EOS SBM GLT KNX Bedienungsanleitung

Druck-Nr.: 2934 5021

Stand: 1.1/2019

Made in Germany

SBM GLT KNX

KNX Home-Modul for

building management systems

Installation and Operating Instructions

2 Installation and Operating Instructions - KNX Home-Modul

Documentation

Manufacturer

Original installation instructions EN

EOS Saunatechnik GmbH.

The copying and distribution of this document, as well as the use and com-

munication of its contents without express authorization, are not permit-

ted. Compensation will be claimed in the event of infringements.

utility patent.

Characters, symbols and illustrations

Revision history

EOS Saunatechnik GmbH

Schneiderstriesch 1

35759 Driedorf, Germany

Tel. +49 2775 82-0

Fax +49 2775 82-431

Web www.eos-sauna.com

Additional information about an operating step

Cross-reference to a page

Read instructions

Result of a step

Table title

Title of figure

Date Version Description

January 1st 2019 01.00 First version

March 2019 01.10 Safety instructions added

KNX Home-Modul - Installation and Operating Instructions 3

Contents

Documentation......................................................................................................... 2

1 General safety instructions................................................................................. 4

1.1 Safety levels....................................................................................................... 4

1.2 Mounting and electrical installation ........................................................5

1.3 Operator instruction ...................................................................................... 5

1.4 Standards and regulations ..........................................................................7

2 Identification .............................................................................................................8

2.1 Unit specifications .........................................................................................8

2.2 Intended use.....................................................................................................9

3 Description of the unit ........................................................................................10

3.1 Housing ............................................................................................................11

3.2 Communication functions.........................................................................12

3.3 Sample installation.......................................................................................13

3.4 Circuit boards .................................................................................................14

4 Mounting and electrical installation............................................................15

4.1 Mounting the KNX Home-Modul ............................................................15

4.2 Connecting the KNX Home-Modul with the S bus ...........................17

4.2.1 Connecting the S bus cable to the relay box or module18

4.3 Configuring addresses for multi-cabin installations ........................20

4.4 KNX programming........................................................................................21

4.5 Emotec, EmoStyle, EmoStyle i, Emotec IR, InfraStyle, InfraStyle i

data communication ...................................................................................21

4.6 EmoTouch 3 data communication .........................................................24

5 General terms and conditions of service ...................................................26

6Disposal......................................................................................................................29

4 Installation and Operating Instructions - KNX Home-Modul

General safety instructions

1.1 Safety levels

Safety instructions and important operating instructions are clas-

sified according to ANSI Z535.6. Please familiarise yourself with the

following terms and symbols:

DANGER

Danger

Indicates a hazardous situation which, if not avoided, will result in

death.

WARNING

Warning

Indicates a hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION

Caution

Indicates a hazardous situation which, if not avoided, could result

in minor or moderate injury.

NOTICE

Notice

Indicates a hazardous situation which, if not avoided, will result in

damage to the unit.

KNX Home-Modul - Installation and Operating Instructions 5

General safety instructions

1.2 Mounting and electrical installation

These installation instructions are intended for qualified person-

nel familiar with the laws and regulations applicable to electrical

installations at the installation site. Observe the following general

safety instructions during mounting, configuration and commis-

sioning of the product.

Refer also to the installation instructions for the units to which you

connect the KNX Home-Modul. See also:

2.2 Intended use, 9

Risk to life and limb

and risk of fire

Risk to life and limb from electric shock and fire in the event of im-

proper or faulty electrical connection. This risk also applies follow-

ing completion of the installation work.

The electrical installation of the relay box and other electrical

systems or equipment with a fixed mains connection must only

be performed by a trained electrician from an authorised elec-

trical company.

Observe the stipulations in VDE 0100 part 701.

The system must be disconnected and removed entirely from

the mains supply before commencing installation and repair

work.

The housing cover must only be removed by a specialist.

Do not install control units, relay boxes and modules in en-

closed cabinets or wood panelling.

1.3 Operator instruction

During commissioning, the operator of the sauna cabin, infrared

cabin or steam room must be instructed in relation to the follow-

ing general safety instructions: The operator must be given a copy

of the instructions for use.

Risk of electric shock A risk to life and limb from electric shock and fire arises in the event

of improper repair work. This risk also applies after work is com-

pleted.

The housing cover must only be removed by a specialist.

Repairs and installations must only be performed by a trained

specialist.

The system must be disconnected and removed entirely from

the mains supply before commencing repair work.

Use only original spare parts from the manufacturer.

6 Installation and Operating Instructions - KNX Home-Modul

General safety instructions

Risk of burns and

chemical burns

Touching hot parts may lead to skin burns and chemical burns of

the skin.

The operator must be familiar with the unit’s hot parts and be

able to identify them.

The operator must be familiar with the settings for the heating

period and understand how it is controlled.

Health risks Spending time in a sauna cabin, infrared cabin or steam room can

lead to serious health risks or even death for persons with health

impairments.

Persons with health impairments must consult a doctor before

using a sauna cabin, infrared cabin or steam room.

Equipment damage

due to overuse

Excessive humidity in commercial sauna cabins, infrared cabins or

steam rooms can lead to property damage.

In a commercial sauna cabin, infrared cabin or steam room, the

heating period must be set so that the heating switches off au-

tomatically after a specific period of time.

If the heating does not switch off automatically after a defined

heating period, cabin use must be supervised at all times.

Inspect the cabin before each use.

Operation by

children or persons

with reduced mental

capacity

Children and persons with reduced mental capacity can be a risk.

Children must be supervised to ensure they do not play with

the unit.

Operation of a sauna cabin, infrared cabin or steam room must

not be started by children under 8 years of age.

The settings for the heating period must only be used by chil-

dren under 8 years of age if they are supervised by an adult.

Operation of a sauna cabin, infrared cabin or steam room must

not be started by persons with reduced mental capacity or lim-

ited physical or sensory abilities unless they are supervised or

unless they have already been instructed in its use and under-

stand the risks.

Children and persons who have not received proper instruction

must not clean or service the system.

KNX Home-Modul - Installation and Operating Instructions 7

General safety instructions

1.4 Standards and regulations

The following standards, in their currently applicable versions, were

observed during design and construction.

Local regulations also apply to the installation and operation of heating,

sauna, and steam room systems.

Standard Title

DIN EN 60335-1 Household and similar electrical appliances – Part 1: General requirements

DIN EN 60335-2-30 Household and similar electrical appliances – safety – Part 2-30: Particular require-

ments for room heaters

DIN EN 60335-2-53 Household and similar electrical appliances – safety – Part 2-53: Particular require-

ments for sauna heating appliances and infrared cabins

DIN EN 60335-2-96 Household and similar electrical appliances – safety – Part 2-96: Particular require-

ments for heating equipment

DIN EN 55014-1 Electromagnetic compatibility – Requirements for household appliances, electric

tools and similar apparatus – Part 1: Emission

DIN EN 55014-2 Electromagnetic compatibility – Requirements for household appliances, electric

tools and similar apparatus – Part 2: Immunity

8 Installation and Operating Instructions - KNX Home-Modul

Identification

The KNX sauna bus module for building management systems (SBM GLT

KNX), also referred to as the KNX Home module, is used to connect sauna

cabins, infrared cabins and steam rooms to a building management

system.

2.1 Unit specifications

Nameplate

The nameplate is attached to the front of the upper part of the housing.

Nameplate (example)

Requirements for operation and storage

The KNX Home module must only be mounted outside of sauna cabins,

infrared cabins and steam rooms. The mounting location must fulfil the fol-

lowing climate conditions:

Ambient temperature during operation -10°C to 40°C

Storage temperature -20°C to 60°C

A Name E Manufacturer

B Model F Protection class

C Item number G Manufacturing date

D Country of origin H Serial number

Saunabusmodul

Type SBM GLT KNX

Art.-Nr. 94 7078 00

Made in Germany

EOS-SAUNATECHNIK GmbH, 35759 Driedorf

S-No. 17.18 00001

IPX4

F G H

KNX Home-Modul - Installation and Operating Instructions 9

Identification

2.2 Intended use

The KNX Home module is intended to be connected to a building manage-

ment system. It serves to remotely control selected functions in sauna cab-

ins, infrared cabins and steam rooms.

The following control units support this control:

Emotec, Emotec IR (software release R. 3.44 or higher)

EmoStyle, InfraStyle (software release R. 3.44 or higher)

EmoStyle i, InfraStyle i (software release R. 3.44 or higher)

EmoTouch 3 (also SteamRock Premium, software release R. 2.08 or

higher)

Check the software release of your control unit. Perform an update if nec-

essary.

Foreseeable misuse

The following are considered instances of foreseeable misuse:

The connecting cables are connected incorrectly.

The cabin addresses are programmed incorrectly.

The unit is operated after technical or other modifications are made to

the relay box.

The unit is operated by children or persons with reduced mental capac-

ity or by persons who have not been thoroughly instructed in its use.

10 Installation and Operating Instructions - KNX Home-Modul

Description of the unit

The KNX Home module allows you to monitor and control cabin-control

functions using a building management system. This enables monitoring

of individual cabins or a complete multi-cabin installation.

In a multi-cabin installation, a KNX Home module is connected for each

cabin.

The KNX Home module transfers data between the sauna bus and the KNX

bus in both directions. Its use is configured using the building manage-

ment system. The KNX Home-Modul should be operated with software ver-

sion ETS5 or higher.

Scope of delivery

The SBM GLT KNX is encased in a plastic housing. The housing completely

encloses the circuit board and the electronics.

The following components are included in the scope of delivery:

KNX Home-Modul

Wood screws 4 x 25 mm

4 anchors

S bus cable 10 m, with 2 RJ12 plugs

Inhaltsverzeichnis

Andere EOS Steuereinheit Handbücher

EOS

EOS SBM-IR Modul Bedienungsanleitung

EOS

EOS ECON A2 Bedienungsanleitung

EOS

EOS ECON D2 Benutzerhandbuch

EOS

EOS Emotec D Bedienungsanleitung

EOS

EOS EmoTouch 3 Bedienungsanleitung

EOS

EOS EmoStyle Di Bedienungsanleitung

EOS

EOS ECON H2 Bedienungsanleitung

EOS

EOS EmoTouch II + Bedienungsanleitung

EOS

EOS EMOTEC DC 9000 Bedienungsanleitung

EOS

EOS SBM App Module Bedienungsanleitung

EOS

EOS EMOTEC L 09 Relay Bedienungsanleitung

EOS

EOS SBM-App Bedienungsanleitung

EOS

EOS ECON F1 Bedienungsanleitung

EOS

EOS EmoTouch 3 Bedienungsanleitung

EOS

EOS Infratec Classic Planungshandbuch

EOS

EOS Saunabus Soundmodul Series Bedienungsanleitung

EOS

EOS Emotec D Bedienungsanleitung

EOS

EOS InfraTec Premium Benutzerhandbuch

EOS

EOS ECON H4 Benutzerhandbuch

EOS

EOS EmoTec LSG 09R Planungshandbuch

EOS

EOS EMOTEC DC 9000 Bedienungsanleitung

EOS

EOS ECON D4 Stücklistenhandbuch

EOS

EOS EmoTouch 3 Bedienungsanleitung

EOS

EOS 94 00 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung