Entone Nova Bedienungsanleitung

NOVA

Remote Control Guide (EMEA)

any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the

prior written consent of Entone, Inc., 20863 Stevens Creek Blvd, Suite 300, Cupertino, CA 95014, U.S.A.

DISCLAIMER

IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPY-

RIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES

OR OTHER REMEDIES.

TRADEMARKS

Entone and the tagline“Connecting the Home”are trademarks of Entone, Inc. All other trademarks or

registered trademarks belong to their respective owners.

CHANGES

The material in this document is for information only and is subject to change without notice. While rea-

sonable eorts have been made in the preparation of this document to assure its accuracy, Entone, Inc.

assumes no liability resulting from the use of the information contained herein. Entone, Inc. reserves the

right to make changes in the product design without reservation and without notication to its users.

P/N: 99-709801-05 - V1.0

REMOTE CONTROL GUIDE EMEANOVA

Table of Contents

OVERVIEW

2 Remote Control

5 Controlling Your Devices

6 Program Remote to Control Your Devices

7 Auto Search Procedures

8 Setup Keys Punch Through Procedures

8 Reset Punch Through Procedures

8 Reset Procedures

POWERING UP

9 Setting up Remote Control

APPENDIX

10 Troubleshooting

11 Device Codes: Audio-Amplier

11 Device Codes: Audio-Accessory

12 Device Codes: Audio-Receiver

15 Device Codes: Television

31 Device Codes: Video-DVD

40 Declaration of Conformity

REMOTE CONTROL GUIDE EMEA NOVA

OVERVIEW REMOTE CONTROL

REMOTE CONTROL GUIDE EMEANOVA

Availability of certain features is dependent on your service provider

Button(s) Description

POWER Switches the power on/o for the currently selected device

Switches STB to power on or standby mode

SET UP Set up remote for TV

TV/ INPUT Changes the current A/V input of the selected device

programmed (i.e. TV or AUX)

DEVICE

CONTROL

TV: Select to control TV (if programmed)

STB: This button is pre-programmed to control the Entone

device

DVD: Select to control DVD (if programmed)

AUX: Select to control another device (if programmed)

TRANSPORT

KEYS

Controls video program for LIVE TV / DVR / VOD

REPLAY: Goes back approx. 30 seconds

REW: Rewinds video

FF: Fast forwards video

SKIP: Advances ahead in 30 second increments

PAUSE: Pauses video

PLAY: Plays video or resumes a paused program

STOP: Stops playback of video

REC Starts or stops recordin g a program

OPTIONS Provides additional options for certain on-screen menu or

highlighted item*

8MENU Displays on-screen menu or home screen

9INFO Displays on-screen information about the current

TV / VOD / DVR program

10 BACK Goes back one level within menus *

11 NAVIGATION ARROW KEYS: Navigates within the on-screen guide/menus

OK: Executes the currently selected menu option

LEFT/RIGHT: Rewinds/Fast forwards video

12 VOD Feature enabled by your service provider (contact service

provider for details)

13 EXIT Exits the current menu item or back to LIVE TV

14 GUIDE Displays the on-screen program guide

REMOTE CONTROL GUIDE EMEA NOVA

4Availability of certain features is dependent on your service provider

Button(s) Description

15 SHORTCUT Color-code buttons correspond to features that are enabled

by your service provider (contact service provider for

details)

16 LAST Changes channel to the previously viewed channel

17 CH/PG Changes channel up/down or pages up/down within the

on-screen program guide

18 VOL + /- Increases or decreases TV volume

19 MUTE Turns TV volume on/o

20 NUMBER

KEYS

Allows direct access to specic channels and menu items

21 TT Toggles Teletext on/o

22 DOT Used when entering a period in certain channels

Displays on-screen keyboard for certain applications

23 MEDIA Feature enabled by your service provider (contact service

provider for details)

24 LIVE TV Feature enabled by your service provider (contact service

provider for details)

25 DVR Feature enabled by your service provider (contact service

provider for details)

REMOTE CONTROL GUIDE EMEANOVA

CONTROLLING YOUR DEVICES

The Nova remote control can be used to control other devices

(e.g. TV) as well. It uses InfraRed (IR) light signals to control

other devices. IR signals travel only short distances (10 meters

or less), and cannot go through walls or other solid objects.

You must point the remote directly at these devices, with no

objects blocking the line of sight.

10 m or 40 ft

REMOTE CONTROL GUIDE EMEA NOVA

PROGRAM REMOTE TO CONTROL YOUR DEVICES

You can program the Nova to control other devices by

1. Locate the device code for your device in the Device Codes

table provided in the Appendix starting on page 11. If

you cannot nd the device code for your device or it does

not work after trying the listed device codes for your de-

vice brand, then you can try the auto search on page 7.

2. Turn on your device.

3. On the remote control, press the Device Control key (TV /

STB / DVD / AUX) to choose the device mode.

4. Press and hold the “SETUP” key until the LED light blinks

twice.

5. Enter the ve-digit device code for your device. If you

perform this procedure correctly, the LED will brink twice.

Otherwise, it has a long blink.

6. Press “Power” key. If your device turns o, setup is com-

plete.

7. If your device does not turn o, repeat this procedure us-

ing the next code for your device brand.

Record working codes here

TV code

DVD code

AUX code

REMOTE CONTROL GUIDE EMEANOVA

AUTO SEARCH PROCEDURES

If your device does not respond to the remote control after

trying all device codes listed for your brand, or if your brand is

not listed, try searching for your device code as follows:

1. Turn on your device.

2. On the remote control, press the corresponding Device

Control key (TV / DVD / AUX) to choose the device mode.

3. Press and hold the “SETUP” key until the LED light blinks

twice.

4. Press number keys “9” - “9” - “1”.

5. Press “Power” key.

6. Press “CH +”key repeatedly until your device turns o.

7. Press and hold “SETUP” key until LED blinks twice to save

the working code.

REMOTE CONTROL GUIDE EMEA NOVA

KEYS PUNCH THROUGH SETUP PROCEDURES

By default, a key pressed on the remote control is sent to the

selected device mode only. The punch through function al-

lows specic keys to be sent to a particular device. (For exam-

ple, the volume +/- key may need to be sent to the AUX device

instead of the TV).

1. On the remote control, press and hold the “SETUP” key

until the LED blinks twice.

2. Press number keys “9” - “7” - “8”.

3. Press source device mode, e.g. TV.

4. Press keys to punch through, e.g. VOL + / -, MUTE.

5. Press target device modes, e.g. STB, DVD.

6. Press and hold the “SETUP” key until the LED blinks twice.

7. LED has a long blink in case of error.

RESET PUNCH THROUGH PROCEDURES

1. Press and hold the “SETUP” key until the LED blinks twice

2. Press keys “9” - “7” - “8”

3. Press and hold the “SETUP” key until the LED blinks twice.

4. LED has a long blink in case of error.

RESET PROCEDURES

1. Press and hold the “SETUP” key until the LED blinks twice

2. Press keys “9” - “7” - “7”

3. Press and hold the “SETUP” key until the LED blinks twice.

4. LED has a long blink in case of error.

Andere Handbücher für Nova

Inhaltsverzeichnis

Andere Entone Fernbedienung Handbücher

Entone

Entone URC 4 (EMEA Edition) Bedienungsanleitung

Entone

Entone v4 Series Bedienungsanleitung

Entone

Entone 3 mode Bedienungsanleitung

Entone

Entone URC plus Bedienungsanleitung

Entone

Entone Hydra Bedienungsanleitung

Entone

Entone remote Bedienungsanleitung

Entone

Entone GVTV Bedienungsanleitung

Entone

Entone Nova Bedienungsanleitung

Entone

Entone URC plus Bedienungsanleitung

Entone

Entone URC 4 Bedienungsanleitung

Entone

Entone Stylus Bedienungsanleitung

Entone

Entone URC 4 (US Edition) Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung