Epson DisplayPort ELPIF03 Bedienungsanleitung

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

Printed in China

User's Guide 3

Guide de lutilisateur 15

Bedienungsanleitung 27

Manuale dellutente 39

Manual de usuario 51

使用说明书 63

使用說明書 75

取扱説明書 87

Notices 98

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁體

)

DisplayPort Interface Board ELPIF03

Included Items List

Check the following list to conrm that you have all of the supplied items. If by any

chance there is anything missing or damaged, please contact your dealer.

DisplayPort Interface Board User's Guide (this document)

* To install/remove the interface boards, you need a commercially available No. 2 cross-

head screwdriver.

Safety Instructions

Read this document and the User's Guide supplied with the projector carefully to use

this unit safely and correctly. To allow you to solve any issues or problems quickly, keep

this document close to hand.

So that you can use the product safely and correctly, symbols are used in this guide and

applied to the product to indicate possible harm to the user or to others and the risk

of damage to property. The symbols and their meaning are as follows. Make sure you

understand them properly before reading this guide.

Warning

This symbol indicates information that, if ignored, could pos-

sibly result in death or personal injury due to incorrect han-

dling.

Caution

This symbol indicates information that, if ignored, could possi-

bly result in personal injury or physical damage due to incor-

rect handling.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁體

)

Warning

•This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

•Special techniques are required to install or remove this product, so make sure you

contact a specialist or your local dealer. Failure to do so may cause electric shock or

malfunctions to occur.

•Disconnect the power cord from the projector before installing/removing this prod-

uct to/from the projector.

Installing/removing the product while the power cord is connected may cause elec-

tric shock to occur.

•Do not use sprays that contain ammable gas to remove dust or lint from the prod-

uct. The high heat generated inside the projector may cause a re.

•Do not use or install in locations where it may be subject to water or rain, or high

humidity, such as outdoors, in a bathroom, or shower room, and so on. Otherwise, it

could cause a re or electric shock to occur.

•Do not place the product in a location subject to high levels of dust or humidity, or

in a location subject to smoke or steam such as on a work surface or near a humidi-

er. Otherwise, it could cause a re or electric shock to occur.

•Unless you are a qualied service technician, do not open the product's case unless

instructed to do so in the User's Guide. Never disassemble or remodel the product.

There are high-voltage components inside the product that could cause re, electric

shock, or an accident to occur.

•Do not place containers containing water or any chemical products and so on near

this product. If anything spills or enters the product, it could cause a re or electric

shock to occur.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁體

)

Caution

•Special techniques are required to install or remove this product, so make sure you

contact a specialist or your local dealer. Otherwise, unexpected malfunctions could

occur due to static electricity and so on.

•This product has been designed for exclusive use with Epson projectors. Before in-

stalling this product, check the projector's model number. If this product is installed

on anything except for the specied projector, it may cause damage to this product

or the projector.

•When installing/removing this product to/from the projector, be careful not to

injure yourself on the edge of the product or the edge of the slot.

•Do not use or store in places where the product might be subjected to high and

low extremes of temperature. Also, avoid any sudden changes in temperature.

•Do not store this product within reach of children. There is a risk of children swallow-

ing screws or them getting stuck in the throat. If any screws are swallowed acciden-

tally, contact a doctor immediately.

•Make sure that no dust or trash enters the slot when installing this product. If dust

or trash enters the projector, it could cause a malfunction.

•Do not touch the connectors on this product with your hands. If this product is

damaged by static electricity it will not operate correctly. Make sure you discharge

any static build up before handling this product.

•After removing this product from the projector, store it in an anti-static bag.

•When cleaning this product, do not use a wet cloth or solvents such as alcohol,

benzene, or thinner. Doing so could cause an electric shock or malfunction to occur.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁體

)

Part Names

Front

Name Function

A

DisplayPort1 In port Inputs signals for computers that support

DisplayPort.

B

DisplayPort2 In port

Rear

Name Function

A

Connector Connects to the projector's Slot ports.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁體

)

Installing and Removing the Interface Board

Procedures and illustrations may dier depending on the projector you are using. For

details, see the "User's Guide" supplied with the projector.

Installing

You can install boards in Slot1 or Slot2 on the projector.

A

Remove the slot cover.

Loosen the fixing screws (4 points) with a com-

mercially available No. 2 cross-head screwdriver,

and pull out the slot cover.

Store the removed slot cover in a safe place.

* The slot cover may not be attached depending

on the projector you are using.

Before replacing this product with another inter-

face board, make sure you remove the interface

board from the projector first.

➡P. 8 -“Removing”

B

Make sure the interface board is not at an

angle, and insert it straight into the slot.

Push the interface board firmly into the slot until

it is fully inserted.

* Tighten the xing screws evenly to

prevent the interface board from

tilting.

C

Tighten the xing screws (4 points) with a

commercially available No. 2 cross-head

screwdriver.

Caution

•Tighten the xing screws securely. If the in-

terface board is not xed securely in place,

the projector may malfunction.

•Do not use an electric screwdriver when

tightening the xing screws. Doing so

could damage the interface board.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁體

)

Removing

A

Loosen the xing screws (4 points) with a

commercially available No. 2 cross-head

screwdriver.

B

Grip the knob, and pull the interface board

straight out.

Caution

Make sure the slot cover or an interface

board is always installed in the slot. If dust or

trash enters the projector, it could cause a

malfunction.

When Images are not Displayed

•Make sure that the screws on the interface board are tightened securely.

•Make sure that the projector's [Video Terminal Settings] are correct. For details, see the

guides supplied with the projector.

•Check that the projector or the interface board is using the latest rmware version. For

inquiries, use the contact details provided in the guides supplied with the projector.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁體

)

Specications

For inquiries, use the contact details provided in the guides supplied with the projector.

When disposing of this product, be sure to follow local rules and regulations. When

using this product in a company, be sure to follow the company's disposal rules and

regulations.

Product name ELPIF03

External dimensions W 180

×H 23.5×D 133 mm (not including protruding parts)

Connection ports DisplayPort In port (×2) HDCP2.2 supported

Supported resolutions

WQXGA*, WQHD, QXGA, WUXGA*, 1920 ×1080, UXGA,

WSXGA+, SXGA+, SXGA, WXGA++, WXGA+, WXGA, XGA,

SVGA, VGA

4K (3840 x 2160, Dual Columns), 4K (3840 x 2160, Dual), 4K

(4096 x 2160, SMPTE), 4K (3840 x 2160), HDTV (1080i/1080p),

HDTV (720p), SDTV (576p), SDTV (480p)

Scanning frequency

(horizontal)

27 to 98/270 (kHz)

Scanning frequency

(vertical)

24 to 60/120 (Hz)

Dot clock frequency 25 to 297/1188 (MHz)

Power 17 Vdc, 0.7 A

Operating temperature

range

0 to +50 °C (no condensation)

Storage temperature

range

-10 to +60 °C (no condensation)

Mass Approx. 450 g

* Only compatible when a VESA CVT-RB (Reduced Blanking) signal is being input.

Supported resolutions may vary depending on your projector. For details, see the guides

supplied with the projector.

Trademarks

The DisplayPort Certied Logo and DisplayPort Icons are Registered Trademarks of the

Video Electronics Standards Association (VESA).

The word DisplayPort is a Registered Trademark of VESA in various countries around the

world.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁體

)

List of Safety Symbols

The following table lists the meaning of the safety symbols labeled on the equipment.

No. Symbol mark Approved

standards Meaning

IEC60417

No. 5007

"ON" (power)

To indicate connection to the mains.

IEC60417

No. 5008

"OFF" (power)

To indicate disconnection from the

mains.

IEC60417

No. 5009

Stand-by

To identify the switch or switch position

by means of which part of the equip-

ment is switched on in order to bring it

into the stand-by condition.

ISO7000

No. 0434B

IEC3864-B3.1

Caution

To identify general caution when using

the product.

IEC60417

No. 5041

Caution, hot surface

To indicate that the marked item can be

hot and should not be touched without

taking care.

IEC60417

No. 6042

ISO3864-B3.6

Caution, risk of electric shock

To identify equipment that has risk of

electric shock.

IEC60417

No. 5957

For indoor use only

To identify electrical equipment de-

signed primarily for indoor use.

IEC60417

No. 5926

Polarity of d.c. power connector

To identify the positive and negative

connections (the polarity) on a piece of

equipment to which a d.c. power supply

may be connected.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Epson Computerhardware Handbücher

Epson

Epson PP-100II Gebrauchs- und Pflegehandbuch

Epson

Epson PP-100 III Bedienungsanleitung

Epson

Epson UB-U01III Bedienungsanleitung

Epson

Epson 6200A Bedienungsanleitung

Epson

Epson S5U1C60N08E Bedienungsanleitung

Epson

Epson S5U1C60N08D Bedienungsanleitung

Epson

Epson S5U1C17001C Bedienungsanleitung

Epson

Epson S5U1C62000A Bedienungsanleitung

Epson

Epson S1C63358 Bedienungsanleitung

Epson

Epson S5U1C63000A Bedienungsanleitung

Epson

Epson ARM720T Core cpu Bedienungsanleitung

Epson

Epson E0C6011 Bedienungsanleitung

Epson

Epson S1C88655 Bedienungsanleitung

Epson

Epson Discproducer PP-50BD Bedienungsanleitung

Epson

Epson S1C33 Series Bedienungsanleitung

Epson

Epson S1C63558 Bedienungsanleitung

Epson

Epson S5U1C63000P Bedienungsanleitung

Epson

Epson S1C63616 Bedienungsanleitung

Epson

Epson C32C824151 - UB E02 Print Server Gebrauchs- und Pflegehandbuch

Epson

Epson S1C63666 Bedienungsanleitung

Epson

Epson UB-E03 Bedienungsanleitung

Epson

Epson XJack EFM288XJ Bedienungsanleitung

Epson

Epson S5U1C88000H5 Bedienungsanleitung

Epson

Epson S5U1C17801T1100 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung