EOTech 512 Bedienungsanleitung
1
512™
HWS®(HOLOGRAPHIC WEAPON SIGHT)
THIS PAGE WAS LEFT BLANK INTENTIONALLY
3EOTECHINC.COM /
Contents
1 /SHOW SOME RESPECT
Distribution Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2 /THE BASICS
General Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Key Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Reticle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Anatomy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3 /GET STARTED
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting the HWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Battery Recommendations
Replacing the Battery
Electronic Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Windage and Elevation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Zeroing Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4 /MAINTENANCE
Cleaning Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operator Level Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
5 /NEED SOME HELP?
Service and Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Replacement Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4/ 512
1/ SHOW SOME RESPECT
Distribution Statement
Approved for public release; distribution is unlimited.
This commodity is controlled under the Export Administration Regulations (EAR),
ECCN 0A504.b, and may not be exported to a Foreign Person, either U.S. or abroad,
without a license or exception from the U.S. Department of Commerce.
Warnings
Weapon Safety
Prior to mounting the HWS on your weapon, be sure the weapon is cleared.
If you are not sure how to clear your weapon, please see the operator’s manual
that accompanied the weapon platform you are mounting the sight on.
Laser Safety
The HWS is a Class I laser product. The illuminating beam
can become accessible to the eye if the housing is broken.
Turn the sight off immediately and return the broken unit
to the factory for repair.
FCC Compliance
The HWS complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation. Complies with 21 CFR Chapter 1, Subchapter J.
5/ 512 EOTECHINC.COM /
SHOW SOME RESPECT / 1
Caution
Never disassemble the sight’s optical assembly. The optical cavity is purged,
nitrogen filled, and sealed to achieve fog-resistant performance. Disassembly
will void the warranty and render the sight inoperable.
When a sudden increase in resistance is felt in the elevation or windage
adjustment shafts, the end of the adjustment range has been reached. DO NOT
TURN THE ADJUSTMENTS ANY FARTHER OR SERIOUS DAMAGE MAY OCCUR
TO THE SIGHT.
Always dampen the glass surfaces prior to cleaning. Never clean the glass
surface with a dry cloth or paper towel.
All moving parts of the sight are permanently lubricated. Do not try to
lubricate them.
Do not use deteriorated or corroded batteries. Inspect batteries for rips, tears,
dents, or cuts in the battery housing. If there is any exposed internal content of
the battery, it could affect the operation of the sight.
The 512 HWS units are designed to mount directly to either a 1" (25.4mm)
Weaver or MIL-STD-1913 rail specification.
2/ THE BASICS
6/ 512
General Info
This manual is an overview of the 512 HWS (Holographic Weapon Sight), and will
define basic operation, features/benefits, and options of this proprietary optical
system. The HWS is a state of-the-art optical sighting system for small to medium
caliber weaponry and launching type platforms. The HWS utilizes holographic optics
fabrication technology that is used in the production of advanced heads-up display in
attack fighter aircraft for targeting, gauge reading, weapon system verification, etc.
EOTECH®has miniaturized the sophisticated sighting heads-up display system into a
compact and rugged package for use on small arms and other weapon platforms.
THE BASICS / 2
7/ 512 EOTECHINC.COM /
Key Attributes
The 512 HWS is a lightweight, non-magnifying, optical sight designed for close-to-
midrange engagements. It allows for very fast target acquisition and engagement at
short ranges while providing aiming capability out to 300 meters, equal to or better
than iron sights.
The major combat advantage of the HWS is extremely rapid reticle-on-target
acquisition. As quickly as a target is identified, the holographic reticle can be
superimposed on the target. The sight allows operators to maintain eye contact on
the target and to place the holographic reticle onto the target without shifting focus.
Operators can quickly acquire the target and reticle in the same focal plane for fast
and accurate shot placement.
The HWS appears to project the holographic image of a reticle on the target plane.
The sight can be used as a bright open reticle image or a fine dot. The heads-up
display window allows an undistorted and unrestricted view of the target.
The HWS offers extremely fast target acquisition in Close-Quarters Battle (CQB)
using the large ring, and aiming precision in longer range engagements (using the
MOA Dot) without obscuring the target.
Another advantage of the HWS is the full field of view which allows the operator
better situational awareness. The HWS employs a true heads-up display (HUD)
window that eliminates blind spots and constricted or tunnel vision associated with
scope sights. Controls are inset into the HWS housing with no protruding knobs,
battery compartments, or rings obscuring the target. Utilizing natural binocular vision
is an advantage of this sighting system, as well as additional threat identification
through increased operator situational awareness and peripheral vision.
The primary use of the HWS is for the M4A1 carbine and CQBR in Close-Quarters
Battle. The HWS is not however, limited to carbines. The HWS can also be used on
medium caliber machine guns, grenade launchers, bolt guns, crossbows, MSR and
similar platforms, and less than lethal projectile launchers. The sight provides a 1X
(no magnification) sight picture and is not designed as a long range sight system;
however, it can be used as effectively as iron sights on targets to 300 meters.
The advantage of the HWS is that it provides the operator superior shooting
performance, rapid reticle-on-target acquisition, full field of view and accurate shot
placement. The HWS can be naturally deployed by all levels of users, from novice to
the most highly trained operator.
2/ THE BASICS
8/ 512
Reticle
HWS RETICLE ADVANTAGE
EOTECH’s Holographic technology provides a distinct advantage over typical red
dots. EOTECH can offer any type of reticle pattern, as opposed to being limited to
a single dot. EOTECH reticle designs are fabricated so that they can incorporate
multiple trajectory points of aim, range assist features, and anti-torque or cant visual
indicators.
HWS RETICLE PATTERN
EOTECH’s reticle patterns greatly impact accuracy and fast target acquisition.
EOTECH’s reticle patterns feature a 68 MOA ring surrounding a 1 MOA center dot,
allowing the shooter to quickly pick up a target; HWS allows for more complex
reticle designs with minimal parallax error.
0 RETICLE
The 68 MOA ring with 1 MOA dot is ideal for fast target
acquisition. It provides three usable aiming points. The
aiming points above were based on the following load:
.223 Cal. 62 Gr. 2,900 Vel. Other loads and calibers can
also be used, but the operator will have to establish the
ranges associated with the aiming points. When using a
shotgun, the 68 MOA ring can be used to represent shot
patterns, but will vary based on choke and shell selection.
50 yds.
and
200 yds.
7 yds.
THE BASICS / 2
9/ 512 EOTECHINC.COM /
Specifications
TECHNICAL SPECS
Optics Transmission holography
Magnification 1X
Eye Relief Unlimited
L × W × H 5.6" × 2" × 2.5" (142.2 × 50.8 × 63.5mm)
Weight 11.5 oz (326g)
Water Resistant 10 ft (3m) depth
Sealing Fog-resistant internal optics
Color/Finish Black
Adjustment (Per Click) Approx. 0.5 MOA [1/2" (12.7mm) at 100 yds. (91m)] when zeroing
Adjustment Range Range: +/- 40 MOA travel
Mount 1" Weaver or MIL-STD 1913 rail
DISPLAY WINDOW
Optical Surfaces Anti-reflection coating on external surfaces
Window Dimensions 1.20" × 0.85" (30 × 23mm)
Front Window Material Glass 1/8" (3.17mm) thick
Rear Window Material Laminate 3/16" (4.76mm) thick
FOV 100 Yds (91m) 30 yds. (28m) at a 3" eye relief
Reticle Option 0- 68 MOA circle with quadrant ticks with 1 MOA aiming dot
ELECTRICAL
Power Source 2 × 1.5 V AA batteries — Supports lithium, alkaline, or rechargeable
Battery Life Lithium: 2,500 continuous hours at nominal setting 12 at room temp.
Alkaline: 2,200 continuous hours at nominal setting 12 at room temp.
Brightness Settings 20 daylight settings
Auto Battery Check Indicator Flashing reticle upon start-up
Auto Shut-Down At 8 hrs – programmable to 4 hrs
2/ THE BASICS
10 / 512
Anatomy
Holographic
Window
Reticle
Elevation
Adjustment
Windage
Adjustment
Protective
Aluminum Hood
Locking
Cam Lever
Removable
Battery
Compartment
Universal
Mount
On/Off &
Brightness Buttons
Inhaltsverzeichnis
Andere EOTech Vergrößerungsglas Handbücher
Beliebte Vergrößerungsglas Handbücher anderer Marken
HIMS
HIMS SenseView DUO Bedienungsanleitung
nedis
nedis MAGL12WWT Bedienungsanleitung
Ryobi
Ryobi RML18-0 Bedienungsanleitung
Eschenbach
Eschenbach Visolux Digital XL FHD Bedienungsanleitung
ENHANCED VISION
ENHANCED VISION Merlin Bedienungsanleitung
Ash Technologies
Ash Technologies Andromeda Bedienungsanleitung
