Envision EN7410 Bedienungsanleitung
EN7410
17” TFT LCD Monitor
User’s Manual
By Envision Peripherals
Inc.
www.ENVISIONdisplay.com
i
FOR YOUR SAFETY
Before operating the monitor, please read this manual thoroughly. This manual
should be retained for future reference.
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
As an ENERGY STAR®Partner Envision Peripherals Inc. has determined
that this product meets the ENERGY STAR®guidelines for energy efficiency.
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture.
Dangerously high voltages are present inside the monitor. Do not open the cabinet.
Refer servicing to qualified personnel only.
ii
PRECAUTIONS:
• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen
sink, laundry tub, swimming pool or in a wet basement.
• Do not place the monitor on an unstable cart, stand, or table. If the monitor
falls, it can injure a person and cause serious damage to the appliance. Use
only a cart or stand recommended by the manufacturer or sold with the
monitor. If you mount the monitor on a wall or shelf, use a mounting kit
approved by the manufacturer and follow the kit instructions.
• Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of the monitor and to protect it from
overheating, be sure these openings are not blocked or covered. Do not
place the monitor on a bed, sofa, rug, or similar surface. Do not place the
monitor near or over a radiator or heat register. Do not place the monitor in a
bookcase or cabinet unless proper ventilation is provided.
• Do not install the monitor in a location near heat sources such as radiators or
air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
• The monitor is equipped with a three-pronged grounded plug, a plug with a
third (grounding) pin. This plug will fit only into a grounded power outlet as a
safety feature. If your outlet does not accommodate the three-wire plug,
have an electrician install the correct outlet or ground the appliance safely.
Do not defeat the safety purpose of the grounded plug.
• Unplug the unit during a lightning storm or when it will not be used for long
period of time. This will protect the monitor from damage due to power
surges.
• Do not overload power strips and extension cords. Overloading can result in
fire or electric shock.
• Never push any object into the slot on the monitor cabinet. It could short
iii
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
• Do not attempt to service the monitor by yourself. Opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.
• Do not pull or bend the power cable and signal cable or place the monitor or
any heavy objects on the cables. If the cables are damaged, they may cause
fire or electric shock.
• If you notice any abnormal phenomenon such as strange noise, smoke or
smells, unplug the monitor and contact your dealer or the nearest service
center immediately.
• When moving the monitor, always turn off the switch, unplug the monitor,
and disconnect the signal cable. If the cables are not properly disconnected
when moving the monitor, it may cause fire or electric shock.
• Do not touch the plug with wet hands. Pulling or inserting the plug with wet
hands may cause electric shock.
• To disconnect the power cable or signal cable, always pull the cable by the
plug. Never pull on the cable as this may cause fire or electric shock.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100 - 240V AC, Min. 5A.
• The wall socket shall be installed near the equipment and shall be easily
accessible.
ERGONOMICS RECOMMENDATIONS
Do not operate the monitor in a dark room or against a bright background. For optimal
viewing comfort, the monitor should be just below eye level and 30-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged period of time, a
ten-minute-break per hour is recommended.
iv
GENERAL NOTES
The following symptoms are normal with LCD monitor and do not indicate a problem.
• Due to the nature of the fluorescent light, the screen may flicker during initial
use. Turn off the Power Switch and then turn it on again to make sure the
flicker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• The LCD panel used in this monitor is a very high technology product with
3,932,160 thin film transistors giving you fine picture details. Occasionally, a
few non-active pixels may appear on the screen as a fixed point of red,
green, blue, white or black. Please note that this does not indicate a
defective panel.
• Due to the nature of the LCD screen, an after-image of the previous screen
may remain after switching the image when the same image has been
displayed for a long time. The monitor will slowly recover from this.
• LCD monitors have a fixed size & number of pixels. Due to this, an
interpolation is necessary to operate the monitor in a resolution below its
native resolution which may slightly de-grade the display quality. Therefore,
it is highly recommended to operate this monitor at its native resolution of
1280x1024 @ 60Hz.
v
OTHER NOTES
• The screen surface is very soft. Do not rub, touch or tap the screen surface
with sharp object such as pen or pencil. This contact may scratch or
damage the screen. These damages are not covered under the warranty.
• Turn your computer OFF before installing your new monitor. Refer to your
computer manual for the proper shut down procedure.
• Save the original shipping carton and packing materials, as they will come in
handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed
at the factory.
• To keep the monitor looking new, periodically clean the case & surface of the
TFT-LCD panel with a soft non-fibrous cloth lightly dampened with a glass
cleaner. Do not use any paper products to clean the screen. Never spay the
glass cleaner directly on the monitor. Never use strong solvents such as
thinner, benzene, or abrasive cleaners, since these will damage the case &
panel. As a safety precaution, always unplug the monitor before cleaning it.
vi
Disclaimer
Envision Peripherals Inc. makes no representations or warranties, either expressed
or implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Further, Envision
Peripherals Inc. reserves the right to revise this publication and to make changes
from time to time in the contents hereof without obligation to notify any person of such
revision or changes.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
All other trademarks remain the property of their respective owners.
Reference Information
For future reference, write the following information about your monitor in
the space below. The serial number is found on the back of the product or
on the bottom of its stand.
Monitor Information
Product Name: EN7410
Serial Number:
Date of Purchase:
Dealer Information
Dealer:
Telephone
Number:
Address:
vii
Table of Contents
1
1Important Safety Instructions ...........................................i
2
2Features.............................................................................2
3
3Unpacking the Monitor.....................................................3
4Hardware Installation .......................................................4
5
5Windows driver installation .............................................5
6Setting the Display Resolution........................................6
Choosing the Best Resolution ............................. 6
Supported Graphics Modes and Refresh Rate
Selection.............................................................. 7
7
7Adjusting the Monitor..................................................9-12
8
8Frequently Asked Questions ....................................13-15
9
9Specifications ............................................................16-17
1
1
1
Important Safety Instructions
Please read the following safety instructions before installing or cleaning your
Envision monitor:
1. Unplug the monitor’s power cable from the wall outlet before cleaning. Do
not use liquid or aerosol cleaners. Use a soft cloth to clean the monitor
housing.
2. Slots and openings on the back or top of the cabinet are provided for
ventilation. They must not be blocked or covered. This product should
never be placed near or over a radiator or other heat source, or used in a
built-in installation unless proper ventilation is provided.
3. Never push objects of any kind, or spill liquid of any kind into this product.
4. Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltages or other hazards.
5. If any abnormal operation or accident (such as dropping the unit) occurs,
disconnect the monitor from the wall power outlet and contact qualified
service personnel.
2
2
2
Features
Your Envision EN7410 Monitor features:
♦ SXGA (1280 x 1024 pixel) Resolution LCD Panel
♦ High Brightness – 300 cd/m2(typical)
♦ High Contrast Ratio – 400:1 (typical)
♦ True Colour Display
With FRC support for 16.7M colours, the Envision EN7410 monitor offers
you better image quality.
♦ High Quality Expansion
With any resolution within the monitor’s specified range, your Envision
EN7410 monitor can expand the image to full screen.
♦ Auto Adjustment Function
The auto-adjustment key automatically optimises the image.
♦ Plug and Play Compatibility with Microsoft®Windows®95, 98, 2000,
Me and XP
♦ Space Saving - only 199 mm deep
♦ Light Weight - only 4.0 kg
♦ Lower Power Consumption
40 W maximum during operation
♦ Power Saving
Power management complies with EPA ENERGY STAR standard. When
the system is idle (in monitor off mode), the monitor automatically cuts its
power consumption to less than 1 W.
♦ On Screen Display
Allows you to adjust all settings simply using on-screen menus.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Envision Monitor Handbücher
Envision
Envision E218C1 Bedienungsanleitung
Envision
Envision EN-7500 Bedienungsanleitung
Envision
Envision EN7600 Bedienungsanleitung
Envision
Envision EN-7500 Bedienungsanleitung
Envision
Envision H962w Bedienungsanleitung
Envision
Envision EN9250 Bedienungsanleitung
Envision
Envision G2460w Bedienungsanleitung
Envision
Envision G2219W1 Bedienungsanleitung
Envision
Envision Envision H1781 Bedienungsanleitung
Envision
Envision EN9600 Bedienungsanleitung
Envision
Envision G2470 Bedienungsanleitung
Envision
Envision EN-8100e Bedienungsanleitung
Envision
Envision EN-7100e Bedienungsanleitung
Envision
Envision G218a1 Bedienungsanleitung
Envision
Envision G917w1 Bedienungsanleitung
Envision
Envision EN7400e Bedienungsanleitung
Envision
Envision G917w Bedienungsanleitung
Envision
Envision EN9410e Bedienungsanleitung
Envision
Envision H716a4 Bedienungsanleitung
Envision
Envision G2016wa Bedienungsanleitung
