Energy Audissey Series Bedienungsanleitung

MUSICAL TRUTH

LOUDSPEAKERS

owners manual

Audissey

Series

PRINTED IN CANADA

7AI//E-EA

TABLE OF CONTENTS

Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Room Acoustics & Subwoofer Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Selection of Proper Wire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Amplifier Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Amplifier to Loudspeaker Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Conventional hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Bi-Wire hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Combination Bi-Amp/Bi-Wire hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Care of Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Distortion Causes Speaker Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

owners manual Audissey Series

WELCOME TO THE WORLD OF ENERGY

“AUDISSEY” LOUDSPEAKERS.

We are sure you will enjoy this superb product.The following advice is offered to

facilitate proper installation of your Energy speakers in your home.

Extensive research along with great care at every design stage has enabled Energy to

produce loudspeakers with extraordinary performance characteristics: a performance

level that is equal, or superior to other speakers costing many times their price.

The finest components and materials, made with sophisticated manufacturing and quality

control ensure that you will enjoy this exceptional performance for many years.

IMPORTANT: Please retain the carton and packing material for this Energy

product to protect it in the event it ever has to be shipped to a service center for

repair. Product received damaged by a service center that has been shipped by the

end user in other than the original packaging, will be repaired, refurbished and

properly packaged for return shipment at the end user’s expense.

FEATURES AND BENEFITS

Your new Energy “Audissey”Bipolar Series speakers feature state-of-the-art tech-

nologies derived from development of the flagship of the line...the world acclaimed

“Veritas™”v2.8.

Elegant Styling:

Representing an exciting new look, these lean and elegant floor-standing models take up

less than one square foot of floor space, yet their high-tech design suggests they conceal

an entire stage full of musicians.

Bipolar Design:

Unlike conventional front-radiating speakers, the “Audissey”Bipolar Series speakers

employ the exclusive Energy Assymetrical Bipolar™design that disperses sound in a

360 degree pattern imparting the depth, breadth and emotional involvement to your

music and home theater entertainment.

Audissey Series owners manual

ROOM ACOUSTICS AND SPEAKER PLACEMENT

Energy loudspeakers have been designed to provide high performance in a wide vari-

ety of domestic settings. It is important to note however, that building structure, dimen-

sions and furnishings all play a part in the quality of sound you will ultimately achieve.

Where possible the following should be taken into consideration when placing Energy

speakers in your listening room:

1. Low frequency performance (below 100 Hz) can be affected by the structure of the

room. A solid floor is preferred to avoid exaggeration of low frequencies.

2. Rooms with different height, width and length are preferable for best low frequency

performance.

3. Mid and high frequencies are affected by the mix of soft and hard furnishings in the

room. An excess of soft items such as curtains, carpets, sofas and wall coverings can

produce a dull, lifeless reproduction.The same room without any soft furnishings will

produce a brighter, harder sound, so a balance of soft and hard furniture, floor and

wall coverings should be your goal for optimum sonic performance.

4. Most of the sound heard from a loudspeaker has been reflected from one or more

walls of the room. Usually, less than half the sound is heard directly from the

loudspeaker.The remaining information you hear has been reflected from the

surfaces of your room.

Reflective surfaces have individual sound absorption characteristics, and it is

important for good stereo perception that frequency response be the same from

both left and right channels. It is therefore important that consideration be paid to

the left and right reflecting walls. First, they should be symmetrical, equally spaced

from the speakers and the listeners. Secondly, they should have the same, or very

similar reflective properties. Example: A curtain on one wall and a painted surface

on the opposite wall will result in unbalanced reflections, which in turn affect the

stereo image. Experiment with toe-in/toe-out positioning of your speakers until best

results are achieved.

5. Audissey Bipolar loudspeakers are designed to be free standing.They should

therefore be positioned with an open space between the loudspeakers and the

walls of the listening room.

6. The distance from the left and right speaker to the side walls should be equal. For

best results, placement distance from the rear wall should not be the same as from

the side walls. (see figure 1).

owners manual Audissey Series

7. Floor standing models should be positioned at least 38 cm (15”) from the back

wall. Spiked feet are recommended for stability on carpeted floors.

8. The loudspeakers should be placed 2 to 3 meters (6’to 10’) apart.The distance

from loudspeakers to listener should be about 1 to 1.5 times the distance

separating the speakers. (see figure 1).

Audissey Series owners manual

SPEAKER PLACEMENT

(FIGURE 1)

FIRST WALL REFLECTION

BIPOLAR REFLECTION

DIRECT RADIATED SOUND ENERGY

BIPOLAR REFLECTION

Selection of Proper Wire

We recommend the use of high quality speaker cable.The speaker cable you select will

ideally be fitted with high quality connectors with either 5/16”spade lugs or dual banana

plugs.

In most installations, ordinary lamp cord (16-18 gauge) has enough resistance to

degrade the signal between amplifier and speakers, particularly in lengths over 3 meters

(10’). If possible the speaker cables should be the same length for both channels and the

shorter they are, the better the sonic performance will be.

* When connecting your speakers to your sound system, turn off your

amplifier to avoid damage which could result from shorting of the

speaker leads.

Amplifier Requirements

Energy loudspeakers have been designed to be driven to high listening levels with

moderate power, while at the same time being capable of handling the power output of

large amplifiers.

NOTE: The Energy “Audissey”Bipolar series speakers are 6 ohms nominal (4

ohm minimum) and will function well with most amplifiers. If using more than one set

of speakers, powered by one amplifier, please check with the amplifier manufacturer

to confirm that the amplifier can handle loads of 3 ohms.

Amplifier to Loudspeaker Connection

The Audissey Bipolar loudspeakers utilize two sets of binding posts.The upper set is for

high frequencies and the lower for lower frequencies. Bi-amp/bi-wire allows three

different wiring options.

1) Conventional Hook-up - You will note shorting straps have been installed.

(see figure 2) - Positive (+) to Positive, Negative (–) to Negative. Connect speaker

wire from the red positive (+) terminal on amplifier to lower positive terminal on

speaker. Connect black negative (–) terminal from amplifier to lower negative

terminal on speaker.

2) Bi-Wire Hook-up - Remove shorting straps. Use two dual conductor cables; one

cable for low frequencies and one cable for high frequencies. Separate connections

are made between the power amplifier to the low frequencies binding posts on the

speaker and from the power amplifier to the high frequency binding posts.This

allows you to choose separate wires that are best suited for the low or high

frequencies. (see figure 3)

owners manual Audissey Series

Audissey Series owners manual

LEFT CHANNEL RIGHT CHANNEL

AMPLIFIER OR RECEIVER

–+–+

OUTPUT

–

LEFT CHANNEL RIGHT CHANNEL

AMPLIFIER OR RECEIVER

+–

CONNECT TO RIGHT

SPEAKER(AS SHOWN

ABOVE FOR

LEFT SPEAKER)

CONNECT TO RIGHT

SPEAKER (AS SHOWN

ABOVE FOR

LEFT SPEAKER)

IMPORTANT: REMOVE GOLD SHORTING

BARS, WHICH HAVE BEEN

FACTORY INSTALLED

BETWEEN BOTH RED INPUT

TERMINALS AND BOTH

BLACK INPUT TERMINALS.

NOTE: ENSURE THAT ONE GOLD

SHORTING BAR IS CONNECTED AS

SHOWN BETWEEN THE TWO RED

INPUT TERMINALS AND ONE BETWEEN

BLACK INPUT TERMINALS.

LEFT SPEAKER LEFT SPEAKER

CONVENTIONAL HOOKUP

(FIGURE 2)

BI-WIRE HOOKUP

(FIGURE 3)

owners manual Audissey Series

CONNECT TO THE LEFT CHANNEL

OUTPUT OF YOUR PRE-AMPLIFIER CONNECT TO THE RIGHT CHANNEL

OUTPUT OF YOUR PRE-AMPLIFIER

TWO CHANNEL

AMPLIFIER (1) TWO CHANNEL

AMPLIFIER (2)

OUTPUT

CHANNEL A CHANNEL B

INPUT

OUTPUT

CHANNEL A CHANNEL B

INPUT

LEFT SPEAKER RIGHT SPEAKER

IMPORTANT

REMOVE GOLD SHORTING

BARS WHICH HAVE BEEN

FACTORY INSTALLED

BETWEEN BOTH RED INPUT

TERMINALS AND BOTH

BLACK INPUT TERMINALS.

COMBINATION BI-AMP/BI-WIRE HOOKUP

(Figure 4)

(THIS METHOD USES TWO IDENTICAL CHANNEL AMPLIFIERS FOR IMPROVED SYSTEM PERFORMANCE

3) Combination Bi-Amp/Bi-Wire Hook up - This method uses separate

amplifiers for the low frequency section and high frequency section of the speaker.

This dramatically improves musicality.The amplifier’s gains and the phase relationship

of the amplifier’s input to output must be identical. (see figure 4)

Care of Finish

Your Energy speakers are attractively finished and should be gently wiped clean, from

time to time, with a damp cloth to remove any dust or stains.

Distortion Causes Speaker Damage

When an amplifier is “overdriven”it produces distorted output power several times

greater than its rated power. All amplifiers produce high levels of distortion when they

are driven beyond their rated power output and this distortion can damage any speaker.

Overdriven amplifier distortion is called “Clipping”.

Clipping can be identified by a fuzzy or distorted sound. If this is heard, lower the vol-

ume immediately to avoid damage to your system. If louder volumes are desired, the

only practical solution is to obtain an amplifier capable of more clean (undistorted) out-

put power.

Audissey Series owners manual

SPECIFICATIONS

A2+2 A3+2 A5+2

SYSTEM TYPE: Asymmetrical Asymmetrical Asymmetrical

Bipolar Radiated Vented Bipolar Radiated Vented Bipolar Radiated Vented

TWEETERS: 2x1 (25mm) Aluminium 2x1 (25mm) Aluminium 2x1 (25mm) Aluminium

Dome Tweeter with cloth Dome Tweeter with cloth Dome Tweeter with cloth

suspension in Bipolar suspension in Bipolar suspension in Bipolar

array array array

WOOFERS: 2x5 1/2”(14cm) I.M 2x5 1/2”(14cm) I.M 2x5 1/2”(14cm) I.M

Carbon/Mica polypropylene Carbon/Mica polypropylene Carbon/Mica polypropylene

woofers with compression woofers with compression Mid Bass drivers with

molded N.B.R. surrounds in molded N.B.R. surrounds in compression molded N.B.R.

a Bipolar array mounted on the front Baffle surrounds mounted on the

rear Baffle

1 x 5 1/2”(14cm) I.M. 1 x 5 1/2”(14cm) I.M.

Carbon/Mica polypropylene Carbon/Mica polypropylene

woofer with compression Mid Bass drivers with

molded N.B.R. surrounds in compression molded N.B.R.

mounted on the front Baffle surrounds mounted on the

rear Baffle

SUBWOOFERS: 2x8”(20.3 cm) Integrated

subwoofers - side firing

FREQUENCY RESPONSE: 35 Hz - 25 KHz 30 Hz - 25 KHz 25 Hz - 25 KHz

CROSSOVER POINTS: 2.0 KHz 1.8 KHz 200 KHz, 1.8 KHz

SENSITIVITY: 90 dB 91 dB 93 dB

IMPEDANCE: 6 ohms (nominal) 6 ohms (nominal) 6 ohms (nominal)

4 ohms (minimum) 4 ohms (minimum) 4 ohms (minimum)

REC.AMP POWER: 30 - 175 watts RMS 30 - 225 watts RMS 30 - 225 watts RMS

clipping less than 10%

DIMENSIONS:

(in) 36 7-1/2 x 10-1/2 40-1/4 x 7-1/2 x 13 45-1/4 x 8-5/8 x 13

(cm) 91.44 x 19 x 27 102 x 19 x 33 114.9 x 21.8 x 33

WEIGHT (each): 40 lbs. (18.2 kg) 48 lbs. (21.8 kg) 65 lbs. (29.5 kg)

FINISH: Black High Gloss Black High Gloss Black High Gloss

GRILLE COLOUR: Black Black Black

DESCRIPTIONS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

owners manual Audissey Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Energy Sprecher Handbücher

Energy

Energy Veritas V2.3 Bedienungsanleitung

Energy

Energy Power Bar One Bedienungsanleitung

Energy

Energy Reference Connoisseur RC-R Bedienungsanleitung

Energy

Energy MUSICAL TRUTHTM Bedienungsanleitung

Energy

Energy Power EM-2.1 Bedienungsanleitung

Energy

Energy Take Classic 5 Pack Bedienungsanleitung

Energy

Energy Take Classic I/O 5 Bedienungsanleitung

Energy

Energy ESW-V8 Bedienungsanleitung

Energy

Energy Power Bar One Bedienungsanleitung

Energy

Energy Connoisseur CC-5 Bedienungsanleitung

Energy

Energy e:XL-16 Bedienungsanleitung

Energy

Energy CS-30 Bedienungsanleitung

Energy

Energy S8.3 Bedienungsanleitung

Energy

Energy Take FPS Bedienungsanleitung

Energy

Energy Tempest II Bedienungsanleitung

Energy

Energy Veritas Series Bedienungsanleitung

Energy

Energy Connoisseur CF-50 Bedienungsanleitung

Energy

Energy ESW-V10 Bedienungsanleitung

Energy

Energy Connoisseur CF-70 Bedienungsanleitung

Energy

Energy take classic satellite Bedienungsanleitung

Energy

Energy Connoisseur CF-30 Bedienungsanleitung

Energy

Energy V-SW10 Bedienungsanleitung

Energy

Energy indoor / outdoor loudspeaker Bedienungsanleitung

Energy

Energy Connoisseur CB-10 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung