EPH R17 Bedienungsanleitung

CAUTION!

Before commencing, disconnect the

device from the mains. There are parts that

carry mains voltage behind the cover. Never

leave unsupervised when it is open. (Prevent

non specialists and especially children from

gaining access to it.)

Never remove this product from the

electrical baseplate. Disconnect from mains

supply in the event of any damage to any

buttons. Do not use sharp tools to push any

button.

R17 - 1 Zone Timeswitch Operating Instructions

Page 1 of 2

Lower the cover on the front of the unit.

Move the selector switch to the PROG SET position.

You can now program zone 1.

Press the or buttons to adjust the P1 ON time.

Press the or buttons to adjust the P1 OFF time.

Repeat this process to adjust the ON & OFF times for P2 & P3.

When completed, move the selector switch to the RUN position.

4. Setting the date and time

1. Factory default settings

6. Adjusting the program settings

2. Factory program settings

Program: 5/2D

Backlight: On

Keypad: Unlocked

Frost Protection: O

3. Resetting the timeswitch

Press

Contents

1. Factory default settings

2. Factory program settings

3. Resetting the timeswitch

4. Setting the date and time

5. ON/OFF period selection

6. Adjusting the program settings

7. Copy function

8. Reviewing the program settings

9. Boost function

10. Advance function

11. Holiday mode

12. Backlight mode selection

13. Keypad lock and unlock

14. Frost protection

15. Master reset

This 1 zone timeswitch is designed to

provide ON/OFF control for 1 zone, with

the value added application of in built

frost protection.

It is necessary to press the RESET button prior to initial programming.

This button is located behind the cover on the front of the unit.

Lower the cover on the front of the unit.

Move the selector switch to the CLOCK SET position.

Press the or buttons to select the day.

Press the or buttons to select the month.

Press the or buttons to select the year.

Press the or buttons to select the hour.

Press the or buttons to select the minute.

Press the or buttons to select 5/2D, 7D or 24H

The date, time and function are now set. Move the selector switch to the

RUN position to run the program, or to the PROG SET position to change

the program setting.

AUTO The timeswitch operates 3‘ON/OFF’ periods per day.

ALL DAY The timeswitch operates 1’ON/OFF’ period per day.

This operates from the rst ON time to the third OFF time.

ON The timeswitch is permanently on. **ON**

OFF The timeswitch is permanently o. **OFF**

Lower the cover on the front of the unit. By pressing the button,

you can change between AUTO / ALL DAY / ON / OFF for Zone 1.

5. ON/OFF period selection

There are 4 modes available on this timeswitch for users to choose for their

individual application.

Important: Keep this document

RUN

CLOCK

SET

PROG

SET

Mon-Fri

Sat-Sun

5/2D

P1 ON P1 OFF P2 ON P2 OFF P3 ON P3 OFF

6:30 8:30 12:00 12:00 16:30 22:30

7:30 10:00 12:00 12:00 17:00 23:00

All 7 days

P1 ON P1 OFF P2 ON P2 OFF P3 ON P3 OFF

6:30 8:30 12:00 12:00 16:30 22:30

Everyday

24H

P1 ON P1 OFF P2 ON P2 OFF P3 ON P3 OFF

6:30 8:30 12:00 12:00 16:30 22:30

RUN

CLOCK

SET

PROG

SET

Copy function may only be used if the timeswitch is in the 7d mode.

Lower the cover on the front of the timeswitch.

Move the selector switch to the PROG SET position.

Set the ON & OFF times for the day of the week you wish to copy from.

Press button for 2 seconds. The next day of the week will begin to

ash.

Press the button to copy the ON & OFF times to this day.

Press the button to skip a day.

ON & OFF times can be copied to muliple days by using the button.

Press the button when copying has been completed.

When completed, move the selector switch to the RUN position.

RUN

CLOCK

SET

PROG

SET

Holiday

COPY

7. Copy function

EPH Controls Ireland

sales@ephcontrols.com www.ephcontrols.com

EPH Controls UK

sales@ephcontrols.co.uk www.ephcontrols.co.uk

20180621_R17_InsIns_JW

R17 - 1 Zone Timeswitch Operating Instructions

Page 2 of 2

8. Reviewing the program settings

9. Boost function

10. Advance function

This function allows the user to bring forward the next switching time. If the

zone is currently timed to be OFF and the ADV is pressed, the zone will be

switched ON until the end of the next switching time. If the zone is currently

timed to be ON and the ADV is pressed, the zone will be switched OFF until

the end of the next switching time.

Press for this function.

To cancel the ADVANCE function, simply press the button again.

11. Holiday mode

Lower the cover on the front of the unit.

Move the selector switch to the PROG SET position.

By pressing this will review each of the ON/OFF times for P1 to P3.

When completed, move the selector switch to the RUN position.

This function allows the user to extend the ON period for 1, 2 or 3 hours.

If the zone that you wish to Boost is timed to be OFF, you have the

facility to switch it ON for 1, 2 or 3 hours.

Press once, twice or three times respectively.

To cancel the boost function, simply press the button again.

Lower the cover on the front of the unit.

Move the selector switch to the RUN position.

Press the button.

The current date and time will ash on the creen.

It is now possible to enter the date and time when you plan to return.

ZONE

Boost

ZONE

Boost

ZONE

ADV.

ZONE

ADV.

Press the or buttons to adjust the holiday period required.

Press the button.

The timeswitch is now switched OFF for the selected number of days.

By pressing the button again, this will cancel the holiday mode,

thereby returning the timeswitch to the normal setting.

RUN

CLOCK

SET

PROG

SET

RUN

CLOCK

SET

PROG

SET

RUN

CLOCK

SET

PROG

SET

RUN

CLOCK

SET

PROG

SET

Holiday

There are two settings for selection. The factory default setting is ON.

ON The backlight is permanently ON.

AUTO On pressing any button the backlight stays on for 10 seconds.

To adjust the backlight setting, lower the cover on the front of the unit.

Move the selector switch to the RUN position.

Press the button for 5 seconds.

Press either the or buttons to select the ON or AUTO mode.

Press the button.

Selectable range 5~20°C. This function is set to protect pipes against

freezing or to prevent low room temperature when the timeswitch is

programmed to be OFF or is manually OFF.

Frost protection can be activated by following the procedure below.

Move the selector switch to the RUN position.

Press both the and buttons for 5 seconds, to enter selection mode.

Press either the or buttons to to turn On or turn O frost

protection.

Press the button to conrm.

Press either the or buttons to increase or decrease the desired

frost protection setpoint.

Press the button to select.

Zone 1 will be switched ON in the event of room temperature falling below

the frost protection setpoint.

When frost protection is enabled,“Frost” will be visible on the screen.

When frost protection is activated,“Frost” will ash on the screen.

14. Frost protection function O

Unlocked

12. Backlight mode selection

13. Keypad lock and unlock

Lower the cover on the front of the timeswitch.

There are four hinges holding the cover in place.

Between the 3rd and 4th hinges there is a circular hole.

Insert a ball point pen or similar object to master reset the timeswitch.

After pressing the master reset button, the date and time will now need

to be reprogrammed.

15. Master reset

To lock the keypad, press and hold the and buttons for

5 seconds.

will appear on the screen. The keypad is now locked.

To unlock the keypad, press and hold the and buttons for

5 seconds.

will disappear from the screen. The keypad is now unlocked.

Holiday

EPH Controls Ireland

sales@ephcontrols.com www.ephcontrols.com

EPH Controls UK

sales@ephcontrols.co.uk www.ephcontrols.co.uk

20180621_R17_InsIns_JW

Andere EPH Timer Handbücher

EPH

EPH R17-RF Bedienungsanleitung

Beliebte Timer Handbücher anderer Marken

Intermatic

Intermatic P1131 Bedienungsanleitung

Learning Resources

Learning Resources Time Tracker mini Bedienungsanleitung

CEBEK

CEBEK I-215 Bedienungsanleitung

Somogyi

Somogyi home TS MD 5 Bedienungsanleitung

Profile

Profile 010200280 Bedienungsanleitung

Gizmo

Gizmo T4 Bedienungsanleitung

Tekmar

Tekmar Timer 031 Bedienungsanleitung

Daikin

Daikin DST301B61 Bedienungsanleitung

sisel

sisel ENDA ETM2432 Bedienungsanleitung

B&Q

B&Q TE103 Bedienungs- und Wartungshandbuch

Hozelock

Hozelock AC Plus 2700 Bedienungsanleitung

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Bedienungsanleitung

Tork

Tork TU40 Bedienungsanleitung

Emos

Emos EMT400F Bedienungsanleitung

FarmTek

FarmTek Polaris Bedienungsanleitung

Maximum

Maximum CRONUS Bedienungsanleitung

Uberhaus

Uberhaus TD133B Bedienungsanleitung

Clas Ohlson

Clas Ohlson 31-3766 Bedienungsanleitung