Entron EN7000-TS Bedienungsanleitung

EN7000-TS

Touch-screen

User Guide

This document demonstrates the use of the EN7000 touchscreen.

Please reference the EN7000 User Guide for further details of

parameters.

For firmware Versions 1.18 and 2.18

EN7000-TS touch-screen User Guide

Document change record

Issue Date Comment

1.12 27/8/19 Toroid test added.

1.13 11/9/19 Added C-Monitor.

1.14 16/12/19 Added Analog control.

1.15 11/03/20 Added Toroid factor parameter. Added Retry feature

1.16 20/7/20 Added 0V parameter to CCR calibration for analog control mode

1.18 14/9/20 Changed description of 2

-stage once/every configuration parameter

EN7000-TS touch-screen User Guide

Table of Contents

Section Page

1. How to use the touch-screen....................................................................................... 5

1.1. Start-up.................................................................................................................... 5

1.2. Menu screen........................................................................................................... 6

1.3. Status screen........................................................................................................... 7

2. Editing parameters........................................................................................................ 8

2.1. Numeric................................................................................................................... 8

2.2. Radio button........................................................................................................... 9

2.3. Multi-option............................................................................................................. 9

2.4. Check box............................................................................................................... 9

3. Menus ........................................................................................................................... 10

3.1. Use Program (parameter)................................................................................... 11

3.2. Program menu...................................................................................................... 11

3.2.1. Program (parameter)................................................................................... 11

3.2.2. Link to program (parameter)....................................................................... 11

3.2.3. Electrode (parameter)................................................................................. 11

3.2.4. Timing menu .................................................................................................. 12

3.2.5. Current menu ................................................................................................ 14

3.2.6. Force menu.................................................................................................... 16

3.2.7. Valves menu.................................................................................................. 18

3.2.8. Options menu................................................................................................ 20

3.2.9. Copy program............................................................................................... 21

3.2.10. START button.................................................................................................. 21

3.3. Electrode menu.................................................................................................... 22

3.3.1. Edit Electrode (parameter).......................................................................... 22

3.3.2. SCR/Transformer (parameter)...................................................................... 22

3.3.3. Counter menu............................................................................................... 23

3.3.4. Stepper menu................................................................................................ 24

3.3.5. Current calibration menu............................................................................. 27

3.3.6. Force calibration menu................................................................................ 29

3.3.7. Copy electrode............................................................................................. 29

3.4. History Log menu.................................................................................................. 30

EN7000-TS touch-screen User Guide

3.4.1. Records in log................................................................................................ 30

3.4.2. Clear log ........................................................................................................ 30

3.4.3. View log ......................................................................................................... 30

3.5. Configure menu................................................................................................... 31

3.5.1. Features (parameter)................................................................................... 32

3.5.2. Weld type(parameter)................................................................................. 32

3.5.3. Sensor (parameter)....................................................................................... 32

3.5.4. Toroid test (parameter) ................................................................................ 32

3.5.5. Frequency (parameter) ............................................................................... 32

3.5.6. Units (parameter).......................................................................................... 32

3.5.7. Program select (parameter)........................................................................ 32

3.5.8. Electrodes (parameter)................................................................................ 32

3.5.9. SCR Select (parameter) ............................................................................... 32

3.5.10. 2

Stage (1) (parameter)............................................................................ 32

3.5.11. 2

Stage (2) (parameter)............................................................................ 33

3.5.12. Retract (parameter)..................................................................................... 33

3.5.13. Stop on fault (parameter)............................................................................ 33

3.5.14. EOS on fault (parameter)............................................................................. 33

3.5.15. Headlock on fault (parameter)................................................................... 33

3.5.16. I/O Source (parameter) ............................................................................... 33

3.5.17. Analog control (parameter)....................................................................... 33

3.5.18. Analog output (parameter)......................................................................... 34

3.5.19. Waveform 10V= (parameter)...................................................................... 34

3.5.20. Contactor (parameter)................................................................................ 34

3.5.21. Clock menu................................................................................................... 34

3.5.22. COM0............................................................................................................. 34

3.5.23. COM1............................................................................................................. 34

3.5.24. COM2 menu.................................................................................................. 34

3.5.25. COM3............................................................................................................. 34

3.5.26. Initialise button............................................................................................... 35

3.5.27. Restart button................................................................................................ 35

3.5.28. EXP(E/IP) or Ethernet button....................................................................... 35

3.5.28.1. IP address [0 to 3] (parameters) .............................................................. 35

3.5.28.2. Sub-net mask [0 to 3] (parameters)......................................................... 35

EN7000-TS touch-screen User Guide

3.5.28.3. Gateway [0 to 3] (parameters) ............................................................... 35

3.5.28.4. COM4 ......................................................................................................... 35

3.5.28.5. COM5 ......................................................................................................... 35

3.5.28.6. COM6 ......................................................................................................... 36

3.5.28.7. MAC ID ....................................................................................................... 36

3.6. Discrete I/O status................................................................................................ 36

3.7. Bus I/O status......................................................................................................... 37

3.8. Analog I/O status ................................................................................................. 38

3.9. System information............................................................................................... 38

4. Quick start .................................................................................................................... 39

4.1. Wire the discrete I/O............................................................................................ 39

4.2. Access the Main menu........................................................................................ 40

4.3. Access the Configuration menu ........................................................................ 40

4.3.1. Set the configuration parameters............................................................... 41

4.4. Access the Main menu........................................................................................ 41

4.5. Edit the Use Program parameter........................................................................ 42

4.6. Access the Program menu ................................................................................. 42

4.6.1. Select Program 0........................................................................................... 42

4.7. Access the Options menu................................................................................... 43

4.7.1. Assign options................................................................................................ 43

4.8. Access the Current menu ................................................................................... 44

4.8.1. Assign the current parameters .................................................................... 44

4.9. Access the Timing menu ..................................................................................... 44

4.9.1. Assign the time values.................................................................................. 45

4.10. Access the Electrode menu............................................................................ 45

4.10.1. Access the current calibration screen ....................................................... 46

4.10.2. Set the current calibration parameters...................................................... 46

4.11. We’re ready to weld!....................................................................................... 46

EN7000-TS touch-screen User Guide

Not all parameters are visible at any

one time. Many parameters are

dependent on other parameters. Only

relevant parameters are displayed as

this reduces clutter on the screen. The

screens shown here are typical and

may not be exactly what you will see.

1. How to use the touch-screen

1.1. Start-up

On Start-up, the display will show the splash screen.



Proceed to the Main

Menu by tapping the Home icon (bottom right).

EN7000-TS touch-screen User Guide

1.2. Menu screen

The items described below are common to every menu screen.

UseProgram DiscreteI/O

HistoryLog System

Program BusI/O

Electrode AnalogI/O

MainMenu

Tapping the iin the center of the banner will display the

tatus screen.

Tapping it from the

tatus

screen will return to the previous screen.

Tapping the Home icon will return to the previous screen.

Tapping the UP arrow scrolls the display up one line at a time.

The size of the scroll bar handle indicates how many additional items

there are in the menu. The smaller the handle, the more items there are

in the entire menu to be displayed.

Tapping the blue area in the scroll bar will scroll the display up or down

one page at a time.

Tapping the DOWN arrow scrolls the display down one line at a time.

The remaining area is divided up into eight labeled buttons. Tapping one of

these buttons will either

 Open the sub-menu for that function.

 Open an information window.

 If the button contains a parameter, edit that parameter.

EN7000-TS touch-screen User Guide

1.3. Status screen

This screen presents useful information regarding the status of the

control and the measurements from the last weld. Access the Status

screen by tapping on the iicon on the banner of any menu.

Conduction

35.5%

2.00kA

5.00kA

1.00kA

Pre‐heat

Ma i nHe a t

Ready

Pos t‐he a t

Progra m 2

Force 100lb

Status

1 This field displays the control status. Tapping on this

field will display a message screen giving the option

to reset the status.

2 Pre-heat current from the last weld

3 Main heat current from the last weld

4 Post-heat current from the last weld (Extended

Features must be enabled in the Configuration

menu)

5 Program used for the last weld

6 Force measured from the last weld

7 Percent Conduction of the SCR from the last weld

 Tap the i in the centre of the banner to return to the previous screen.

 Tap the HOME key to go to the main menu

EN7000-TS touch-screen User Guide

2. Editing parameters

Parameters can be edited in several different ways, depending upon their nature.

2.1. Numeric

When you tap on a button showing a numeric parameter, an editor window

opens:

e.g.

1 Present value of parameter

2 Use the keypad to enter a new value

3 Cancel the entry (present value remains unchanged)

4 Backspace the value in field 1

5 Enter the selected value (parameter is changed to new value)

 Initially, the present value is shown. In the above example the parameter

called Use Program is set to the value 2.

 Tap on the numeric buttons to enter a new value, then tap the green tick

key. The editor will close and return to the previous screen, showing the

new value entered.

 If you enter an illegal value, a warning message appears and the

parameter is not changed. Close the warning message by taping on the

red X key in the top right corner.

EN7000-TS touch-screen User Guide

2.2. Radio button

This type of parameter has only two options.

e.g.

Standard Extended

Features

 The presently selected option is highlighted. In the above example the

parameter called Features is set to Standard.

 Each time you tap on the button, the parameter is set to the other option.

2.3. Multi-option

This type of parameter has more than two options.

e.g.

I/OSource

DISCRETE

 The presently selected option is shown. In the above example the

parameter called I/O source is set to DISCRETE.

 Each time you tap on the button the parameter will change to the next

option in the list. After the final option, the list starts again with the first

option.

2.4. Check box

This type of parameter is either on (box ticked) or off (box clear).

e.g.

Stop

onFault

 In the above example the parameter called ‘Stop on fault’ is on.

 Each time you tap on the button the parameter toggles between on (box

ticked) and off (box clear).

Andere Handbücher für EN7000-TS

Inhaltsverzeichnis

Andere Entron Touch-Screen Handbücher

Entron

Entron EN7000-TS Bedienungsanleitung

Beliebte Touch-Screen Handbücher anderer Marken

Elecro Engineering

Elecro Engineering Poolsmart Plus Montageanleitung

Johnson Controls

Johnson Controls IQ4 HUB Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET2270L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET1002L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 3201L Bedienungsanleitung

Duratec

Duratec S15 Bedienungsanleitung

Crestron

Crestron TPMC-3SM Bedienungsanleitung

Racelogic

Racelogic MFD Touch Bedienungsanleitung

J2 580 Benutzerhandbuch

HAI

HAI OmniTouch 10p Bedienungsanleitung

panel

panel PC PSR108-FM Series Bedienungsanleitung

Tipro

Tipro FREE+ Bedienungsanleitung

Systemline

Systemline Commander Bedienungsanleitung

Interactive Technologies

Interactive Technologies Insite Bedienungsanleitung

GVision

GVision Legacy Bedienungsanleitung

BeiJer

BeiJer T21C-C24 Bedienungsanleitung

Advantech

Advantech ITM-5117 Series Bedienungsanleitung

Edge

Edge CS Bedienungsanleitung