Enterasys FN 100 Bedienungsanleitung

FN 100 User’s Guide

Notice

Enterasys Networks reserves the right to make changes in specifications and other information

contained in this document without prior notice. The reader should in all cases consult Enterasys

Networks to determine whether any such changes have been made.

The hardware, firmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL ENTERASYS NETWORKS BE LIABLE FOR ANY INCIDENTAL, INDIRECT,

SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED

TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR THE INFORMATION

CONTAINED IN IT, EVEN IF ENTERASYS NETWORKS HAS BEEN ADVISED OF, KNOWN, OR

SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH DAMAGES.

Virus Disclaimer

Enterasys has tested its software with current virus checking technologies. However, because no anti-

virus system is 100% reliable, we strongly caution you to write protect and then verify that the

Licensed Software, prior to installing it, is virus-free with an anti-virus system in which you have

confidence.

Enterasys Networks makes no representations or warranties to the effect that the Licensed Software is

virus-free.

Printed in the United States of America.

Order Number: 9031897-03 April 2000

Enterasys Networks.

P.O. Box 5005

Rochester, NH 03866-5005

Enterasys, NetSight, and Matrix E7 are trademarks of Enterasys Networks.

Cabletron Systems, SPECTRUM, BRIM, DNI, FNB, INA, Integrated Network Architecture,

LANVIEW, LANVIEW Secure, Multi Media Access Center, MiniMMAC, and TRMM are registered

trademarks, and Bridge/Router Interface Modules, BRIM-A100, CRBRIM-W/E, CRXMIM,

CXRMIM, Desktop Network Interface, Distributed LAN Monitoring, Distributed Network Server,

DLM, DNSMIM, E1000, E2000, E3000, EFDMIM, EMM-E6,EMME,EPIM,EPIM-3PS, EPIM-A,

EPIM-C,EPIM-F1,EPIM-F2,EPIM-F3,EPIM-T,EPIM-T1,EPIM-X,ESXMIM,ETSMIM,ETWMIM,

FDCMIM-04,FDCMIM-08,FDMMIM,FDMMIM-04,Flexible Network Bus,FOMIM,FORMIM,

HubSTACK, IRBM,IRM,IRM-2,IRM-3,Media Interface Module,MicroMMAC,MIM,MMAC,

MMAC-3,MMAC-3FNB,MMAC-5,MMAC-5FNB,MMAC-8,MMAC-8FNB,MMAC-M8FNB,

MMAC-Plus,MRX,MRXI,MRXI-24,MultiChannel,NB20E,NB25E,NB30,NB35,NBR-220/420/620,

RMIM,SecureFast Packet Switching,SFPS,SPECTRUM Element Manager,SPECTRUM for Open

Systems,SPIM-A,SPIM-C,SPIM-F1,SPIM-F2,SPIM-T,SPIM-T1,TPMIM,TPMIM-22,

TPMIM-T1,TPRMIM,TPRMIM-36,TPT-T,TRBMIM, TRMM-2, TRMMIM, and TRXI are

trademarks of Cabletron Systems, Inc.

AppleTalk, Apple, Macintosh, and TokenTalk are registered trademarks; and Apple Remote Access

and EtherTalk are trademarks of Apple Computer, Inc.

SmartBoost is a trademark of American Power Conversion

ST is a registered trademark and C++ is a trademark of AT&T

Banyan and VINES are registered trademarks of Banyan Systems, Inc.

cisco, ciscoSystems, and AGS+ are registered trademarks; and cBus, cisco Router, CRM, IGS, and MGS

are trademarks of cisco Systems, Inc.

GatorBox is a registered trademark; and GatorMail, GatorMIM, GatorPrint, GatorShare, GatorStar,

GatorStar GX-M, and XGator are trademarks of Cayman Systems, Inc.

CompuServe is a registered trademark of CompuServe Incorporated

X Window System is a trademark of Consortium, Inc.

CTERM, DECnet, and ULTRIX are registered trademarks; and DEC, DEC C++, DECnet-DOS,

DECstation, VAX DOCUMENT, VMA, and VT are trademarks of Digital Equipment Corporation

Fore Systems, ForeRunner, and ForeRunner ASX-100 are trademarks of Fore Systems, Inc.

PC/TCP is a registered trademark of FTP Software, Inc.

HP OpenView is a registered trademark of Hewlett-Packard, Inc.

AIX, IBM, OS/2, NetView, and PS/2 are registered trademarks; and AT, Micro Channel, PC, PC-DOS,

PC/XT, Personal Computer AT, Operating System/2, Personal System/2, RISC System/6000, and

Workplace Shell are trademarks of International Business Machines Corporation

i960 microprocessor is a registered trademark; and Intel and Multichannel are trademarks of Intel

Corporation

Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation

Chameleon, ChameleonNFS, Chameleon 32, IPX/link, and NEWT are trademarks of

NETMANAGE, Inc.

NetWare and Novell are registered trademarks; and Internetwork Packet Exchange (IPX), IPX, and

Network File System (NFS) are trademarks of Novell, Inc.

Motif and MS are registered trademarks; and Open Software Foundation, OSF, OSF/1, and OSF/Motif

are trademarks of The Open Software Foundation, Inc.

Silicon Graphics and IRIS are registered trademarks; and Indigo and IRIX are trademarks of Silicon

Graphics, Inc.

NFS, PC-NFS, SPARC, Sun Microsystems, and Sun Workstation are registered trademarks; and

OpenWindows, SPARCstation, SPARCstation IPC, SPARCstation IPX, Sun, Sun-2, Sun-3, Sun-4,

Sun386i, SunNet, SunOS, SunSPARC, and SunView are trademarks of Sun Microsystems, Inc.

OPEN LOOK and UNIX are registered trademarks of Unix System Laboratories, Inc.

Ethernet, NS, Xerox Network Systems and XNS are trademarks of Xerox Corporation

iii

ANNEX, ANNEX-II, ANNEX-IIe, ANNEX-3, ANNEX-802.5, MICRO-ANNEX-XL, and MICRO-

ANNEX-ELS are trademarks of Xylogics, Inc.

MAXserver and Xyplex are trademarks of Xyplex, Inc.

Restricted Rights Notice

(Applicable to licenses to the United States Government only.)

1. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS

252.227-7013.

Enterasys Networks, 35 Industrial Way, Rochester, New Hampshire 03867.

2. (a) This computer software is submitted with restricted rights. It may not be used, reproduced, or

disclosed by the Government except as provided inparagraph (b) ofthis Notice or as otherwise

expressly stated in the contract.

(b) This computer software may be:

(1) Used or copied for use in or with the computer or computers for which it was acquired,

including use at any Government installation to which such computer or computers may

be transferred;

(2) Used or copied for use in a backup computer if any computer for which it was acquired

is inoperative;

(3) Reproduced for safekeeping (archives) or backup purposes;

(4) Modified, adapted, or combined with other computer software, provided that the

modified, combined, or adapted portions of the derivative software incorporating

restricted computer software are made subject to the same restricted rights;

(5) Disclosed to and reproduced for use by support service contractors in accordance with

subparagraphs (b) (1) through (4) of this clause, provided the Government makes such

disclosure or reproduction subject to these restricted rights; and

(6) Used or copied for use in or transferred to a replacement computer.

software, it is licensed to the Government, without disclosure prohibitions, with the minimum

rights set forth in paragraph (b) of this clause.

(d) Any other rights or limitations regarding the use, duplication, or disclosure of this computer

software are to be expressly stated in, or incorporated in, the contract.

(e) This Notice shall be marked on any reproduction of this computer software, in whole or in part.

Contents

Chapter 1 Introduction

Using the FN100 User’s Guide ...................................................................................1-1

Related Manuals............................................................................................................ 1-2

Software Conventions .................................................................................................. 1-2

Common FN100 Window Fields ......................................................................... 1-3

Using the Mouse....................................................................................................1-4

Using Window Buttons......................................................................................... 1-5

Getting Help .................................................................................................................. 1-6

Using On-line Help................................................................................................1-6

Getting Help from the Global Technical Assistance Center............................1-6

Chapter 2 The FN100 Chassis View

Viewing Chassis Information...................................................................................... 2-2

Front Panel Information........................................................................................ 2-2

Menu Structure....................................................................................................... 2-4

The FN100 Port Status Displays .......................................................................... 2-7

Selecting a Port Status View.......................................................................... 2-7

Port Status Color Codes.................................................................................2-9

The Chassis Manager Window............................................................................2-9

Viewing Hardware Types................................................................................... 2-10

Viewing the Device Type............................................................................. 2-10

Viewing the Port Description...................................................................... 2-10

Managing the Hub.......................................................................................................2-11

Using Device Find Source Address....................................................................2-11

Viewing I/F Summary Information..................................................................2-13

Interface Performance Statistics/Bar Graphs........................................... 2-14

Viewing Interface Detail.............................................................................. 2-16

Making Sense of Detail Statistics.........................................................2-18

Viewing CSMACD Statistics .............................................................................. 2-19

Receive Errors ............................................................................................... 2-19

Transmission Errors...................................................................................... 2-20

Collision Errors.............................................................................................2-21

Enabling and Disabling Ports ............................................................................2-21

Chapter 3 FN100 Virtual Switching

Performing Virtual Switching ..................................................................................... 3-1

Configuring Your Virtual Switch Settings..........................................................3-2

Defining a Default Switch ............................................................................. 3-3

Contents

Chapter 4 Using FN100 Trunking

The Port Trunking Window.........................................................................................4-2

Enabling and Disabling Trunking .......................................................................4-5

Chapter 5 Workgroup Configuration

Configuring a Workgroup............................................................................................5-2

Deleting a Workgroup...........................................................................................5-3

Index

1-1

Chapter 1

Introduction

How to use this guide; related guides; software conventions; getting help

Welcome to the FN100™ User’s Guide. We have designed this guide to serve as a

simple reference for using NetSight Element Manager for the FN100.

As a part of the Fast Network product line of switches, the FN100 provides a

foundation for high speed scalable Ethernet switching solutions. The FN100 is a

high performance, intelligent Fast Ethernet switch designed to support full 10

Mbps or 100 Mbps connectivity on 8 or 16 ports over unshielded twisted-pair

(UTP) and/or multimode (MM) fiber. The FN100 consists of 8 or 16 10/100Base-

TX or 10/100Base FX ports and, in the case of the TX models, 1 or 2 selectable

100Base-FX ports. The FN100 is IEEE 802.2, 802.3 and 802.1d compliant, includes

built-in SNMP management, and supports MIB II, PPP, and Enterprise MIB.

Using the FN100 User’s Guide

Each chapter in this guide describes one major functionality or a collection of

several smaller functionalities of the FN100 device module. This guide contains

information about software functions which are accessed directly from the device

icon.

Chapter 1, Introduction, provides a list of related documentation, describes

certain software conventions, and shows you how to contact the Global Technical

Assistance Center.

Chapter 2, The FN100 Chassis View, describes the visual display of the FN100-

switch and explains how to use the mouse within the Chassis View; the operation

of chassis-level management functions — like enabling and disabling ports — is

also described here.

Chapter 3, FN100 Virtual Switching, describes using the FN100 Virtual Switching

window to refine your network and control bandwidth usage by assigning the

FN100’s ports to any of four available virtual switches.

Introduction

1-2 Related Manuals

Chapter 4, Using FN100 Trunking, details using the FN100 Port Trunking

window to create trunk groups, allowing you to increase aggregate bandwidth

when two or more switches are connected.

Chapter 5, Workgroup Configuration, describes configuring work groups by

specifying a subset of device ports and the type(s) of packets (multicast, unicast,

or both) that are to be forwarded by those ports, thereby allowing you to restrict

multicast traffic from being propagated through every bridge port on your device.

Related Manuals

The FN100 User’s Guide is only part of a complete document set designed to

provide comprehensive information about the features available to you through

NetSight Element Manager. Other guides which include important information

related to managing the FN100 include:

User’s Guide

Tools Guide

Remote Administration Tools User’s Guide

Remote Monitoring (RMON) User’s Guide

Alarm and Event Handling User’s Guide

For more information about the capabilities of the FN100, consult the appropriate

hardware documentation.

Software Conventions

NetSight Element Manager’s device user interface contains a number of elements

which are common to most windows and which operate the same regardless of

which window they appear in. A brief description of some of the most common

elements appears below; note that the information provided here is not repeated

in the descriptions of specific windows and/or functions.

Andere Handbücher für FN 100

Inhaltsverzeichnis

Andere Enterasys Schalten Handbücher

Enterasys

Enterasys SmartSwitch 2200 Bedienungsanleitung

Enterasys

Enterasys Matrix E1 1H582-51 Kurzanleitung

Enterasys

Enterasys Vertical Horizon VHIM1000-S1LX 1000BASE-LX Bedienungsanleitung

Enterasys

Enterasys Mid-Span Power Hub Bedienungsanleitung

Enterasys

Enterasys Vertical Horizon VH-2402-L3 Bedienungsanleitung

Enterasys

Enterasys Matrix-V V2H124-24 Bedienungsanleitung

Enterasys

Enterasys Vertical Horizon VH-2402-L3 Programmierhandbuch

Enterasys

Enterasys FN10 Handbuch

Enterasys

Enterasys RoamAbout RBT-8200 Bedienungsanleitung

Enterasys

Enterasys A4H124-24 Handbuch

Enterasys

Enterasys SmartSwitch 6G302-06 Bedienungsanleitung

Enterasys

Enterasys Matrix 7G4280-19 Handbuch

Enterasys

Enterasys Enterasys Gold Distributed Forwarding Engine... Handbuch

Enterasys

Enterasys Enterasys Matrix DFE-Gold Series Bedienungsanleitung

Enterasys

Enterasys Vertical Horizon VH-2402S Bedienungsanleitung

Enterasys

Enterasys SecureStack C2 C2G124-24 Handbuch

Enterasys

Enterasys FN 100 Handbuch

Enterasys

Enterasys Vertical Horizon VHIM100-S2MFX 100BASE FX-SC Bedienungsanleitung

Enterasys

Enterasys G3G124-24 Bedienungsanleitung

Enterasys

Enterasys SecureStack C3K122-24 Handbuch

Enterasys

Enterasys Enterasys RoamAbout RBT-1002-EU Anleitung zur Verwendung

Enterasys

Enterasys MicroMMAC-T Bedienungsanleitung

Enterasys

Enterasys SecureStack C3 C3G124-24P Bedienungsanleitung

Enterasys

Enterasys 08H20G4-24 Handbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung