
010
Rear Panel & Functions
Rear Panel & Functions
4. USB Type A interface for connection to USB sticks (FAT32 or NTFS formatted)
Connect USB sticks with audio les to the EMM Labs NS1 for playback using the
mConnect Control app for Android and IOS or the mConnect HD app for
tablets. File playback supports up to 24bit, 192kHz and accepts the following les
AAC, AIFF, ALAC, FLAC, MP3, WAV, WMA, MQA® and DSD64 (via DoP) in DSF
or DFF le format.
5. Ethernet network interface (RJ45) connector.
Networking connection for both streaming media, rmware updates and remote
control using mConnect Control or HD app. Stream les up to 24bit, 192kHz and
DSD64 (via DoP). It also supports MQA®, is UPnP/DLNA compatible and is a Roon
Ready endpoint.
6. Auxiliary USB Type A
WiFi adaptor port (optional, WiFi adaptor not included)
7. RS232 communication port.
Remote and data communication between EMM products.
8. AP Factory Reset button (for support purposes only).
9. WiFi WPS setup button.
10. At the bottom of the NS1 is the model, serial number, and voltage indicator.
Tampering or removal of this lable will void factory warranty.
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
NS1 STREAMER QUICKSTART & OWNERS MANUAL