Epson ELPLX03 Bedienungsanleitung

EnglishFrançaisDeutsch

中文

(

简体

)

中文

(

繁体

)

日本語

ELPLX03

User's Guide3

Guide de l’utilisateur13

Bedienungsanleitung23

使用说明书 33

使用說明書43

取扱説明書53

Projection Distance71

External Dimensions75

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

Included Items List

Check the following list to confirm that you have all of the supplied items. If by any chance there

is anything missing or damaged, please contact your dealer.

Lens unit (With lens covers (large and small)) Decorative cover

User's Guide (this guide) USB cable

Use this cable to connect the optional external

camera ELPEC01 to the projector. For details, see the

User's Guide supplied with ELPEC01.

Safety Instructions

Read this document and the User's Guide supplied with the projector carefully to use this unit

safely and correctly. To allow you to solve any unknown points quickly, keep this information

close to hand.

So that you can use the product safely and correctly, symbols are applied in this Guide and on the

product to indicate possible harm to the user or to others and the risk of damage to property. The

indications and their meaning are as follows. Make sure you understand them properly before

reading the guide.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

Warning This symbol indicates information that, if ignored, could possibly

result in death or personal injury due to incorrect handling.

Caution This symbol indicates information that, if ignored, could possibly re-

sult in personal injury or physical damage due to incorrect handling.

Warning

•Disconnect the power cord from the projector before attaching or removing this product.

Attaching or removing while the power cord is connected could cause an electric shock.

•When attaching the product to the projector, make sure that it is securely installed and that

it is locked in place. If this product is not attached correctly it may fall, resulting in personal

injury or an accident.

•When removing dirt and dust from the product, do not use a spray that contains flammable

gas. The high heat generated inside the projector may cause a fire.

Caution

•When projecting, remove the lens cover from the front of the lens unit. The cover may get

hot and may cause a malfunction.

•Before attaching the lens unit, check the projector's model number. If this lens unit is at-

tached to a projector other than the specified projector, the lens unit or the projector could

be damaged.

•Be careful not to trap your finger when attaching this product to the projector. This may

cause an injury.

•Do not disassemble or remodel.

•Do not use or store the projector in places where it might be subjected to high and low

extremes of temperature. Also, avoid any sudden changes in temperature.

•Do not use or store the projector in places where smoke from oil or cigarettes may be pres-

ent, as it can adversely affect the quality of the projected images.

•Do not get it wet.

•Do not drop it or subject it to impacts. When putting this product down, make sure you

place it on a flat, stable surface.

•When moving the projector, do not hold the lens unit and decorative cover. They may come

off and the projector may fall causing an injury.

•Remove the lens unit when transporting the projector. If the projector is transported with

the lens unit attached, the lens unit or the projector could be damaged.

•When carrying the lens unit, be sure to hold the handles on the lens unit.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

Caution

•Do not attach the lens unit when the projector's lens insertion section is facing up. Dust or

dirt could enter the projector.

•Try not to touch the lens section with your hand or fingers. If fingerprints or oils are left on

the surface of the lens, projection quality deteriorates.

•To remove dust on the lens, blow it off using a blower.

•To clean any dirt on the lens, wipe it off gently with a soft cloth.

•Do not use any hard materials to clean the lens and do not subject the lens to any impacts.

•Do not touch or pull the connector part or the cable as this could cause a malfunction.

•When cleaning this product, do not use a wet cloth or solvents such as alcohol, benzene, or

thinner as this could cause an electric shock or a malfunction.

•Do not open or eat the desiccant that comes with the lens unit. If it gets into your eyes or

mouth, flush them immediately with water. If discomfort or vision problems continue after a

thorough flushing, see a doctor immediately.

•Attach the cover to the lens unit, and place it on its side on a stable surface. Failure to do so

may cause the lens unit to fall causing a malfunction or damage.

Projector Information

•When you use the lens unit with the following projector models, update the projector firmware

to V105 or later:

EB-L30002U, EB-L30000U, Pro L30002U, Pro L30000U

You can check the firmware version using the projector menu.

[Info] - [Version] - [Main]

•When you use the lens unit with the following projector models, contact Epson for help:

EB-L25000U, Pro 25000U

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

Removing and Attaching the Lens Unit

Attaching

A

Loosen the lens cover fixing screws.

Turn the screws by hand.

B

While pressing the tabs on both sides of the

lens replacement cover, pull it towards you to

remove it.

Keep the lens replacement cover in a safe place.

C

Raise the lock lever and turn it counterclockwise.

D

Remove the lens cover (small) from the lens unit.

Use the cover when storing or transporting the lens

unit on its own. Keep the lens cover in a safe place.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

E

Insert the lens unit straight so that the

protruding points on the lens fit through the

holes (2 points) at the top of the lens unit.

F

While holding the lens unit firmly, hold the lock

lever and turn it clockwise to lock the lens unit.

Check that the lens cannot be detached.

If it cannot be locked, the lens unit is at an angle.

Remove and then reinstall the lens unit.

* To further secure the lever, tighten the screw. You

can turn the screw by hand.

G

Tighten the screws (4 points) to fix the lens unit.

Tighten the four screws equally to prevent the lens

from being installed at an angle.

Turn the screws by hand.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

H

Tighten the two screws to fix the decorative

cover.

Turn the screws by hand.

You can remove the handles from the lens unit with a

commercially available hexagonal wrench (5 mm).

Keep the handles in a safe space.

I

Remove the lens cover (large).

Keep the lens cover in a safe place.

After Replacing the Lens Unit

After replacing the lens unit, calibrate the lens so that the projector can correctly acquire the

lens position and adjustment range. After attaching a lens unit, a message is displayed when the

projector is turned on. Select [Yes] to calibrate the lens.

Adjusting the Image

For more information on the following, see the User's Guide supplied with the projector.

•Focus adjustment

•Distortion adjustment

When you perform distortion adjustment, the size of the screen changes.

•Lens shift

•Keystone correction

*This product is a fixed focus lens. The zoom function is not supported.

The User's Guide is available from the following Web site.

epson.sn

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

Warning

Do not look into the lens while projecting. The powerful light emitted could cause damage

to eyesight. When turning on the projector at a distance using the remote control, make sure

there is no one looking into the lens.

Caution

Do not install the projector in a location that is subject to vibrations or shocks. Projection

quality deteriorates and it could cause a malfunction.

EnglishFrançaisDeutschItalianoEspañol

中文

(

简体

)

中文

(

繁体

)

日本語

Removing

Caution

•If lens shift has been performed, move the lens position to the home position before replac-

ing the lens unit.

•Turn off the projector and then wait for a while (approximately 30 minutes) before removing

the lens unit. If you touch the lens unit during projection or immediately after turning off the

projector, it could cause a burn.

A

Attach the lens cover (large).

B

Loosen the two screws to remove the decorative

cover.

Turn the screws by hand.

C

Loosen the screws (4 points).

Turn the screws by hand.

Inhaltsverzeichnis

Sprachen:

Andere Epson Projektorzubehör Handbücher

Epson

Epson Panamorph ELPALK2 Bedienungsanleitung

Epson

Epson ELPMB22 Bedienungsanleitung

Epson

Epson PowerLite 450W Bedienungsanleitung

Epson

Epson ELPMB27 Bedienungsanleitung

Epson

Epson ELPBU01 Bedienungsanleitung

Epson

Epson ELPMB62 Bedienungsanleitung

Epson

Epson ELPWP20 Bedienungsanleitung

Epson

Epson ELPDC06 Document Camera For serial numbers beginning with LQZF - DC-06 Document... Bedienungsanleitung

Epson

Epson ELPMB56 Bedienungsanleitung

Epson

Epson EpiqVision Ultra LS500 Bedienungsanleitung

Epson

Epson ELPMBATA - High Security - Mounting Bedienungsanleitung

Epson

Epson POWERLITE 8300I EMP-8300 Bedienungsanleitung

Epson

Epson ELPMB45 Bedienungsanleitung

Epson

Epson ELPWP10 Bedienungsanleitung

Epson

Epson ELPMB29 Bedienungsanleitung

Epson

Epson ELPMBP03 - Structural Round Ceiling Plate Leitfaden

Epson

Epson BrightLink 450Wi - Interactive Projector Leitfaden

Epson

Epson ELPHB800 Bedienungsanleitung

Epson

Epson ELPMBPJF - Universal Projector Ceiling Mount Leitfaden

Epson

Epson BrightLink Solo Interactive Module (IU-01 Bedienungsanleitung

Epson

Epson PowerLite 61p Gebrauchs- und Pflegehandbuch

Epson

Epson ELPMB62 Bedienungsanleitung

Epson

Epson ELPLX01 Bedienungsanleitung

Epson

Epson ELPLL07 Bedienungsanleitung

Beliebte Projektorzubehör Handbücher anderer Marken

Optoma

Optoma BX-AL133B Bedienungsanleitung

PEERLESS

PEERLESS PE 1120 Leitfaden

Osram

Osram SIRIUS HRI Series Handbuch

Presentation Switchers

Presentation Switchers PS111 Bedienungsanleitung

Kramer

Kramer VIA GO Bedienungsanleitung

Yamaha

Yamaha PJL-112 Stücklistenhandbuch

Mitsubishi Electric

Mitsubishi Electric 236CB Betriebsanleitung

Acer

Acer WP100 Bedienungsanleitung

i3 i3board Bedienungsanleitung

CHIEF

CHIEF HB-43E Bedienungsanleitung

Biamp

Biamp Modena Hub Service-Handbuch

NEC

NEC MP10RX Bedienungsanleitung

Panamorph

Panamorph DCR-S3 Bedienungsanleitung

Exact solutions

Exact solutions FRAME-EVO-P10 Bedienungsanleitung

CHIEF

CHIEF VCM103S Bedienungsanleitung

InFocus

InFocus LP70+ Leitfaden

Sharp

Sharp AN-PH20EZ Bedienungsanleitung

Ipevo

Ipevo WPS-HD Bedienungsanleitung