Endeavour Tools ET8626 Bedienungsanleitung

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

1 Product Summary

1.1 Product Profile

ET8626 Battery Tester adopts currently the world's most advanced conductance testing technology to easily, quickly and accurately measure

the actual cold cranking amps capability of the vehicle starting battery, healthy state of the battery itself, and common fault of the vehicle

starting system and charging system, which can help maintenance personnel to find the problem quickly and accurately, thus to achieve

quick vehicle repair.

1. Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel

battery, EFB battery, etc.

2. Directly detect bad cell battery.

3. Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery.

4. Directly test the battery with loss of electricity, no need to full charge before testing.

5. Testing standards include currently the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.

6. Support multi-languages, customer can select different language package, which includes: Chinese Simple, Chinese Traditional, English,

Japanese, Russian, Spanish, French, Italian, German, etc. Other languages can also be customized according to user's need.

1.2 Product Function

Main functions of ET8626 battery tester include: battery test, cranking test, charging test and other additional functions.

Battery test is mainly targeted to analyze the battery healthy status to calculate the actual cold cranking capability of the battery and the

aging extent, which provide reliable analysis evidence for the test and maintenance of the battery. It notifies the user to replace battery in

advance when the battery getting aged.

Cranking test is mainly to test and analyze the starting motor. Through testing the actual required cranking current and cranking voltage of

the starting motor, it can find out whether the starting motor works fine. There are several reasons why the starting motor is abnormal:

lubricating system fault causing the starting loaded torque increasing or rotor friction of the starting motor causing the increasing friction of

the starting motor itself.

Charging test is to check and analyze the charging system, including generator, rectifier, rectifier diode, etc., thus to find out whether the

output voltage of the generator is normal, the rectifier diode works fine and the charging current is normal. Suppose one of the above

mentioned parts is not in normal situation, it will lead to over charge or incomplete charge of the battery, thus the battery will be quickly

damaged and also greatly shorten the using life of other loaded electrical appliance.

Additional functions include: Set language, voltmeter and screen brightness adjustment.

1.3 Technical Parameters

1. Cold Cranking Amps Measure Range:

Measure Standard Measure Range

CCA 100-2000

BCI 100-2000

CA 100-2000

MCA 100-2000

JIS 26A17--245H52

DIN 100-1400

IEC 100-1400

EN 100-2000

SAE 100-2000

GB 100-1400

2. Voltage Measure Range: 8-30V DC

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

1.4 Working Environment Requirement

Working Environment Temp.: -20°C-60°C

It is applicable for automotive manufacturers, automotive maintenance and repair workshops, automotive battery factories, automotive

battery distributors, and educational organizations, etc.

2 PRODUCT INFORMATION

2.1 Tool Description

5 6

7 8

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

1. LCD Display-- Indicates test results. Backlit, 128 x 64 pixel display with contrast adjustment.

2. OK key-- Confirms a selection (or action) from a menu.

3. Exit key-- Cancels a selection (or action) from a menu or returns to the menu.

4. Up key-- Moves up through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves up

through the current screen to the previous screens for additional data.

5．Down key-- Moves down through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves

down through the current screen to next screens for additional data.

6 Menu key-- Press it to enter the main menu

7. Printer-- Choose the function of PRINT DATA and confirm it, then print the testing result.

8. Battery Clips-- Connect to the Positive and negative electrodes of auto battery.

9. Mini-USB Socket (in the side of the product)-- Connect to computer for print via USB cable.

2.2 Product Specifications

1). Display: large, 128*64 easy to read LCD, backlit

2). Operating Temperature: 0 to 50°C (-32 to 122 F°)

3). Storage Temperature: -20 to 70°C (-4 to 158 F°)

4). Power—provided via detachable heavy duty OBD II cable

5). Dimensions:

Length Width Height

210 mm ( 8.3") 90 mm ( 3.54"”) 40mm (1.57"”)

6). Weight: 700g

2.3 Accessories Included

1) User Manual -- Instructions on tool operations

2) USB cable -- Provides link to tool and computer for print..

3). CD--- Print software inside.

2.4 Product Setup

The tool allows you to make the following adjustments and settings:

1) Language: Selects desired language.

2) Contrast adjustment: Adjusts the contrast of the LCD display.

3) Tool information: The tool show the version and produced date.

To enter the Tool Setup menu

From the second startup screen, press Exit button to enter Main menu. Press

Down button to select the Tool Setup function.

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

Language:

1) From Tool Setup menu, use Enter button to select Language

2) Use UP and DOWN button to select the desired language and press ENTER button to save your selection and return to previous menu.

Contrast

1) From Tool Setup menu, use Enter button to select contrast.

2) Use UP and DOWN button to select the contrast value and press ENTER button to save your selection and return to previous menu.

Tool Information

From Tool Setup menu, use Enter button to select Tool Information

Press exit to return the previous menu.

3 Battery Test

After entering battery test program, tester displays the tester model and version

Tester will display the following contents in a sequence, select accordingly.

3.1Quick test

38%

Contrast

English

French

German

Spanish

Language

Software Version:

1.00

Hardware Version:

1.00

Tool Information

Language

Contrast

Tool Information

System Setup

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

It can make sure the battery status, including voltage, CCA, electronic resistance, rated CCA, charging value, healthy value and testing result

in one second. Once input the AH value—battery rated capacity, which is marked in the label of the battery.

1). Press UP/DOWN key to select the Quick test, then press ENTER key to confirm.

2). Input the rated battery capacity—xx AH, in general, the battery capacity for 12V vehicle is above 30AH.

3). Then press enter key, the testing result will show one of these, as below

. Battery test result includes 5 types as following:

1) Good Battery

The battery is without any problem, please be relaxed to use!

2) Good, Recharge

Good battery but low current, recharge before using.

3) Replace

The battery is near to or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed.

Healthy:96%490CCA

Charge:98% 12.64V

Internal R=6.1mΩ

Rated: 500A

GOOD BATTERY

Healthy:78% 440CCA

Charge:30%12.20V

Internal R=7.2mΩ

Rated: 500A

GOOD, RECHARGE

Healthy:46% 490CCA

Charge:80%12.68V

Internal R=18.1mΩ

Rated: 500A

REPLACE

1.Quick Test

2.Battery in Vehicle

3.Out of Vehicle

4.Review Data

5. Print Data

6.System Setup

Main Menu

50 A-H

Please input the A-HR value in the

Label of the battery.

Input AH value

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

4) Bad Cell, Replace

Battery interior damaged, bad cell or short circuit, replace battery.

5) Charge, Retest

Unstable battery shall be recharged and retested to avoid error. If same test result appears after recharge and retest, the battery is regarded

as damaged, replace the battery.

Battery In-Vehicle or Battery Out-Of-Vehicle

Press UP/DOWN key to select the battery location, in vehicle or out of vehicle, then press ENTER key to confirm.

Battery in vehicle means battery is connected with vehicle generator or vehicle electrical appliance.

3.2 Battery in vehicle

Choose the battery in vehicle and press Enter key, then it will enter the below menu.

3.2.1 Batter test in vehicle

When surface charge detected by the tester, it prompts "SURFACE CHARGE, TURN LIGHTS ON"

Turn lights on as prompted to eliminate battery surface charge, tester will then display the following messages in a sequence:

Healthy:0% 0CCA

Charge:20%10.64V

Internal R=45.2mΩ

Rated: 500A

BAD CELL

，

REPLACE

Healthy:39% 310CCA

Charge:20%12.08V

Internal R=30.1mΩ

Rated: 500A

CHARGE-RETEST

1.Quick Test

2.Battery in Vehicle

3.Out of Vehicle

4.Review Data

5. Print Data

6.System Setup

Main Menu

1.Battery Test

2.Cranking Test

3.Charging Test

Test in Vehicle

1.Check surface charge, Turn lights on.

2. Take headlights on about 10 seconds.

3.Turn lights off.

Battery Test

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

Now the tester detects the surface charge has been eliminated, turn lights off as prompted, then press ENTER key. The tester will recover

automatic test

OUT-OF-VEHICLE means battery is not connected with any of the vehicle loaded, i.e. battery connection is cut off.

Select Battery Type

After the battery charge status selected, tester will prompt to select battery type, i.e. Regular Flooded, AGM Flat Plate or

AGM Spiral, Gel and EFB battery. Press UP/DOWN key to select battery type, then press OK key to confirm

Battery System Standard and Rating

ET8626 battery tester will test each battery according to the selected system and rating.

Use UP/DOWN key to select according to the actual system standard and rating marked on the battery. Use UP/DOWN key to select

according to the actual system standard and rating marked on the battery. See in the below picture, the arrow indicated location.

CCA: Cold Cranking Amps, specified by SAE&BCI, most frequently used value for starting battery at 0°F (-18°C).

BCI: Battery Council International standard

CA：Cranking Amps standard, effective starting current value at 0°C

MCA: Marine Cranking Amps standard, effective starting current value at 0°C.

JIS：Japan Industrial Standard, displayed on the battery as combination of the numbers and letters, e.g. 55D23,80D26.

DIN：German Auto Industry Committee Standard

IEC：Internal Electro technical Commission Standard

EN：European Automobile Industry Association Standard

SAE: Society of Automotive Engineers Standard

GB：China National Standard

1.Regular Flooded.

2. AGM Flat Plate.

3.AGM spiral

4.GEL

5.EFB

Battery Type

CCA

Select Input

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

Rating range as following:

Measure Standard Measure Range

CCA 100-2000

BCI 100-2000

CA 100-2000

MCA 100-2000

JIS 26A17--245H52

DIN 100-1400

IEC 100-1400

EN 100-2000

SAE 100-2000

GB 100-1400

Input correct test standard and rating, press ENTER key, tester starts to test, and dynamic interface "TESTING" prompted. See below:

It takes around 3 seconds to display the battery test result.

Battery Test Result

Battery test result includes 5 types as following:

1) Good Battery

The battery is without any problem, please be relaxed to use!

2) Good, Recharge

Good battery but low current, recharge before using.

500

CCA

Setting Rate

Healthy:96% 490CCA

Charge:98% 12.64V

Internal R=6.1mΩ

Rated: 500A

GOOD BATTERY

Healthy:78% 440CCA

Charge:30%12.20V

Internal R=7.2mΩ

Rated: 500A

GOOD, RECHARGE

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

3) Replace

The battery is near to or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed.

4) Bad Cell, Replace

Battery interior damaged, bad cell or short circuit, replace battery.

5) Charge, Retest

Unstable battery shall be recharged and retested to avoid error. If same test result appears after recharge and retest, the battery is regarded

as damaged, replace the battery.

Attention: If "Replace" resulted from IN-VEHICLE mode, it might be the reason that vehicle cable is not well connected with the battery.

Ensure to cut off the cable and retest the battery under OUT-OF-VEHICLE before making a decision to replace battery.

NOTE: After testing, if need to Exit, press EXIT key to directly Exit to the startup interface.

After testing: if it's "IN-VEHICLE" test state, press ENTER key will bring to Cranking Test.

3.2.2 Cranking Test

Tester prompts as following:

Starting the engine as prompted, tester will automatically complete the cranking test and display the result.

Normally, cranking voltage value lower than 9.6V is regarded as abnormal and it is ENTER if it is higher than 9.6V.

Test result of the tester includes actual cranking voltage and actual cranking time.

Start Engine

Cranking Test

RPM Detected

Cranking Test

Healthy:46% 490CCA

Charge:80%12.68V

Internal R=18.1mΩ

Rated: 500A

REPLACE

Healthy:0% 0CCA

Charge:20%10.64V

Internal R=45.2mΩ

Rated: 500A

BAD CELL

，

REPLACE

Healthy:39% 310CCA

Charge:20%12.08V

Internal R=30.1mΩ

Rated: 500A

CHARGE-RETEST

ENDEAVOUR TOOLS ET8626_User Manual

ET8626

When cranking test is abnormal, battery test result will also be displayed at the same time.

This is for the convenience of the maintenance personnel to quickly know the whole state of the starting system according to the data.

After testing finished, do not shut down the engine, press ENTER key to enter Charging Test.

3.2.3 Charging System and Rectifier Diode Test

When enter the charging test, please choose "Charging Test?"

Press ENTER key again to start the charging test.

NOTE: Do not shut down the engine during the test. All electrical appliance and device are in OFF state. Turn on/off any electrical appliance

in the vehicle during the test will affect the accuracy of the test result.

Tester will do the following tests in a sequence:

For ripple test, tester will display the real time ripple and meanwhile, shows ripple volt and charging volt values at the bottom line.

It takes approx. 6 seconds for the ripple test.

After the ripple test, tester will automatically start the loaded voltage test.

Loaded Volt Test takes approx. 3 seconds, then it hints "Step on accelerator to increase engine rotating speed"

Operate accordingly to increase the engine rotating speed to 2500turns or above, and keep for 5 seconds.

Tester starts the charging volt test after increase rev detected.

Times 780ms

Cranking Normal

10.13V

Cranking Test

Times 1020ms

Cranking Low

Replace 10.13V

Cranking Test

95mV 14.32V

Ripple Test

1.Battery Test

2.Cranking Test

3.Charging Test

Test in Vehicle

Loaded Testing

****

Charging Test

Increasing RPM to 2500 r/min

And keep it 5 seconds.

Press OK to continue.

Charging Test

Inhaltsverzeichnis

Andere Endeavour Tools Prüfgeräte Handbücher

Endeavour Tools

Endeavour Tools ET2607 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung