EMP-Centauri T1/1+1ENP8dB-1 Bedienungsanleitung

Instruction Manual

T1/1+1ENP8dB-1

T1/1+1ENP12dB-1

T1/1+1ENP16dB-1

T1/1+1ENP20dB-1

Dear Customer,

congratulations on the purchase of the EMP-Centauri product. Before its

installation and putting into operation, read carefully the entire operation manual.

Keep the purchase and rework if any) records for future need.

1) Field of Application, Warranty

The product is designed for the distribution of terrestrial including cable) TV and

radio signals.

The manufacturer provides for E.LITE CLASS products extended 4 four) years

warranty from the date of purchase, see details in EMP-Centauri’s General trade

conditions, published at manufacturer’s website www.emp-centauri.cz.

It is prohibited to dismantle the product and make any interventions in it. Repairs

or any interventions in the product may be performed only by EMP-Centauri

company, or other companies authorized by EMP-Centauri.

2) Technical Specifications

The product is wideband passive tap that can be used for distributing signals in

terrestrial and/or satellite frequency bands. Level balancing of whole system can

be achieved by using different tap loss versions. We therefore offer this product

with tap loss stepped from 9 to 20 dB part types T1/1+1ENP8dB-1,

T1/1+1ENP12dB-1, T1/1+1ENP16dB-1, T1/1+1ENP20dB-1).

Trunk path transmits DC voltage, 22 kHz and DiSEqC commands. Terrestrial port

is DC isolated.

Specification for T1/1+1ENP… … dB-1 …12dB-1 …16dB-1 …20dB-1

Inputs / Outputs 1 / 2 trunk + tap)

Frequency Range 5–2150 MHz

Tap loss max) 9 dB 12 dB 16 dB 20 dB

Trunk loss max) 2.5 dB

Dimensions w,d,h) 5.4 x 6.0 x 3.2 cm

Temperature Range −25 °C – +60 °C

1 of 4

3) Product Takeover

Make sure that the product is not damaged. In the case of damage please contact

your dealer.

4) Product Storing and Installation

We recommend the device to be installed and serviced by the qualified

technician.

The product must not be stored and installed:

•in the place with excessive humidity

•in the place with dropping or splashing water,

•in the place with excessive dust pollution, mechanical vibrations or

impacts

•in the place out of temperature limits specified in the section 2)

Technical Specifications

•close to heat sources radiators or air ventilators, direct sunshine etc.)

•in the reach of children

Use the apparatus only in moderate climates not in tropical climate).

Fix the product firmly on a wall or another hard and inflammable surface with

screws and dowels. The product shall be in no case held only by the connected

cables.

Further instructions:

•ensure the free space at least 10 cm around the product for the

sufficient air circulation

•do not cover the product with curtains etc.)

•do not place any containers with liquids vases, glasses etc.) or naked

flame sources lighted candle etc.) on the product or near the product

2 of 4

5) Product Connection

Connect the product in accordance with this manual and valid regulation in you

country. Use high quality 75 Ω coaxial cable designed for satellite reception. The

coaxial cables shall not be broken, the minimum bending radius should be 5 cm.

Mount the F connectors screw, crimp or compress type) on the ends of coaxial

cables. Connect the F connectors into the F sockets of product and fasten them

with an appropriate force.

•Connect F-socket “TRUNK1+DC” to preceding device in cascade /

distribution system

•Connect F-socket “TRUNK2+DC” to following device in cascade /

distribution system

•Connect F-socket “TAP DC blocked)” to next wide-band device /

receiver

6) Product Settings

The product has no adjustable options.

7) Safety

Due to security reasons the product and wiring in which the product is connected,

must be grounded properly. Make sure the antennas are grounded properly.

Connect all devices to power grid only after all connections are finished and

checked. If you have to enter places with a risk of fall, pay attention to your safety.

Never work on the wiring including terrestrial receivers, TVs) during or before a

storm. A lightning stroke into the antenna may cause dangerous overvoltage in the

product metallic parts.

The product should be disconnected from the wiring immediately if it gets into

contact with liquids dropping water, spilled drinks etc.).

) Product Maintenance

The maintenance operation is especially cleansing of the product. Use only dry

cloth to clean the product and do not use any liquid agents.

Coaxial cables installed outdoors should be replaced once in a few years.

Unscrew all F connectors and clean connector contacts, resp. shorten the coaxial

cable by approx. 2 cm, every 2 years.

3 of 4

10) Contact

Manufacturer: EMP-Centauri s.r.o.

5. kvetna 690

339 01 Klatovy 4

Czech Republic

tel: +420) 376 323 813 sales)

tel: +420) 376 323 853 tech. support)

[email protected]

www.emp-centauri.cz

9) Symbols Explanation

Certificate of conformity

According to EU directive, electric and electronic devices which are

identified by one of the following symbols must not be disposed of

together with municipal waste. When disposing of the old device, use

local waste collection and separation systems.

4 of 4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EMP-Centauri Schalten Handbücher

EMP-Centauri

EMP-Centauri P.169-TW Bedienungsanleitung

EMP-Centauri

EMP-Centauri S16/4PCN-W3 Bedienungsanleitung

EMP-Centauri

EMP-Centauri S2/1PCNpos-W1 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS9/9+6ECU-4 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS5/16NEU-12 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS5/5+2PIP-4 Bedienungsanleitung

EMP-Centauri

EMP-Centauri S4/1PCT-W2 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS5/4PLP-3 Bedienungsanleitung

EMP-Centauri

EMP-Centauri S?16/1?PCP-W3 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS17/17+6ECU-4 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS5/32EEU-14 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS5/6NEU-4 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS9/4EIP-8 Bedienungsanleitung

EMP-Centauri

EMP-Centauri P.162-IW Bedienungsanleitung

EMP-Centauri

EMP-Centauri P.162-IW Bedienungsanleitung

EMP-Centauri

EMP-Centauri OMS5/10 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS13/13+6ECP-4 Bedienungsanleitung

EMP-Centauri

EMP-Centauri S2/1PCN-W1 Bedienungsanleitung

EMP-Centauri

EMP-Centauri S16/1PCP-W3 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS5/12ELP-4 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS13/13+32EEU-14 Bedienungsanleitung

EMP-Centauri

EMP-Centauri MS5/5+12ECP5dB-4 Bedienungsanleitung

EMP-Centauri

EMP-Centauri P.144-A-5 Bedienungsanleitung

EMP-Centauri

EMP-Centauri OMS5/4 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung