Screen Seng
Restore to Default
When the Monitor is in monitoring or
talking state, Press Adjusticon to
enter screen seng page.Touch any item
you want,then touch to decrease
or increase the value.Sengs will be
performed immediately. Press icon to
exit out the page.
The restore to default funcon allows
the user to recover the sengs to factory
seng.Note that the restore to default
operaon will not change the me seng
and the datas on buit-in memory or SD
card.
Enter main menu page, then touch
User Setupicon to enter the seng
page, press Restore to default item, the
default sengs will be loaded. press
Home icon to return to home screen page.
5
Brightness
color
scene
Talk Volume
Adjust Return
Adjust - Adjust +
Door Station
Call tone
Intercom
Call tone
DoorBell
Call tone
Clock
Ring
Volume
Night Ring
Volume
Refault to
Default
Home
●Touch Installer setup
icon,a digital
keypad and installaon seng will be
showed on screen.
●Input code number by touching the
digital keypad.According to the le
instrucons, 8010 and 8011 are used
to set the unlock mode(0 and 1 ).
8021~8029 are used to set the unlock
me (1s~9s) .use to cancel the
input,and use to save the seng.
Touch icon to return last page .
Code Number:[----]
[0010]#:Remove all remote control
[0011]#:Add remote control
[8000]#:Set as master unit 0
[8001]#:Set as slaver unit 1
[8002]#:Set as slaver unit 2
[8003]#:Set as slaver unit 3
[8004]#:Set as guard unit
[8005]#:Set as not guard unit
[8010]#:Set lock mode to 0
[8011]#:Set lock mode to 1
[8021]#:Set the lock time of 1s
[8022]#:Set the lock time of 2s
[8023]#:Set the lock time of 3s
[8024]#:Set the lock time of 4s
[8025]#:Set the lock time of 5s
[8026]#:Set the lock time of 6s
[8027]#:Set the lock time of 7s
[8028]#:Set the lock time of 8s
[8029]#:Set the lock time of 9s
1
4
78
0
9
6
5
23
Cancel
Installation settings:
-6-
5. Built-in Memory and SD Card
This Monitor has been equipped with a built-in memory (about 120 MB) together with a
SD card reader. Maximum 16 GB SD card can be supported.
●The monitor can play photos and pictures.
●Photo frame funcon, each photo playing will last 5 seconds, More pictures in the
SD card, longer me for triggering the funcon, 800 pictures are supported in inner
memory. With 2G SD card, more than 30000 pictures can be supported.
●Must use T-views album soware tool to transform the JPG format photos took by
digital camera to TVS format photos that can be viewed on Monitor.
●The captured pictures will be saved in a folder named by date, note that the pictures
recording every day will be saved in different folders which automacally generated
every day.
●The captured pictures in the built-in memory can be copied to the SD card, and you
should use T-views memo soware tool to convert the pictures to JPG format that can
be seen on the computer. (select the pictures (press Ctrl+A to select all)->> click the
right key of the mouse ->>choose transfer selected to JPG item->>save the pictures on
computer)
●When the built-in memory is full, the oldest picture will be deleted to make room for
new record.
●The built-in memory can be formaed by the Monitor, but SD card cannot, you should
format the SD card on computer.
●Avoid to plug in/out the SD card when the monitor is under operaon.
●Playing will be interrupted by the calling from outdoor staon.
Micro SD card
-7-
03/15/2011 Fri.10:12 AM
