Energizer ENA548 Bedienungsanleitung

WARNING:

This Unit employs Components that tend to produce arcs or sparks –To

prevent fire or explosion, do not install in compartments containing

batteries or flammable materials - SHOCK HAZARD. DO NOT OPEN.

CAUTION:

OUTPUT NON-SINUSOIDAL REFER TO MANUAL - Provided with

integral protection against overloads. To prevent fire, do not cover or

obstruct ventilation openings. Do not mount in Zero-Clearance

compartment. Overheating may result.

Notice :

The output of this device is not sinusoidal. It has a total harmonic

distortion of 30% and maximum single harmonic of 8%

Energizer Brands, LLC and related subsidiaries and are used under license by

Bright Manufacturing, LLC. All other brand names are trademarks of their

respective owners. Neither Bright Manufacturing, LLC nor Energizer Brands,

LLC is affiliated with the respective owners of their trademarks.

Energizerpower.com

Printed in China

ENA548

Owner's Guide

1. Introduction

Thank you for purchasing the Energizer® ENA548.

The ENA548 can efficiently and reliably power a

wide variety of devices through both the AC outlets

and USB port. Read this guide before connecting or

using the ENA548 and save it for future reference.

We hope you enjoy using your ENA548 and if you

require any assistance, please contact our help desk:

energizerpower.com/au

2. Important Safety Information

Misusing or incorrectly connecting the ENA548 may

damage the equipment or create hazardous

conditions for users. Read the following safety

instructions and pay special attention to all Caution

and Warning statements in the guide.

Warnings identify conditions that may result in

Personal injury or loss of life.

Caution: Identify conditions or practices that may

damage the unit or other equipment.

WARNING

Keep children away from the ENA548. The

inverter generates the same potentially lethal AC

power as a normal household wall outlet.

Warnings and Cautions

The ENA548 housing may become uncomfortably

warm, reaching 60° C under extended high power

operation. During operation, keep away

from materials that may be affected by high

temperatures.

Do not use the ENA548 in the presence of

flammable fumes or gases, such as in the bilge of a

gasoline powered boat, or near propane tanks. Do

not use the ENA548 in an enclosure

containing automotive-type lead-acid batteries.

These batteries, unlike sealed batteries, vent

explosive hydrogen gas, which can be ignited by

sparks from electrical connections.

WARNING: Shock hazard

Use caution when inserting an AC plug into the

three-prong AC outlet. The prongs of an AC plug can

be bent from misuse. If an AC plug is

improperly inserted into the AC outlet, a bent prong

can slip outside the inverter and become a shock

hazard.

Grip the inverter carefully when inserting or

removing an AC plug. Keep your fingers clear of the

AC outlet. Ensure that your fingers do not contact

the prongs of an AC plug when the plug is partially

inside the inverter.

CAUTION: Risk of Fire.

Do not replace any vehicle fuse with a rating higher

than recommended by the Vehicle Manufacturer.

Ensure that the electrical system in your vehicle

can supply this product without causing the vehicle

fusing to open. Information on the vehicle fuse

rating is typically found in the vehicle operator’s manual.

If a vehicle fuse opens repeatedly, do not keep on

replacing it. The cause of the overload must be found.

On no account should fuses be patched up with

tin foil or wire as this may cause serious damage

elsewhere in the electrical circuit or

CAUTION: Output non-sinusoidal

Some chargers for small nickel-cadmium batteries

can be damaged if connected to the ENA548

Do not use the inverter with the following

appliances:

•Small battery-operated appliances like

rechargeable flashlights, some rechargeable

shavers, and night lights that are plugged

directly into an AC receptacle to recharge.

•Battery chargers used in hand power tools.

These chargers display a warning label stating

that dangerous voltages are present at the

charger battery terminals.

CAUTION

Do not connect live AC power to the ENA548

AC outlets. This will damage the inverter,

and the damage is not covered by warranty.

Do not connect any AC load which has its neutral

conductor connected to ground to the ENA548

Additional Safety Guidelines

•Do not insert foreign objects in the

ENA548 outlets or other openings.

•Never connect the inverter to power utility AC

distribution wiring.

•Do not use the ENA548 in temperatures over

40° C.

•Do not expose the ENA548 to water, rain,

snow, or spray.

Failure to follow these safety guidelines may cause

personal injury and/or damage to the ENA548

It may also void your product warranty.

3. Safety Features

•Overload protection with automatic shutdown

•Low battery voltage shutdown

•High-input voltage protection with automatic

shutdown

•Overheat protection with automatic shutdown

•Output short circuit protection.

4. Inverter Features

ENA548

Front Back

LED Light

ON/OFF

Power

Button

Cooling

USB port

Fan

2.4 Amp

Connectors

AC Outlets

5. Using the Inverter

Through its AC outlet, the ENA548 is capable

of powering most 240V AC devices that consume

500W or less. The ENA548 can also power or

charge most consumer electronics that have

USB power ports.

The ENA548 AC output waveform, called

“modified sine wave” is designed to function

similarly to the sine wave shape of utility power.

Most devices are not affected by a "modified sine

wave", you may need to consult with the

manufacturer of the device you wish to run prior to

connection with inverter.

1. Connect the DC cable port on the ENA548

and connect to a 12V cigarette lighter

receptacle.

2. Plug the device you want to operate into

the ENA548

3. When the inverter is not in use, unplug it from

the 12V outlet to prevent slight discharge of

the battery.

4. When using a device which consumes more

than 120W, connect the alligator clip cables

to the ENA548 and connect the clip end

directly to a 12V battery.

6. Inverter Operation

1. When properly connected to a 12V outlet, the

light will glow GREEN, indicating the

inverter is ready.

2. Plug the product(s) you want to operate into the

AC outlet or USB port and switch them

on (if necessary).

Operating Guidelines

•As the battery depletes, the voltage will start falling.

When the ENA548 senses that the input DC voltage

has dropped to 10.5V, the inverter automatically

shuts down and the light will turn RED, indicating a

fault. This prevents the battery from being

damaged. Turn off any devices that the ENA548 is

powering.

Inhaltsverzeichnis

Andere Energizer Wechselrichter Handbücher

Energizer

Energizer EN1100 Bedienungsanleitung

Energizer

Energizer FORCE S Series Benutzerhandbuch

Energizer

Energizer Beam Series Benutzerhandbuch

Energizer

Energizer EZG1300 Bedienungsanleitung

Energizer

Energizer eZV3200 Bedienungsanleitung

Energizer

Energizer EN150 Bedienungsanleitung

Energizer

Energizer EZG Series Bedienungsanleitung

Energizer

Energizer ENK3000 Bedienungsanleitung

Energizer

Energizer FORCE Series Benutzerhandbuch

Energizer

Energizer SOLAR Force Series Bedienungsanleitung

Energizer

Energizer ENK1100 Bedienungsanleitung

Energizer

Energizer eZV 4500W i-Series Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung