VOLTS and AMPS

rating with the motor or compressor nameplate.

• Check that the power source meets the input

power requirements.

• Output power from the drive should match the

motor requirement.

KEYPAD AND DISPLAY

• Use and arrows to navigate a menu

list and change parameter values.

• Use arrow to enter parameter group

mode and arrow to back up one step.

AC POWER WIRING

• Locate the power terminal strip.

• Check the AC voltage rating shown

on the drive nameplate with the AC

incoming voltage.

• Turn the power off and make

connections.

I/O WIRING

Refer to the EVH Install Manual for

the complete I/O wiring guide.

Copeland™Commercial HVACR

Variable Frequency Drive – EVH Series

QUICK START GUIDE

Climate.Emerson.com

2020ECT-47 R1 (3/21) Emerson and Copeland are trademarks of Emerson Electric Co. or one of its afﬁliated companies.

START UP WIZARD PARAMETERS

The following table lists the standard parameters in the

Startup Wizard that happen when the drive is energized.

Refer to the application manual for parameter descriptions.

Item Par. Name Description

1Startup Wizard

Enable Press ok

2Application 0=Basic; 1=PID; 2=Advanced

3Language 0= English; 2= Deutsch

4Real Time Clock yy.mm.dd

hh:mm:ss

5Daylight Saving 0= Off; 1= EU; 2= US

6Min Frequency Min: 0.00 Hz

Max: Max Freq

7Max Frequency Min: Min Frequency

Max: 400.00 Hz

8Motor Nom Current Min: 0.1A Max: 500 A

9Current Limit Min: Ih*1/10 Max: Ih*2

10 Motor Nom Speed Min: Ih*1/10 Max: Ih*2

11 Motor PF Min: 0.30 Max: 1.0

12 Motor Nom Voltage Min: 180V Max: 690V

13 Motor

Nom Frequency Min: 30.00 Hz Max: 400.00 Hz

14 Accel Time Min: 0.1 sec Max: 3000 sec

15 Decel Time Min: 0.1 sec Max: 3000.0 sec

16 Hand Control Place 0= Keypad; 1= I/O Terminal Start 1;

2= I/O Terminal Start 2; 3= Fieldbus

17 Hand Reference

0= AI1; 1= AI2; 2= Slot A: AI1;

3= Slot B: AI1; 4= AI1 Joystick; 5= AI2

Joystick; 6= Keypad; 7= Fieldbus;

9= Max Frequency; 10 = AI1 + AI2;

11 = AI1 –AI2; 12 = AI2 –AI1;

13 = AI1 * AI2; 14 = AI1 or AI2;

15 = Min(AI1,AI2); 16 = Max(AI1,AI2);

17 = PID1 Control Output;

18 = PID2 Control Output

18 Auto 1 Control Place 0= I/O Terminal Start 1; 1= Fieldbus;

2= I/O Terminal Start 2; 3= Keypad

19 Auto 1

Control Reference

0= AI1; 1= AI2; 2 = Slot A: AI1;

3= Slot B: AI1; 4= AI1 Joystick; 5= AI2

Joystick; 6= Keypad; 7= Fieldbus;

9= Max Frequency; 10 = AI1 + AI2;

11 = AI1 –AI2; 12 = AI2 –AI1;

13 = AI1 * AI2; 14 = AI1 or AI2;

15 = Min(AI1,AI2); 16 = Max(AI1,AI2);

17 = PID1 Control Output;

18 = PID2 Control Output

20 Bypass Enabled 0= Disabled; 1= Enabled

FREQUENTLY ASKED QUESTIONS

Q: How do I reset the drive back to factory default settings?

A: Hold the OFF/STOP and BACK/RESET buttons for 5 seconds

to return drive to factory default.

Q: How do I adjust the time it takes the motor to speed up

or slow down?

A: To adjust the time for the motor to accelerate to set speed,

ﬁnd parameter P1.3 (accel time). To adjust the time for the

motor to decelerate to 0, ﬁnd parameter P1.4 (decel time).

Q: How do I prevent the drive from tripping on an

overvoltage fault while my motor is ramping down?

A: Make the deceleration time longer for your ramp down,

check input voltage, or activate overvoltage controller in

parameter P5.1.12.

Q: Can I run my motor above the nominal motor speed?

A: The motor should be run within the speed range speciﬁed

by the manufacturer. For Copeland™compressors, please see

AE-1466 for allowed speed ranges.

Scan for more information or visit

Climate.Emerson.com/CopelandVariableFrequencyDrives

Andere Emerson Gleichstromantrieb Handbücher

Emerson

Emerson unidrive sp Bedienungsanleitung

Emerson

Emerson Control Techniques Epsilon Ei Bedienungsanleitung

Emerson

Emerson Unidrive M200-01100017 Bedienungsanleitung

Emerson

Emerson E Series Bedienungsanleitung

Emerson

Emerson unidrive sp Bedienungsanleitung

Emerson

Emerson Control Techniques Focus 3N Bedienungsanleitung

Emerson

Emerson Powerdrive F300 Bedienungsanleitung

Emerson

Emerson Mentor MP Montageanleitung

Emerson

Emerson Unidrive M700 Bedienungsanleitung

Emerson

Emerson Bettis RTS Bedienungsanleitung

Emerson

Emerson PACMotion VFD Series Bedienungsanleitung

Emerson

Emerson Mentor MP Beilage

Emerson

Emerson COPELAND EVA3 Handbuch

Emerson

Emerson Unidrive M700 Montage- und Bedienungsanleitung

Emerson

Emerson Control Techniques EN Series Bedienungsanleitung

Emerson

Emerson EV3150B Bedienungsanleitung

Emerson

Emerson MP25A4 Bedienungsanleitung

Emerson

Emerson EV3 Series Bedienungsanleitung

Emerson

Emerson EVH Series Bedienungsanleitung

Emerson

Emerson Dixell XRi77CX Verdrahtungsschema

Emerson

Emerson Control Techniques Epsilon Eb Series Bedienungsanleitung

Emerson

Emerson Quantum MP Bedienungsanleitung

Emerson

Emerson Dixell XEV23D Verdrahtungsschema

Emerson

Emerson Mentor MP Montageanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung