ENFORCER FIREBULL 200 Bedienungsanleitung

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Operation and Maintenance Manual

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Table of Contents

Chapter 1 Page

-Product Introduction 3

-Product Warranty 3-4

-Safe Operating Procedures 5-6

Chapter 2 Page

-System Description 7

-System Specifications 7

Chapter 3 Page

-Set Up 8

-Preventative Maintenance Checks and Services 9

-Operating Instructions 10-11

Chapter 4 Page

-Training 12

Chapter 5 Page

-Maintenance 13-16

-Servicing and Maintenance Activities 17-18

-Troubleshooting 18-19

Chapter 6 Page

-Pictures 20-21

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

CAUTION: User should read and follow all Safety Rules and

Operating Instructions BEFORE first use of this product!

Chapter 1

Introduction

1-1. Manufacturer

a. The Enforcer 200 is Manufactured by:

Enforcer One, LLC

473 Dividend Drive

Peachtree City, GA 30269

United States of America

Phone: 770.460.7793

Fax: 678.604.0107

E-mail: Info@enforcerone.com

Website: www.enforcerone.com

b. Enforcer One, LLC is committed to the satisfaction of our owners and operators of

the Enforcer 200. If you have any problems, questions, or concerns please contact

Enforcer One, LLC via phone, Fax, or E-mail.

1-2. Warranty

Limited Warranty

Fire Service Plus, Inc. warrants to the original owner-user that Enforcer One, LLC line of

Compressed Air Foam products will be free from failures due to defects in workmanship for a

period of one year from the date of original purchase. During the warranty period, Enforcer One,

LLC , at its sole discretion, will repair or replace at no charge, the product that, in its sole opinion, is

defective.

The purchaser is responsible for packing the product for shipment and for charges to ship the

product to the location specified by Enforcer One, LLC, including, at the purchaser’s sole discretion,

insurance on the shipment. Enforcer One, LLC will return the product pre-paid to the purchaser.

If the product has been altered, modified or repaired in any way, or if the failure is the result of

misuse, abuse or misapplication without the prior consent of Enforcer One, LLC, this warranty shall

be void and Enforcer One, LLC shall have no obligation to repair or replace the failed product.

The use of any foam product other than FIREBULL® Fluorine Free Foam products will void the

warranty.

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

CAUTION: The unpredictable nature of fires, the techniques used to apply

product(s) as well as the knowledge-understanding and judgment of the

individual(s) attempting to extinguish or control them will affect the performance

of Enforcer One, LLC product(s).

CAUTION: Prior to attempting to operate this or any Enforcer One, LLC product, you

MUST read and understand all directions and instructions in this user manual. Until

you have read and understand all CAUTIONS; Warnings, Requirements, Instructions

for Set-up & Testing - Operation and Maintenance: NO ATTEMPT should be made to

operate this or any Enforcer One, LLC product. In order to assure that your Enforcer

One, LLC product(s) are ready when needed, they must be regularly maintained as

outlined. FAILURE TO COMPLY WITH ALL CAUTIONS, WARNINGS, REQUIREMENTS,

INSTRUCTIONS, PROCEDURES AND MAINTENANCE WILL VOID THIS WARRANTY &

MAY RESULT IN SERIOUS INJURY OR DEATH &/OR DAMAGE TO OR LOSS OF

PROPERTY.

Warranty – continued

When used in conjunction with sound fire management practices and strictly as per the

manufacturer’s instructions, the products may provide protection against anticipated fires and

may accelerate the extinguishing of existing fires.

THIS WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY FOR ENFORCER ONE, LLC LINE OF

PRODUCT(S) AND DISCLAIMS AND EXCLUDES ANY AND ALL IMPLIED WARRANTIES REGARDING

THE PRODUCT(S) INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

No person or entity is authorized to bind Enforcer One, LLC to any other warranty obligation or

liability to distributer, purchaser or any third party for any loss of profits, economic loss,

indirect, incidental, punitive, special or consequential damages whatsoever and howsoever

caused. Operation or use of this or any Enforcer One, LLC product for which this warranty is

issued shall constitute acceptance of the terms hereof.

SAFE OPERATING REQUIREMENTS

1. DO NOT attempt to use this or any Enforcer One, LLC line of product(s) if they appear

damaged and/or broken. Missing or damaged components MUST be properly repaired or

replaced as soon as possible.

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Safe Operating Requirements – continued

2. DO NOT attempt to use this or any Enforcer One, LLC line of product(s) if you are tired,

injured or under the influence of drugs, medication or alcohol.

3. DO keep children and bystanders away from the area when Enforcer One, LLC product(s)

are in-use.

4. DO NOT attempt to use this or any Enforcer One, LLC line of product(s) in the event that the

fire represents a situation that is beyond the capabilities of the Operator and/or the

Equipment.

5. DO follow the proper Set-up, Testing, and Maintenance & Inspection Procedures to assure

that your Enforcer One, LLC line of product(s) is/are ready for use when needed.

6. DO exit the area IMMEDIATELY if progress in fighting the fire is not being made and DO NOT

return to the area.

7. DO comply with all local Laws & Regulations related to the proper use, installation,

maintenance, training and inspection of Fire-Fighting Equipment.

WARNING: The act of fighting fire is both hot and dangerous work. Smoke, heat,

unseen fumes/gases and flames can be easily underestimated. In the absence of the

proper training, protective gear and clothing, extreme caution should be exercised to

avoid serious injury or death. If ever, in an attempt to extinguish a fire, you are

unsure that progress is being made, contain the fire (if possible) and move quickly and

safely away from the threat.

1-3. Manual Changes

1. Enforcer One, LLC will provide equipment update changes to this manual on an

as need basis.

2. This manual supersedes all previous Operating Instructions for the Enforcer 200

system.

ADDITIONAL INFORMATION

http://www/usfa.fema.gov/safety/sheets.htm

http://www.nfpa.org/education/index.html

http://www.ilpi.com/safety/extinguishers.html

http://www.EnforcerOne.com

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Chapter 2

System Description

2-1. General Information

The Enforcer 200 Compressed Air Foam System utilizes compressed air to propel

firefighting foam. Enforcer 200 produces air aspirated foam providing a thick vapor

sealing blanket that will inhibit re-ignition. The Enforcer 200 will produce up to 4000

gallons of finished foam with discharge duration of up to 20 minutes. The system can be

easily recharged by the end user.

2-2. Model Configuration

The Enforcer 200 consists of a Premix Tank which holds 200 gallons of pre-mixed

FIREBULL® Fluorine Free Foam. Two compressed air cylinders are attached to the

Premix Tank through a regulator and hose assembly. Discharge hose include one 300’

section of 1” Booster Hose on a hose reel with pistol grip style nozzle. Enforcer 200 also

includes one 50’ section of 1.5” lay flat hose with pistol grip style nozzle. The Enforcer

200 can discharge both hoses simultaneously.

2-3. Specifications

-Height: 39 “ (99 cm) Length:97 ” (246 cm) Width: 44 ” ( 112cm.)

-Empty Weight: 2000 lbs. (998 kg) Loaded Weight: 3200 lbs. (1360 kg)

-Premix Tank: 200 US Gallons (757 l)

-Finished Foam Capacity: 4000 US Gallons (13,514 l)

-Foam Discharge Distance: Up to 95 Feet ( 29 m)

-Air Cylinders: 300 cu. ft. 2400 psi (165.5 bar)

-Recharge Time: 20 minutes

2-4. Transporting

The Enforcer 200 should be secured when transporting in trailers or vehicles.

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Chapter 3

Operating Instructions

3-1. Initial Setup

The Enforcer 200 comes fully assembled. The 200-gallon Premix Tank and Compressed

Air Cylinder must be filled prior to use. The proper FIREBULL® Fluorine Free Foam

product should be selected based on operational ambient temperatures and type of

anticipated fires before putting the unit into service.

3-2. FIREBULL® Fluorine Free Foam Products

a. Enforcer 3 Backpack should only be used with FIREBULL® Fluorine Free Foam

products mixed at a 1%, 3% or 6% solution for low, medium and high expansion.

b. It is recommended that a FIREBULL® Freeze Protected Fluorine Free Foam Product

be used when positioning the unit outside during extended subfreezing weather.

3-3. System Depressurization

Ensure the system is depressurized before conducting maintenance

a. Close the Air Cylinder Valves.

b. Open nozzle until all Nitrogen is deployed and working pressure gauge reads zero or

open Pressure Relief Valve.

3-4. Preventative Maintenance Checks & Services (PMCS)

a. It is recommended that the PMCS CHECKLIST be completed every month.

b. Personnel conducting the PMCS should be thoroughly familiar with the Enforcer 200

system and the information contained in this manual.

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Preventative Maintenance Checks and Services (PMCS)

Checklist

Date Completed

Name Signature

1. Conduct a visual inspection of the system for chaffing or loose hose(s), dirt,

corrosion or damage.

2. Check the Air Cylinder for normal operating pressure (1800-2200 psi).

a. Ensure System is depressurized.

b. Disconnect Air Cylinders and pull out of unit.

c. Connect Air Cylinder Pressure Check Gauge.

d. Open Air Cylinder and check for normal operating pressure. (1800-

2200psi)

e. Close Air Cylinder and slowly disconnect Pressure Check Gauge allowing

for pressure bleed off.

f. If the Air Cylinder pressure is below 1500 psi remove, recharge and

replace the Air Cylinder.

The Air Cylinder should normally be left in the closed position.

______ 3. Check the Premix Tank Level

a. Disconnect fill tower Cap check liquid level.

b. Fill up the Premix Tank if low.

_______ 4. Check the tire condition.

Note any other Problems:

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

3-5. Operating Instructions

Warning

Always refer to the product MSDS for proper precautions and treatment(s) if foam is

accidently ingested or sprayed in eyes, mouth or nose

a. Turn the Regulator to zero, so no air can pass through it.Slowly open both Air

Cylinders. Turn the Regulator up to chosen operating pressure between (150 psi-

175 psi) allowing the Premix Tank to fill with compressed air. (Some Models are

factory set to 150 psi)

b. Extend one or both hoses that will be used for discharge. Ensure the Nozzle ball

valve is in the closed position.

c. Open the Foam Discharge Valve for the selected discharge hose slowly to the fully

open position.

d. Grasp the nozzle with hand.

e. Aim the nozzle at the base of the fire and open valve to discharge foam.

3-6. Cold Weather Operations

a. It is recommended that a FIREBULL® Fluorine Free Foam Pre-Mix product is used

when freezing is anticipated.

3-7. Emergency Procedures

a. Loose Hose

1. Go to the unit and close the Foam Discharge Valve.

2. Go to the Nozzle and close the valve.

b. No Foam Discharge

1. Check to see if Air Cylinder is full.

2. Verify the Air Cylinder Valve is turned completely on.

3. Ensure Air Pressure Hose is attached to the Air Cylinder properly.

4. Ensure the Regulator is on the correct operating pressure.

5. Check for obstruction in discharge hose.

c. Shut Down Procedures

1. Close the Nozzle Valve.

2. Close the Foam Discharge Valve.

3. Close the Air Cylinder Valve.

4. Open Nozzle valve to depressurize the hose line.

5. Open the Depressurizing Valve to depressurize the Premix Tank.

6. Secure discharge hose.

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Chapter 4

Training

4-1. Training Program

a. Training on the Enforcer 200 should be conducted or reviewed annually for all

operators

b. Maintenance personnel should complete initial training and refresher training as

required

c. Trainers should be thoroughly familiar with the system, fire behavior, hazard

identification, and basic firefighting techniques

d. Operator training should be accomplished in live fire scenarios. Live fire training can

often be accomplished through coordination with a local fire department.

4-2. Training Program of Instructions

a. Operators and Maintenance Personnel

1. PMCS

2. Normal and Cold Weather Operating Instructions

3. Emergency Procedures

4. Operation in live fire scenario

b. Maintenance Personnel

1. General Maintenance

2. Instructions and Technical Assistance

3. Foam Product

4. Maintenance Log

5. Servicing Under Normal and Cold Conditions

6. Scheduled Maintenance

7. Unscheduled Maintenance

8. Troubleshooting Procedures

9. Storage and Protection

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ENFORCER Industrieanlagen Handbücher

ENFORCER

ENFORCER SM-4601-LQ Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung