Enviro Cube Handbuch

CubeUnpacking&SetupInstructions

Contents

• Black sea ember wool (x1)

• Rear Vent Top Cover (x1)

• Unpacking & Setup Guide

(x1)

1. Remove the crate and packaging from the

unit. The unit is attached to the pallet and

will be removed at a later step.

Figure 1: Safety Screen Removal

Figure 2: Back Cover Removal

3. The rear panel is attached to the unit using

four (4) #8 T20 screws, two (2) on each side

near the back of the unit. Detach these

screws and remove the back panel. Refer to

Figure 2.

2. Remove the safety screen from the front of

the unit. Lift the screen up to disengage the

hooks and pull away from the unit. Refer to

Figure 1.

4. Lift the top cover up and o of the unit

(see Figure 3).

Figure 3: Top Plate Removal

5. Remove the front glass by lifting up to

disengage the hooks and pull away from

the unit. Refer to Figure 4.

Figure 4: Outer Glass Removal

6. Each of the side panels can now be

removed. Lift the panel up and away

from the unit. Refer to Figure 5.

Figure 5: Side Panel Removal

Figure 6: Unit Removal

7. The Cube is attached to the pallet via two

brackets at the bottom of the unit. Detach the

unit from these brackets by removing the four

(4) #8 HEX screws, two on each side. Lift the

unit up and place it off to the side for now.

Refer to Figure 6.

8. Remove the wood screws securing the brack-

ets to the pallet.

*NOTE: The next steps apply to both the pedes-

tal and platform options for the Cube. The shown

diagrams will use the pedestal as an example.

*NOTE: If you are planning to install the optional

fan kit, please complete everything up to wiring

the fan kit before continuing. The fan kit installa-

tion instructions are included with the fan kit.

*NOTE: If converting the Cube to a rear vented unit, unscrew the four (4) hex head bolts securing

the intake/exhaust adapter, rotate it 180º, and reat-tach.

*NOTE: If you are installing the optional fan kit, finish the remaining instructions (wiring the fan

kit) before continuing.

9. Place two brackets on the table and line up

the holes on the bracket to the table. Use four

(4) #8 T20 Screws to fasten. (Figure 7)

10. Retrieve the Cube unit and align it over the

brackets on the pedestal/platform. It will use the

same holes that the brackets were previously

attached to. Secure the unit to the pedestal as

shown in Figure 7.

11. The Cube is now properly secured to the

pedestal/platform. perform steps 2 through 6 in

reverse order to reattach all outer pieces of the

unit. Figure 7: Unit Attachment

Andere Handbücher für Cube

Inhaltsverzeichnis

Andere Enviro Kamin im Innenbereich Handbücher

Enviro

Enviro Westley-820 Bedienungsanleitung

Enviro

Enviro Nova Q1L Bedienungsanleitung

Enviro

Enviro Q2L Nova Bedienungsanleitung

Enviro

Enviro G50GID Bedienungsanleitung

Enviro

Enviro Cara Bedienungsanleitung

Enviro

Enviro Q1LI Bedienungsanleitung

Enviro

Enviro Vented EG 28 B Bedienungsanleitung

Enviro

Enviro S40 Bedienungsanleitung

Enviro

Enviro S20I Bedienungsanleitung

Enviro

Enviro G42LI Bedienungsanleitung

Enviro

Enviro DV42DX Bedienungsanleitung

Enviro

Enviro retreat Bedienungsanleitung

Enviro

Enviro Q2L Nova Bedienungsanleitung

Enviro

Enviro C-10365 Bedienungsanleitung

Enviro

Enviro C60I Bedienungsanleitung

Enviro

Enviro DV36 Bedienungsanleitung

Enviro

Enviro Q2LI Bedienungsanleitung

Enviro

Enviro Westport Bedienungsanleitung

Enviro

Enviro G39L Bedienungsanleitung

Enviro

Enviro Westport-Cast Bedienungsanleitung

Enviro

Enviro DRIFTWOOD E33 Bedienungsanleitung

Enviro

Enviro FOCUS EG31-118 Bedienungsanleitung

Enviro

Enviro 50-645 Bedienungsanleitung

Enviro

Enviro EG40-070 Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch