Enclume 150310 Bedienungsanleitung

Sling Rack with Newspaper Holder

7he ultimate in Quality, design, strength and function.

C Congratulations for owning one of the finest

Storage racks made.

WARNING:

READ ALL OF THE INSTRUCTIONS

BEFORE ASSEMBLING AND USING

YOUR RACK.

Enclosed you will find everything needed for the assembly

and use of your hearth rack. Two people make assembly easier.

Components Included:

2- Rectangular pieces with pre-assembled kindling slings and newspaper holders

4- 3/8” x 5/8” button head screws

2- Legs

4- Hard glides

1-7/32” allen wrench LQFOXGHG

ASSEMBLY INSTRUCTIONS

1) Slip the floor glides over the ends of the legs.

2) Position the two rectangular body pieces over the legs so the base forms a square. Attach the pieces

together with the 3/8” x 5/8” button head screws. They should be inserted from the interior of the rack

toward the floor. Tighten all the screws only finger tight.

3) Square up the rack and tighten.

4) Use the kindling holder for kindling only. DO NOT stack logs in the kindling holder.

5) To clean your rack, use a damp cloth and dry it thoroughly. If a touch-up is ever necessary, remove any

dirt or rust with steel wool and re-coat with a “pledge” like wax product.

It is important that your rack is assembled correctly. If the unit is assembled or used

incorrectly, it could become unstable and collapse, possibly causing injury.

If you need help, please call 1-877-ENCLUME

Enclume Design Products, Inc.

24 Colwell Street, Port Hadlock, WA. 98339

Phone 360-385-6100 •Fax 360-385-6156

www.enclume.com

WARNING

Note: Drawing is for illustration purposes only. Actual product may vary slightly

If you need help, please call 1-877-ENCLUME

Enclume Design Products, Inc.

24 Colwell Street, Port Hadlock, WA. 98339

Phone 360-385-6100 •Fax 360-385-6156

www.enclume.com

Limited Warranty:This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall

be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the

warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid

within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the