Epever RC-10 Bedienungsanleitung
BEIJING EPSOLAR TECHNOLOGY CO., LTD. Tel：+86-10-82894112 / 82894962 Website：www.epsolarpv.com/www.epever.com
12
IR Remote Controller——RC-10
1. Overview
IR remote controller is an accessoriy which is compatible with Tracer LPLI
and LS LPLI series solar change controller. The function is to set the system
voltage, battery type, control parameters, working time and current of LED
lamp, etc, and view the working status of system and load test function. The
main features are:
Setting parameter via IR communication
One-key parameter sending, one-to-one setting
Compatible with the road solar controller
Dot matrix LCD display
Load test mode, detection system connection timely
2.Product Features
3.LCD Display
(1)Configuration Interface
Parameters
Setting range
Rated Volt
12V/24V
Rated Curr
0.10～6.00A,Step length 0.03A
Bat. Type
MnNiCo+/LiFe+/Flooded/Gel/Seal
MnNiCo+/LiFe+
Flooded/Gel/Seal
Intelligent
Intelligent
OFF/ON
UVWR★
UVWR★
9-17V, Step length 0.1V(12V)
18-34V, Step length 0.2V(24V)
UVW★
UVW★
Decrease★
Decrease★
0～100%,Step length 1%
Charge Temp★
--------
-40～10℃,Step length 1℃
Discharge Temp★
--------
-40～10℃,Step length1℃
OVD
OVD
9-17V, Step length 0.1V(12V)
18-34V, Step length 0.2V(24V)
CLV★
CLV★
OVR★
OVR★
--------
ECV★
BCV
BCV
--------
FCV
BVR★
BVR★
LVR
LVR
LVD
LVD
DLV★
DLV★
Boost Time
Boost Time
0～180M, Step length 10M
--------
EQV Time
Load Mode
ON/OFF/Mode1/Mode2/Mode3
ON/OFF
Mode1/2/3
--------
Time1-6
0～15H,Step length 1H
Rated Percent
Percent1-6
0～100%,Step length 10%
--------
AIpercent1-6▲
0～100%,Step length 10%
--------
AIholdTime▲
0～250S
★Thank you for selecting the IR Remote Controller(RC-10) which
is compatible with road solar controller. Please read this manual
carefully before using the RC-10
※在使用本产品之前，请仔细阅读本产品说明书。
BEIJING EPSOLAR TECHNOLOGY CO., LTD. Tel：+86-10-82894112 / 82894962 Website：www.epsolarpv.com/www.epever.com
34
--------
Delay Time★
0～60M,Step length 1M
--------
Delay Volt★
0～9V, Step length 1V
★when User Switch the "Basic" over to "Stand" under the User interface, the
Configuration Interface will display these parameters.
▲When the Version is selected as“AI0”in User interface, this setting item will be
displayed at the Configuration Interface.
(2)Statistic interface
(3)Real Data interface
(4) User interface
NOTE: Before using the remote controller, please confirm its software version
number(on the table and picking box), and then set the Version accordingly, so
that the controller’s parameters can be successfully.
“2.0”SV2.22 LS-LPLI series and SV3.20 Tracer-LPLI series solar controller；
“1.0”SV2.12 LS-LPLI series and SV3.09 Tracer-LPLI series solar controller；
“AI0”All versions of controller with induction module.
4. Buttons
Buttons
Function
Esc
Exit the current interface
Up
Browsing interface: Up/Down
Setting interface: Up/Down
Modify parameter:+/-
Down
OK
Enter the interface/Enter modify parameters
Read
Read the model
Read real-time data
Read configuration
parameters
A beep, read
successfully;
Three beeps, read
unsuccessfully
Send
Send the set parameters to the controller.①
Test
Press the button to turn on the load.
Flashlight
Press the button to turn ON the flashlight
①When the controller’s charging indicator(orange) and battery indicator(Green)
flash for 2 times, it shows that the parameters are set successfully
5. Technical Specifications
Item
RC-10
Apply to model
Tracer LPLI series, LS-LPLI series
Battery
2 batteries (size AA)
Power supply voltage
3VDC
Communication distance
≤10m
Self-consumption
20uA
Sending consumption
37mA
Backlight consumption
3mA
LED consumption(flashlight)
11mA
Environment temperature
0～45℃
Enclosure
IP40
Overall dimension
138 ×58 ×21mm
Net weight
75g
Any changes without prior notice! Version number：V1.1
Statistic
Charge Info
Discharge Info
PV MAX
Day
Day
PV MIN
Month
Month
BAT MAX
Year
Year
BAT MIN
Total
Total
Device
Status
Battery
Info
PV
Info
Load
Info
Battery
BatVolt
PVVolt
Load Volt
InCharge
BatCurr
PVCurr
Load Curr
DisCharge
Temp
Power
Power
User Profile
Language
ZhPRC/EnUS
User
Basic/Stand
Backlight
0-60S,Step length10S
Version
1.0/2.0/AI0◆
Andere Epever Controller Handbücher
Epever
Epever Tracer2606BPL Bedienungsanleitung
Epever
Epever LS EPD Series Bedienungsanleitung
Epever
Epever LandStar LPLW Series Bedienungsanleitung
Epever
Epever LandStar EU series Bedienungsanleitung
Epever
Epever LS-E Series Bedienungsanleitung
Epever
Epever LandStar BPL Series Bedienungsanleitung
Epever
Epever MPPT Bedienungsanleitung
Epever
Epever LS LPLI Series Bedienungsanleitung
Epever
Epever Tracer6210AN Bedienungsanleitung
Epever
Epever Tracer-AN Series Bedienungsanleitung
Epever
Epever Tracer1206A Bedienungsanleitung
Epever
Epever Tracer2606BP Bedienungsanleitung
Epever
Epever ET4415BND Bedienungsanleitung
Epever
Epever Epsolar eBox-WIFI-01 Bedienungsanleitung
Epever
Epever TRACER 6420 Bedienungsanleitung
Epever
Epever EPIPDB-COM-10 Bedienungsanleitung
Epever
Epever LS1024BPD Bedienungsanleitung
Epever
Epever Tracer BPL Series Bedienungsanleitung
Epever
Epever Tracer BP Series Bedienungsanleitung
Epever
Epever XTRA N Series Bedienungsanleitung
