18VCOMBI
DRILL
ENE456COM
1. Wear ear protection when using the impact drilling. Exposure to the noise can cause hearing loss.
2. Hold power tool by insulated gripping surfaces, when performing an operation where the
drilling accessory may contact hidden wiring or its own cord. Drilling accessory contacting a “live”
wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
3. Remove the battery pack from the drill before carrying out adjustments.
4. Do not expose to rain or water.
5. Do not store the battery pack in temperatures over 40°C.
6. Always charge the battery pack between temperatures 0°C to 30°C. Ideal charging temperature is 18°C
to 24°C.
7. Only use the charger and the battery pack provided no others.
8. Avoid short circuit of the battery pack connections (screws & nails).
9. Do not incinerate or burn the battery pack, it may explode.
10. Do not charge a damaged battery pack.
11. Always disconnect the charger power supply before making or breaking the connections to the battery
pack.
12. Battery pack and charger will be warm during charging this is normal.
13. When not in use, remove a charged battery pack from the charger.
14. Always remove the battery pack from the charger immediately after re-charging is completed.
15. Your drill and battery pack will be warm when working, this is normal.
16. Do not dispose of batteries in fire, or with household waste. Return exhausted batteries to your local
collection or recycling point.
17. Always check walls, floors and ceilings for hidden power cables and pipes.
18. Accessories and metal parts can become very hot.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
- lead from lead-based paints,
- crystalline silica from bricks and cement and other masonry products, and
- arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out microscopic particles.
SAFETY ADVICE FOR RECHARGEABLE BATTERY AND CHARGER
WARNING! During the use of tools supplied with batteries, the basic safety measures must be
followed in order to reduce fire hazards, electrolyte leakage and personal injury, including the
following precautions:
Ensure that the battery pack is suitable for the tool.
Ensure that outside surface of the battery pack is clean and dry before connecting it to the charger.
Ensure that the batteries are charged using the correct charger recommended by the manufacturer.
Incorrect use can create a risk of electric shock, overheating or the leaking of corrosive liquid from the
battery.
SPECIAL SAFETY INSTRUCTIONS
