Harmony SBX Remote I/O Network Monitoring & Control User Manual
© 2020 ENCOM Wireless Data Solutions. All Rights Reserved
INTRODUCTION
THE HARMONY SYSTEM
The HARMONY line of devices enables you to monitor and
control field equipment from the comfort of your network
operations center.
Just install a HARMONY I/O device at a remote site for
immediate access to your equipment’s status, and easy
control of your equipment using STRATOS Elite, our
complete network visualization management system.
Reduce your operating costs by eliminating time consuming
and repetitive site visits. Everything you need to know about
a site is now available at your fingertips.
HARMONY devices can be used for applications such as:
§ School zone flasher control and monitoring
§ Solar power system monitoring
§ Traffic cabinet monitoring
§ Signage control
§ Gate control
§ Irrigation control and monitoring
§ Water/wastewater control and monitoring
§ Streetlight monitoring
§ SCADA applications
§ Any other application where remote equipment
needs to be monitored and controlled
HARMONY SYSTEM BUILDING
BLOCKS
Each system needs to include at least one Harmony
‘Gateway’ device (Gateway Basic, Gateway Advanced I/O,
Gateway E-Lite 450 or IP I/O8) functioning as a hub in the
system. This gateway device routes all communication
between your IP network and all Harmony devices through
the robust 900MHz Frequency Hopping Spread Spectrum
(FHSS) wireless system.
The Harmony SBX Remote I/O is one of the Harmony Line
of radios featuring capabilities essential for providing
ample information in a wireless communication system.
The device features both analog and digital I/O, allowing
you to monitor and control a wide range of peripherals
remotely and wirelessly.
All Harmony devices are fully compatible with our STRATOS
Elite Central Management Software. You can use STRATOS
Elite to configure, manage and monitor any Harmony
device.
Use STRATOS Elite Central Management Software to:
§ Get a quick overview of your field devices using a
friendly map display
§ View the real-time status of your field equipment
§ Get e-mail alerts for important events and alarms
§ Log equipment status information for later review
§ Schedule periodic on/off events using a powerful
Schedule Editor
Some of the userful turnkey solutions possible with
Harmony products include;
§ Monitoring, control and reporting capability for solar
or AC powered School zone flashing beacons
§ Attaching various analog or digital sensors that
monitor specific events such as flood, ice or
temperature control
