Endress+Hauser ISEmax compressed aircleaning unit Bedienungsanleitung
Products Solutions Services
Operating Instructions
ISEmax compressed air
cleaning unit (230 V AC)
Order no.: 71072583
BA00438C/07/EN/17.17
71396473
ISEmax compressed air cleaning unit (230 V AC) Table of contents
Endress+Hauser 3
Table of contents
1 Document information ......... 4
1.1 Warnings ........................... 4
1.2 Symbols used ........................ 4
2 Basic safety instructions ....... 5
2.1 Requirements for personnel ........... 5
2.2 Designated use ...................... 5
2.3 Occupational safety .................. 5
2.4 Operational safety ................... 5
2.5 Product safety ....................... 6
2.6 IT security .......................... 6
3 Product description ............. 7
3.1 Product design ....................... 7
4 Incoming acceptance and
product identification .......... 8
4.1 Incoming acceptance ................. 8
4.2 Product identification ................. 8
4.3 Scope of delivery ..................... 9
4.4 Certificates and approvals ............. 9
5 Installation .................... 10
5.1 Installation conditions ............... 10
5.2 Mounting the cleaning unit ........... 11
5.3 Post-installation check ............... 12
6 Electrical connection .......... 12
6.1 Connecting the cleaning unit ......... 12
6.2 Post-connection check ............... 13
7 Commissioning ................ 13
7.1 Function check ..................... 13
7.2 Switching on the cleaning unit ........ 14
8 Maintenance .................. 14
8.1 Maintenance schedule ............... 14
8.2 Maintenance tasks .................. 15
9 Repairs ......................... 17
9.1 Spare parts ........................ 17
9.2 Return ............................ 17
9.3 Disposal ........................... 18
10 Technical data ................. 18
10.1 Electrical connection ................ 18
10.2 Performance characteristics .......... 18
10.3 Environment ....................... 18
Index ................................. 20
Document information ISEmax compressed air cleaning unit (230 V AC)
4 Endress+Hauser
1 Document information
1.1 Warnings
Structure of information Meaning
LDANGER
Causes (/consequences)
If necessary, Consequences of non-
compliance (if applicable)
‣Corrective action
This symbol alerts you to a dangerous situation.
Failure to avoid the dangerous situation will result in a fatal or serious injury.
LWARNING
Causes (/consequences)
If necessary, Consequences of non-
compliance (if applicable)
‣Corrective action
This symbol alerts you to a dangerous situation.
Failure to avoid the dangerous situation can result in a fatal or serious injury.
LCAUTION
Causes (/consequences)
If necessary, Consequences of non-
compliance (if applicable)
‣Corrective action
This symbol alerts you to a dangerous situation.
Failure to avoid this situation can result in minor or more serious injuries.
NOTICE
Cause/situation
If necessary, Consequences of non-
compliance (if applicable)
‣Action/note
This symbol alerts you to situations which may result in damage to property.
1.2 Symbols used
Symbol Meaning
Additional information, tips
Permitted or recommended
Not permitted or not recommended
Reference to device documentation
Reference to page
Reference to graphic
Result of a step
ISEmax compressed air cleaning unit (230 V AC) Basic safety instructions
Endress+Hauser 5
2 Basic safety instructions
2.1 Requirements for personnel
• Installation, commissioning, operation and maintenance of the measuring system may be
carried out only by specially trained technical personnel.
• The technical personnel must be authorized by the plant operator to carry out the specified
activities.
• The electrical connection may be performed only by an electrical technician.
• The technical personnel must have read and understood these Operating Instructions and
must follow the instructions contained therein.
• Faults at the measuring point may only be rectified by authorized and specially trained
personnel.
Repairs not described in the Operating Instructions provided must be carried out only
directly at the manufacturer's site or by the service organization.
2.2 Designated use
The product is designed for the cyclic cleaning of ion-selective sensors with compressed air in
municipal wastewater treatment plants. The cleaning intervals are controlled by the
connected transmitter.
Use of the device for any purpose other than that described, poses a threat to the safety of
people and of the entire measuring system and is therefore not permitted.
The manufacturer is not liable for damage caused by improper or non-designated use.
2.3 Occupational safety
As the user, you are responsible for complying with the following safety conditions:
• Installation guidelines
• Local standards and regulations
2.4 Operational safety
Before commissioning the entire measuring point:
1. Verify that all connections are correct.
2. Ensure that electrical cables and hose connections are undamaged.
3. Do not operate damaged products, and protect them against unintentional operation.
4. Label damaged products as defective.
During operation:
‣If faults cannot be rectified:
products must be taken out of service and protected against unintentional operation.
Basic safety instructions ISEmax compressed air cleaning unit (230 V AC)
6 Endress+Hauser
2.5 Product safety
2.5.1 State of the art
The product is designed to meet state-of-the-art safety requirements, has been tested, and
left the factory in a condition in which it is safe to operate. The relevant regulations and
European standards have been observed.
2.6 IT security
We only provide a warranty if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any
inadvertent changes to the device settings.
IT security measures in line with operators' security standards and designed to provide
additional protection for the device and device data transfer must be implemented by the
operators themselves.
ISEmax compressed air cleaning unit (230 V AC) Product description
Endress+Hauser 7
3 Product description
3.1 Product design
12
4
3
5
6
7
A0016120
1 Cleaning unit
1 Pump
2 Housing
3 Suction side with air filter
4 Tube frame (in scope of delivery)
5 Terminal strip with fuse
6 Compressed air supply (to sensor)
7 Safety valve to limit pressure
Incoming acceptance and product identification ISEmax compressed air cleaning unit (230 V AC)
8 Endress+Hauser
4 Incoming acceptance and product identification
4.1 Incoming acceptance
1. Verify that the packaging is undamaged.
Notify the supplier of any damage to the packaging.
Keep the damaged packaging until the issue has been resolved.
2. Verify that the contents are undamaged.
Notify the supplier of any damage to the delivery contents.
Keep the damaged goods until the issue has been resolved.
3. Check that the delivery is complete and nothing is missing.
Compare the shipping documents with your order.
4. Pack the product for storage and transportation in such a way that it is protected
against impact and moisture.
The original packaging offers the best protection.
Make sure to comply with the permitted ambient conditions.
If you have any questions, please contact your supplier or your local Sales Center.
4.2 Product identification
4.2.1 Nameplate
The nameplate provides you with the following information on your device:
• Manufacturer identification
• Order code
• Extended order code
• Serial number
• Ambient and process conditions
• Input and output values
• Safety information and warnings
‣Compare the information on the nameplate with the order.
4.2.2 Product identification
Cleaning unit in the housing
Order no.: 71072583
Manufacturer's address
Endress+Hauser Conducta GmbH+Co. KG
Dieselstraße 24
D-70839 Gerlingen
ISEmax compressed air cleaning unit (230 V AC) Incoming acceptance and product identification
Endress+Hauser 9
4.3 Scope of delivery
The delivery comprises:
• Cleaning unit, complete
• 1 set of Operating Instructions in German
• 1 set of Operating Instructions in English
‣If you have any queries:
Please contact your supplier or local sales center.
4.4 Certificates and approvals
4.4.1 mark
The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EU directives. The manufacturer confirms
successful testing of the product by affixing to it the mark.
Installation ISEmax compressed air cleaning unit (230 V AC)
10 Endress+Hauser
5 Installation
5.1 Installation conditions
230 (9.06)
378 (14.9)
278 (10.9)
106 (4.17)
Pg21
Pg13.5
A0011377
2 Dimensions in mm (inch)
Inhaltsverzeichnis
