Epson PictureMate Flash - PM 280 - PictureMate Flash Compact Photo... Installations- und Betriebshandbuch

PictureMate Flash (PM 280)

8/06 PictureMate Flash (PM 280) - 1

Printer Parts Accessories

Printer Specifications

Printing

Paper

Note: Since the quality of any particular brand or type of paper may

be changed by the manufacturer at any time, Epson cannot guarantee

the quality of any non-Epson brand or type of paper.

(PictureMate photo paper is included in the PictureMate 200

Series Print Pack.)

Caution: Don’t load plain paper; this may cause damage to

PictureMate. Do not load curled or folded paper.

Photo Cartridge

(Included in PictureMate 200 Series Print Pack)

* Ink freezes at 5 °F (–15 °C). It thaws and is usable after

approximately 3 hours at 77 °F (25 °C).

Paper support

Output

tray

External drive port

for external devices

USB port for

computer

Cartridge door

Memory

card light

Photo

viewer

screen

Handle

Photo cartridge

Power inlet

Memory

card slots

Cartridge

release lever

Edge guides

Turns

PictureMate

on or off

Stops printing or

cancels settings

Displays optional

settings menu

Starts

printing

On light

Move through photos

and menu options,

and select settings

Photo viewer

screen

Opens the

output tray

Saves photos

to CD

Displays photos

in different sizes

Select options

on the screen

Built-in CD

burner

(slot is on

right side)

Optional

battery cover

Built-in CD burner

Optional accessory Part number

Epson®Bluetooth®Photo Print Adapter C12C824383

Carrying Case PMBAG06

Rechargeable Battery C12C831082

Printing method On-demand ink jet

Nozzle configuration 90 nozzles × 4

Colors: Black, Cyan, Magenta, and Yellow

Print direction Bidirectional with logic seeking

Control code EPSON ESC/P®raster

Size 4 × 6 inches

Paper type PictureMate®Photo Paper (included with

PictureMate 200 Series Print Pack)

Epson Premium Photo Paper Glossy

Epson Premium Photo Paper Semigloss

Colors Black, Cyan, Magenta, and Yellow

Cartridge life 6 months at 77 °F (25 °C) after installation; 2 years

from production date

Temperature Storage:

–4 to 104 °F (–20 to 40 °C)

1 month at 104 °F (40 °C)

PictureMate Flash (PM 280)

2 - PictureMate Flash (PM 280) 8/06

Mechanical

Electrical

Note: Check the label on the bottom of PictureMate for voltage

information.

AC Adapter

Environmental

Memory Card Slots

Computer USB Interface

External Device Interface

* Not all USB devices are supported.

Safety Approvals

Paper path Sheet feeder, top entry

Sheet feeder capacity 20 sheets

Dimensions Storage

Width: 8.5 inches (215 mm)

Depth: 6.0 inches (152 mm)

Height: 6.9 inches (176 mm)

Printing

(with paper support and output tray open)

Width: 8.5 inches (215 mm)

Depth: 13.3 inches (339 mm)

Height: 11.5 inches (293 mm)

Weight 6.6 lb (3 kg) without photo cartridge,

AC adapter, or optional battery

Printable area Border printing: 0.12 inch (3 mm) margin on

all sides of the paper

Borderless printing: no margins

Input voltage range 110 to 120 V or 220 to 240 V

Power consumption (approximate)

Printing 19.0 W

Sleep mode 4.0 W

Powered off 0.4 W

Model A381H

Rated voltage AC 100 to 240 V

Input voltage range AC 90 to 264 V

Rated frequency 50 to 60 Hz

Input frequency range 49.5 to 60.5 Hz

Rated current 0.4 to 0.8 A

Rated electrical power 42 W

Output 20 VDC, 1.68 A

Temperature Operation: 50 to 95 °F (10 to 35 °C)

Storage: –4 to 140 °F (–20 to 60 °C)

1 month at 104 °F (40 °C)

Humidity Operation: 20 to 80% RH

Storage (in shipping container): 5 to 85% RH (without

condensation)

Card slots

CF Type II card slot Compatible with “CF+ and

CompactFlash™

Specification 2.0”

Sony Memory Stick®/

MemoryStick PRO™/

Duo (requires adapter)

card slot

Compatible with “Memory

Stick Standard version

1.40-00”

Compatible with “Memory

Stick Standard Memory

Stick PRO Format

Specifications version

1.01-00”

SD™(Secure Digital)/

MMC™

(MultiMediaCard™) card

slot

Compatible with “SD

Memory Card Specifications

/ PART1. Physical Layer

Specification Version 2.0”

Compatible with

“MultiMediaCard System

Specifications Version 3.31

cards”

xD-Picture Card™slot Compatible with

“xD-Picture Card Card

Specification Version 1.20

Type M Card/Type H Card”

Voltage

requirements

3.3 V

3.3 V/5 V combined use

Maximum current is 500 mA

Connectivity Universal Serial Bus Specifications Revision 2.0

Universal Serial Bus Specifications Revision 1.1

Bit rate 480 Mbps (High speed device)

Connector type USB Series B

Data Encoding NRZI

Recommended

cable length

Less than 6 feet (1.8 meters)

Connectivity Universal Serial Bus Specifications Revision 2.0*

Bit rate 480 Mbps (High speed device)

Connector type USB Series A

Data Encoding NRZI

Recommended

cable length

Less than 6 feet (1.8 meters)

Safety UL 60950-1

CSA C22.2 No. 60950-1

EMC FCC part 15 Subpart B class B

CSA C108.8 Class B

PictureMate Flash (PM 280)

8/06 PictureMate Flash (PM 280) - 3

Loading Paper

Note: The illustrations in this document show the PictureMate Snap,

but the instructions cover both PictureMate Snap and PictureMate

Flash, except where noted.

Caution: Don’t load plain paper or you may damage PictureMate.

1. Move the handle to the back.

2. Open the paper support.

3. Press the Open button to open the output tray.

4. Slide the edge guides outward.

5. Create a stack of up to 20 sheets of paper and separate the

sheets slightly by fanning them.

6. Place your paper into the slot between the edge guides with

the glossy or whiter side up. Slide the edge guides inward

slightly.

Note: Load a maximum of 20 sheets at one time. Make sure

paper is glossy or whiter side up to prevent smearing.

Store any unused paper in the original package and keep it flat

in a dry area to prevent curling.

Note: When you need more paper, order a PictureMate 200 Series

Print Pack.

Inserting a Memory Card

1. Press the On button to turn on PictureMate.

2. Press the Open button to open the output tray.

Load glossy or

whiter side up

Make sure

paper stack is

beneath arrow

on edge guides

PictureMate Flash (PM 280)

4 - PictureMate Flash (PM 280) 8/06

3. Insert the memory card into the correct slot, as shown.

Insert just one card at a time.

Note: PictureMate can’t read multiple cards at once.

4. Push the card in carefully until it stops (it won’t go in all the

way).

When the card is in, the memory card light comes on and

begins to flash.

Caution: Do not remove a card while the memory card light is

flashing; you may lose photos on your card.

Removing a Memory Card

When you are ready to remove a memory card, make sure the

memory card light is not flashing.

Caution: Do not remove a card while the memory card light is

flashing; you may lose photos on your card.

To remove a card from the top slot, push in the card and

release it, then pull it straight out of the slot.

To remove a card from the bottom slot, push in and release

the card release button so it pops out. Then push in the

button again to eject your card and pull it straight out of the

slot.

Viewing Photos

PictureMate’s photo viewer screen makes it easy to select the

photos you want to print.

Note: You can adjust the angle of the photo viewer screen by raising

or lowering the top of the screen. Be sure to lower the screen before

closing the printer lid.

Bottom slot:

Microdrive™

CompactFlash (Type I and II)

Memory

card light

* Requires adapter

Top slot:

SD and SDHC™

miniSD™and miniSDHC *

microSD and microSDHC *

MMC (MultiMediaCard)

xD-Picture Card

xD-Picture Card (Type M and Type H)

Sony Memory Stick

Memory Stick Duo *

Memory Stick PRO™

Memory Stick PRO Duo™*

MagicGate Memory Stick

MagicGate Memory Stick Duo

Layout

icon

Total number of prints Number of copies of this photo

Guide to

available

options

Icons showing

selected settings

Navigation buttons

for selecting photos or settings

Left

selection

button

(selects

current

option on

screen)

Right selection

button (selects

current option on

screen)

PictureMate Flash (PM 280)

8/06 PictureMate Flash (PM 280) - 5

Changing How Many Photos Display on

the Screen

After inserting a memory card, you can change how many

photos are displayed on the photo viewer screen. Press the

Display button to switch between 1, 6, and 15 photos.

You can also select whether a photo displays with or without

the guide (the information bar near the bottom of the photo).

Identifying Screen Icons

When you make a change to your photos, an icon appears on

the screen next to your photo to indicate the change. (If

necessary, press Display to view one photo per screen

and show the icons.)

The following icons are used:

Frame or decoration is added

Cropping is applied

Red-eye reduction is applied

Color effect is applied

Color correction is applied

Date stamp is turned on

Rotating Photos on the Screen

You can rotate a photo on PictureMate’s photo viewer screen.

This does not affect how the photo prints, only how you see it

on the screen.

1. Select the photo you want to rotate.

2. Press Menu.

3. Press or to highlight Edit, then press OK.

4. Press or to highlight Rotate, then press OK.

5. Select 90 degrees, 180 degrees, or 270 degrees (or select

Do Not Rotate). Your photo is rotated on the screen:

6. Press OK.

Saving Power

When PictureMate is not in use, the photo viewer screen goes

dark after 13 minutes. Press any button to turn it back on.

Printing

PictureMate can print photos from these devices:

❏Your digital camera’s memory card (as described here)

❏A PictBridge®- or USB-DIRECT PRINT™-enabled digital

camera

❏A Bluetooth-enabled device (requires an optional Epson

Bluetooth Photo Print adapter, part number C12C824383)

❏Your computer

❏A CD inserted in the built-in CD drive (see page 11)

❏An external CD drive, Zip disk, or flash memory (thumb)

drive

See the Basics book or the on-screen User’s Guide for

instructions on printing from connected devices.

Make sure your image files meet these requirements:

❏JPEG files or uncompressed Tiff files only

❏Resolutions ranging from 80 × 80 to 9200 × 9200 pixels

Note: PictureMate supports Exif Print image enhancement features.

See your camera manual to see if this feature is included on your

camera.

PictureMate does not support progressive-scan JPEG or RAW

images.

PictureMate recognizes and prints the first 999 photos on

your memory card or device.

Icons

showing

selected

settings

PictureMate Flash (PM 280)

6 - PictureMate Flash (PM 280) 8/06

Printing Individual Photos

If you have many photos on your camera’s memory card, you

can select just the ones you want to print.

1. After inserting a card, press or to view your photos.

2. When you see a photo you want, press OK to select it for

printing.

The selected photo is highlighted orange. If you’ve set the

screen to display one photo at a time, an orange frame

shows you the area that will print.

Note: If you want to edit your photo, see the Basics book for

details.

3. To print more than one copy, press OK to increase the

number of copies.

(Press Copy - to decrease the number using the left selection

button under the photo viewer screen.)

4. To select more photos, press or to view a photo and

press OK to select it. Repeat step 3 to select more copies, if

necessary.

5. To preview your photos, press Print Preview. (Or skip

directly to step 8 to print your photos.)

6. Press or to review your selected photos. If you change

your mind, press the Back button.

7. Press Layout to select the layout of your photos on the

paper. (For more information, see page 8.)

8. Make sure you have enough paper loaded, then press

Print to start printing.

Tip: You can check the total number of prints at the top of the

screen before printing.

Printing All Photos

You can print all the photos on your camera’s memory card,

and select the number of copies to print of each photo.

1. After inserting a card, press Select All. (Select All is the left

selection button under the photo viewer screen.)

The selected photos are highlighted orange.

2. If you want more than one copy of each picture, press OK to

increase the number of copies.

(Press Copy - to decrease the number using the left selection

button under the photo viewer screen.)

3. Press Proceed.

4. To change the number of copies of an individual photo,

press or to select the photo. Then press OK to increase

the number, or Copy - to decrease it.

5. To preview your photos, press Print Preview. (Or skip

directly to step 7 to print your photos.)

Press or to review your selected photos. If you change

your mind, press Back.

6. Press Layout to select the layout of your photos on the

paper. (For more information, see page 8.)

7. Make sure you have enough paper loaded, then press

Print to start printing.

Note: If your card has more than 20 photos, you will need to

reload paper while printing. Load a maximum of 20 sheets at a

time. When you see a message that paper is out, load more

paper and press OK to continue printing. If you need to cancel

printing, press Cancel.

Press here to

choose

Select All

PictureMate Flash (PM 280)

8/06 PictureMate Flash (PM 280) - 7

Printing a Range of Photos

You can choose a range (or sequence) of consecutive photos

from your camera’s memory card (for example, photos 7

through 12).

1. After inserting a card, press Menu.

2. Press or to highlight Select, then press OK.

3. Press or to highlight Select Range, then press OK.

4. Highlight the first photo in the range, then press OK. (You

can use , , , or to select the photo.)

5. Highlight the last photo in the range, then press OK.

The selected photos are highlighted orange:

6. Press Proceed.

7. To change the number of copies of a single photo, press

or to select the photo. Then press OK to increase the

number, or Copy - to decrease it.

8. To preview your photos, press Print Preview. (Or skip

directly to step 10 to print your photos.)

Press or to review your selected photos. If you change

your mind, press Back.

9. Press Layout to select the layout of your photos on the

paper. (For more information, see page 8.)

10. Make sure you have enough paper loaded, then press

Print to start printing.

Printing Photos By Date

You can print photos taken on specific dates. If you have a lot

of photos on your memory card, this makes it easier to find

the ones you want.

1. After inserting a card, press Menu.

2. Press or to highlight Select, then press OK.

3. Press or to highlight Select By Date, then press OK.

You see a list of dates.

4. Press or to highlight the date you want, then press

OK.

A checkmark appears in the box for the date you selected.

You can select additional dates, if desired.

5. After selecting all the dates you want, press Proceed (the

right selection button under the photo viewer screen).

The photos taken on the selected date(s) appear on the

screen.

6. Press OK to select the current photo for printing. Or you

can print all photos or a range of photos (as described on

page 6).

7. Make sure you have enough paper loaded, then press

Print to start printing.

Printing Camera-Selected DPOF Photos

If your camera supports DPOF (Digital Print Order Format),

you can use it to pre-select which photos and how many

copies you want to print.

See your camera’s manual to choose photos for printing with

DPOF, then insert your memory card in PictureMate.

PictureMate automatically reads your pre-selected photos and

displays the message DPOF data was found. Use the DPOF

data?

1. Select Yes (using the right selection button under the photo

viewer screen).

Your photos are previewed on the screen. Press or to

review your selected photos

2. Make sure you have enough paper loaded, then press

Print to print your pre-selected photos.

PictureMate Flash (PM 280)

8 - PictureMate Flash (PM 280) 8/06

Viewing a Slideshow of Your Photos

You can have PictureMate display all the photos on your card

one by one.

1. After inserting a card, press Menu.

2. Press or to highlight Select, then press OK.

3. Press or to highlight Slideshow, then press OK.

After a few moments, the slideshow begins.

PictureMate displays all the photos on your memory card,

then returns to the photo selection screen.

❏To pause the slideshow at any time, press Pause. Press

Proceed to continue.

❏If you see a photo you want to print, you can stop the

slideshow by pressing Stop or Cancel. Then press OK to

select it for printing, as described in the next section.

Choosing a Layout

By default, your photos are printed at the full 4 × 6 size,

without borders. If you want to print pictures with white

borders or place several small photos on one sheet of paper,

you can use the Layout menu to change the layout.

Note: The layout you choose is kept until you remove the memory

card or cancel all settings. To use the same layout whenever you

print, see the Basics book for instructions.

1. After inserting a card, press Menu.

2. Press or to highlight Layout, then press OK.

3. Press or to highlight the layout setting you want for

your photo(s), then press OK.

You have these choices:

Note: For the fastest printing, select Border.

When you print without borders, your images are automatically

expanded and cropped around the edges. This may cause part of

your image to be cut off. You can control the amount of

expansion and cropping; see the Basics book for instructions.

4. At the photo selection screen, press OK to select the current

photo for printing. Or you can print all photos or a range of

photos (as described on page 6).

For the US Passport, ID (portrait package), and 10 Per Page

(portrait package) layouts, PictureMate prints multiple

copies of each photo per sheet. For other layouts, to print

two or more photos per sheet, select multiple copies or

multiple photos.

For example, if you want 3 mini-wallet photos of one image

and 4 of another, select 3 copies of photo A and 4 copies of

photo B. Then choose Mini-wallet as the layout setting.

Your photos will be printed on 2 sheets of paper as shown:

5. Adjust any other settings you want, then press Print to

print your photos.

Borderless Border

Wallet Mini-wallet

(portrait package with 4 copies

of each photo per page)

US Passport

(2 copies of each photo

per sheet)

2 × 2 in Photo 3 × 3 in Photo

Half Page Digital Size

(4:3 aspect ratio)

Proof Sheet

(20 photos)

CD Index

(56 photos)

10 Per Page

(portrait package with 10

copies of each photo per

page)

PictureMate Flash (PM 280)

8/06 PictureMate Flash (PM 280) - 9

Cropping

You can print just part of a photo, cropping out the area that

you don’t want. The part you keep is automatically enlarged

to fit the page. (Cropping affects only your printed photo, not

your original image.)

1. Select the photo you want to crop.

2. Press Menu.

3. Press or to highlight Edit, then press OK.

4. Press or to highlight Crop Photo, then press OK.

You see a blue box around the photo:

This indicates the area that will print; the area outside the

box will be cropped.

5. Set the area you want to print:

❏Press Zoom In to crop more of the photo.

❏Press Zoom Out to crop less of the photo.

❏Press , , , or to move the blue box to a

different part of your photo.

❏Press Display to rotate the blue box.

6. Press OK. You see a close-up of your photo with the crop

setting you selected.

7. Press OK to select the cropped photo for printing.

8. If you want to crop additional photos, repeat steps 1

through 7.

9. Adjust any other settings you want, then press Print to

print your photos.

Red-Eye Removal

When you take photos of people, they sometimes appear to

have red eyes. You can use red-eye reduction to help eliminate

this problem.

Note: Red-eye reduction may not correct red eyes in all photos. The

Red-Eye Reduction setting is kept until you remove the memory

card or cancel all settings. To use red-eye reduction whenever you

print, see the Basics book.

1. Select a photo with the red-eye problem.

2. Press Menu.

3. Press or to highlight Edit, then press OK.

4. Press or to highlight Red-Eye Reduction, then press

OK.

5. Highlight On to turn on the setting, then press OK.

6. At the next screen, select whether to apply the setting to the

current photo or all photos, then press OK.

Adding a Date Stamp

You can add the date your photos were originally taken to the

bottom right corner of each photo.

Note: The date comes from your camera, not from the printer. If this

information is incorrect, adjust the date setting on your camera.

1. Press Menu.

2. Press or to highlight Setup, then press OK.

3. Press or to highlight Date Stamp, then press OK.

4. Highlight On, then press OK.

Note: If a card is already inserted, you need to remove it and reinsert

it before the setting takes effect. (Or press Cancel and select Yes to

cancel all settings.) Your photos are automatically date-stamped until

you turn off the setting.

Printing Photos in Black-and-White or

Sepia

You can print pictures in black-and-white or in a sepia tone

(like an old-fashioned photo) even when the originals are in

color. Your original images are not changed.

Note: The color effect you choose is kept until you remove the

memory card or cancel all settings. To use the same color effect

whenever you print, see the Basics book.

1. Select a photo to print black-and-white or sepia.

2. Press Menu.

3. Press or to highlight Edit, then press OK.

4. Press or to highlight Color Effect, then press OK.

You see this screen:

5. Press or to select

Black & White or Sepia, then press

OK.

PictureMate Flash (PM 280)

10 - PictureMate Flash (PM 280) 8/06

6. At the next screen, select whether to apply the color effect to

the current photo or all photos, then press OK.

You see your photo(s) with the color effect you selected.

7. Press OK to select the current photo for printing. Or you

can print all photos or a range of photos (as described on

page 6).

8. Adjust any other settings you want, then press Print to

print your photos.

Fixing Photos

PictureMate lets you correct the color and improve the image

quality of your photos without using a computer. Two types

of adjustments are available:

❏Automatic adjustments

If your camera supports PRINT Image Matching (P.I.M.)

or Exif Print, the printer’s P.I.M. setting automatically

adjusts your photos for the best results.

The PhotoEnhance setting improves your photos’ colors

and increases contrast and sharpness. It may correct images

that are too dark, too light, or backlit.

❏Manual adjustments

If your photos are too light or too dark, you can manually

adjust their brightness or control the saturation and

sharpness.

If you want, you can make manual adjustments while

PhotoEnhance is turned on in order to fine-tune your

automatic settings.

Note: These settings affect only your printed pictures. They do

not change your original image files.

Automatically Fixing Your Photos

PictureMate’s automatic image adjustments are applied to all

your photos.

Note: The type of automatic adjustment you choose is kept until you

remove the memory card or cancel all settings. To use the same

setting whenever you print, see the Basics book.

1. After inserting a card, press Menu.

2. Press or to highlight Edit, then press OK.

3. Press or to highlight Fix Photos, then press OK.

4. Press or to highlight Auto Correction, then press

OK. You see the Auto Correction menu:

5. Press or to highlight one of these options:

❏PhotoEnhance:This setting improves your photos’

colors and increases contrast and sharpness. It may

correct images that are too dark, too bright, or backlit.

(The default setting is PhotoEnhance.)

❏P.I.M.:This information helps ensure an accurate image

reproduction for files that include P.I.M. (PRINT

Image Matching™) or Exif Print data.

❏None: Prints photos as is or bypasses P.I.M. or Exif

Print data. Select this setting for the fastest printing.

6. Press OK to apply the selected setting.

Note: The setting you select applies to all photos.

7. Press OK to select the current photo for printing. Or you

can print all photos or a range of photos (as described on

page 6).

8. Adjust any other settings you want, then press Print to

print your photos.

Manually Fixing Your Photos

You can manually fix individual photos or fix all your photos

at once. You can make different corrections for each photo on

your memory card.

1. Select a photo that you want to adjust.

2. Press Menu.

3. Press or to highlight Edit, then press OK.

4. Press or to highlight Fix Photos, then press OK.

Andere Handbücher für PictureMate Flash - PM 280 - PictureMate Flash Compact Photo...

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson Stylus Pro Original Montageanleitung

Epson

Epson L110 Bedienungsanleitung

Epson

Epson TM-S2000 Series Gebrauchs- und Pflegehandbuch

Epson

Epson U925 - TM B/W Dot-matrix Printer Bedienungsanleitung

Epson

Epson FX-2175IIN Bedienungsanleitung

Epson

Epson Expression Home XP-212 Bedienungsanleitung

Epson

Epson EPL-N3000 Bedienungsanleitung

Epson

Epson SureColor T3000 Bedienungsanleitung

Epson

Epson NX110 - Stylus Color Inkjet Bedienungsanleitung

Epson

Epson TM-U590 Series Bedienungsanleitung

Epson

Epson ActionPrinter L-1000 Bedienungsanleitung

Epson

Epson TM-T88III series Service-Handbuch

Epson

Epson ColorPage EPL-C8200 Bedienungsanleitung

Epson

Epson TM-P80 Gebrauchs- und Pflegehandbuch

Epson

Epson EPL-7500 Abmessungen

Epson

Epson SC-F2200 Series Konfigurationshandbuch

Epson

Epson ET-2400 Bedienungsanleitung

Epson

Epson PictureMate Pal PM 200 Bedienungsanleitung

Epson

Epson Stylus Pro GS6000 Bedienungsanleitung

Epson

Epson 2200 - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson Stylus C84 Firmware-Update

Epson

Epson 4000 - Stylus Pro Color Inkjet Printer Bedienungsanleitung

Epson

Epson TM-T83II-i Bedienungsanleitung

Epson

Epson WF-M5194 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung