Epson AP-60 - Projector Sound Solution Bedienungsanleitung

AP-60

Installation Guide

or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of

Seiko Epson Corporation.

The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of

this information as applied to other equipment.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for

damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this

product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly

comply with Seiko Epson Corporation’s operating and maintenance instructions.

Trademarks

Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their

respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Important Safety Instructions

CAUTION: To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside. Refer

servicing to qualified personnel.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of

electric shock, do not perform any servicing other than that contained in the operating instructions unless you

are qualified to do so.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electrical shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence

of important operating maintenance (servicing) instructions in the literature accompanying the

appliance.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped.

All safety and operating instructions should be read before using the system. After you have read all instructions,

save this information for later reference.

The documentation and system use graphical symbols to show how to use the system safely. Please understand

and respect these caution symbols in order to avoid injury to persons or property.

Warnings

• Check the specifications of the power cable. Using an inappropriate power cable could result in fire or

electric shock. The power cable supplied with the system is intended to comply with power supply

requirements for the country of purchase. If using within the country of purchase, do not use any power

cable other than the one supplied with the system. If using the system overseas, check the power supply

voltage, outlet shape and electrical rating of the system to make sure that it conform to the local standards,

and purchase a proper power cable in the country.

• Do not use a power cable that is damaged. Fire or electric shock may result.

• Do not modify the power cable.

• Do not place heavy objects on top of the power cable.

• Do not bend, twist or pull the power cable excessively.

• Keep the power cable away from hot electrical appliances.

• Contact your dealer if the wires of the power cable become exposed or broken.

• Connect the power cable to a grounded outlet.

• Take the following precautions when handling the plug. Failure to comply with these precautions could

result in fire or electric shock.

• Do not overload outlets, extension cables or multi-socket devices.

• Do not insert the plug into the outlet with dust present.

• Insert the plug firmly into the outlet.

• Do not handle the plug with wet hands.

• Do not pull the power cable when disconnecting the plug. Always be sure to hold the plug when

disconnecting it.

• Do not set the volume too high from the outset. A loud sound may be produced suddenly that may cause

damage to your hearing. As a precaution, lower the volume before you turn off the system then raise it

gradually after you turn it back on.

• Be aware of the fact that listening to loud sound over a long period of time leads to hearing damage.

• Epson accepts no responsibility for any of the components of this product falling due to the lack of strength

of the ceiling or inadequate installation.

Warnings Indicate information that, if ignored, could possibly result in personal injury or

even death due to incorrect handling.

Cautions Indicate information that, if ignored, could possibly result in personal injury or

physical damage due to incorrect handling.

• Do not leave the system or the remote control with batteries inside a vehicle with the windows closed, in

places where they will be exposed to direct sunlight, or in other places that may become extremely hot.

Thermal deformation or technical malfunction may occur, which could result in fire.

• Do not use sprays containing a flammable gas to remove dirt or dust which is adhering to the system. Static

electricity or an electric spark may be produced when turning the power on, the gases may ignite and result

in a fire.

• Make sure all the bolts, screws, and nuts are tight once the installation is finished. There is a risk of the

system falling and it could cause of severe injury if any of the hardware is loose.

• Unplug the system when it will not be used for extended periods.

• Never open any covers on the system. Dangerous electrical voltages inside the system can severely injure

you.

• Check the structure and materials of the location at which the system (including the safety wires and anchor

bolts) is mounted, and use the most appropriate installation method. If installation work is not carried out

correctly, the system could fall down and cause injury or even death.

• Do not hang from the system or the ceiling mount to avoid the risk of a falling accident.

• Keep the power of the system and the projector turned off during the installation. There is a risk of an

electric shock.

• Be aware of the neck strap when using the pendant microphone. The neck strap may snap off if handled

roughly.

• Never pull the neck strap when it is hung around the neck. It may result in injury or accident.

Cautions

• Unplug the system from the outlet before cleaning. This avoids electric shock during cleaning.

• Unplug the system from the outlet and refer all repairs to qualified service personnel under the following

conditions:

• If smoke, unusual smells or unusual noises come from the system.

• If liquid or foreign objects get inside the system.

• If the system has been dropped or the case has been damaged.

Continuing to use under these conditions may result in fire or electric shock.

• Do not use the system in places where there are lots of humidity or dust, near cooking or heating appliances,

or in places where it may come into contact with smoke or steam.

• Do not place the system on an unstable cart, stand, or table. The system may fall down or tip over, and may

result in injury.

• Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in fire,

injury or corrosion of the system. When replacing batteries, take the following precautions:

• Insert batteries so that the polarities (+ and -) are correct.

• Do not use batteries of different types or mix old and new batteries.

• Do not use any batteries other than those specified in this guide.

• If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them

immediately.

• Replace the batteries as soon as they run out.

• Remove the batteries if you will not be using the system for a long period of time.

• Do not expose batteries to heat or flame and do not put them in water.

• Dispose of used batteries according to local regulations.

• Keep these batteries out of the reach of children. Batteries are choking hazards and are very dangerous if

swallowed.

Consult your state and local regulations regarding proper disposal of batteries.

• Never loosen any bolts, screws, or nuts after installation. Periodically check to make sure that none of them

have come loose. If you find loose hardware, retighten it firmly.

• Before moving the system, be sure to check that the power is turned off, the plug is disconnected from the

outlet, and all cables are disconnected. Fire or electric shock may result.

• Do not place any heavy objects on the system or stand on it. It may tip over and cause injury or damage to

the system.

• Do not use or store the system where the temperature is too high or too low. Avoid places where the

temperature changes frequently and rapidly.

Additional Safety Instructions

• Safety measures must be practiced at all times during the installation of this product. Proper installation

procedures, as outlined in these instructions, must be adhered to. Failure to do so could result in serious

personal injury or death.

• This product should be installed by a professional audio/video installer or other qualified professional.

Epson cannot provide advice concerning construction practices or building codes in your area.

• Prior to installing this product, read the installation instructions completely. Keep these instructions in an

easily accessible place for future reference.

• Do not attempt to install this product if you have any doubts as to its proper assembly and installation.

• Use proper equipment to prevent personal injury or property damage, such as a ladder for reaching high

places or a stud finder to locate the center of studs.

• The included mounting hardware is intended for use with a 1.5-inch pipe mount.

• Do not attempt to use hollow-wall anchors, screws, or similar mounting hardware to mount this product to

wallboard or plasterboard. This product cannot be safely mounted like that. You must mount this product

with the included 1.5-inch mounting pipe, as outlined in these instructions.

• The ceiling structure on which this product is mounted must be capable of safely supporting the weight of

this product (approximately 15.2 lbs [6.9 kg]) and the weight of your projector. If the structures cannot

support these weights, they must be reinforced.

• When mounting the equipment on a ceiling that contains studs or joists, the exact center of the studs or

joists must be confirmed prior to installation.

• Do not install this product where it may be subject to impact or vibration.

• Do not install this product in direct sunlight or near a heater vent, fireplace, or other source of heat.

• Do not install this product on a slanted ceiling.

• Personal injury and/or damage to the equipment could result from dropping or mishandling this product.

• Some of the components included with this product may be packaged in plastic bags. Keep plastic bags

away from small children to avoid any risk of suffocation.

• Do not place the components of this product near sources of heat or in direct sunlight.

• Make sure nothing blocks the ventilation openings on any of the components. Allow for sufficient heat

dispersion. Ensure that there is at least 8 inches (20 cm) between any ventilation openings and the walls or

ceiling.

• Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

• When unplugging the power cord, handle it carefully. Hold the plug when unplugging the cord.

• This product should be operated only from the type of power source indicated on the marking label. If you

are not sure of the type of power supplied in your (school, business, home), consult your product dealer or

local power company.

• Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk

of fire or electric shock.

• Keep the system components free from moisture, water, and dust.

• Do not let insecticides, benzene, or thinner come in contact with any components of the system.

• Never push objects of any kind through openings in the system components as they may touch dangerous

voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on

the product.

• Except as specifically explained in these instructions, do not attempt to service this product yourself. Refer

all servicing to qualified service personnel.

• Never disassemble or modify the product in any way. Dangerous electrical voltages inside the components

can severely injure you.

• When replacement parts are required, be sure the service technician has used replacement parts specified by

the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result

in fire, electric shock, or other hazards.

• Do not place the system near high-voltage power lines or sources of magnetism. The system may not

operate properly.

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Planning the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Installing the IR Dome Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Install the Mounting Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Install the AP-60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Install the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Attach the Neck Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Insert Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Adjust the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Where To Get Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Introduction

Before installing the AP-60, you should perform the following steps:

• Run all wiring required for the audio and power connections for the AP-60 and projector.

• If you have a projector already installed, remove the projector from the 1.5-inch mounting pipe and remove

the old mounting pipe. If you aren’t installing a projector with the AP-60, make sure you have a ceiling

mount compatible with a 1.5-inch NPT mounting pipe installed.

Parts List

Before starting, make sure you have all the parts listed below. If you’re missing any parts, contact Epson as

described on page 26.

Note

The included installation hardware is designed for a 1.5-inch pipe mount. You may need additional hardware if your setup

varies.

Additional Accessories

You can purchase projectors, screens, or other accessories from an Epson authorized reseller. To find the nearest

reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales)

or www.epson.ca (Canadian sales).

To order an additional pendant microphone, request part number V12H3290M1.

AP-60

Pendant microphone

Remote control

M10 bolt and nut

Lower bracket

M47.5 jam nut

Guy wires Coaxial cable

IR dome sensor

Power cable R6 (manganese)

AA batteries

Neck strap LR6 (alkaline)

AA batteries

Mounting pipe

Planning the Installation

Here are the basic steps required to install the AP-60. Allow at least 1 to 2 hours to complete the installation. Be

sure to read all of the installation instructions before starting.

Note

Epson strongly recommends that the AP-60 be installed by a professional audio/video installer or other qualified

professional. Epson cannot provide advice concerning construction practices or building codes in your area.

The Installation requires at least two people.

For added safety, install the included guy wires to prevent the AP-60 from falling. Ensure that the ceiling is strong enough

before installing the wires.

3Install the AP-60 and connect cables.

See page 14.

2Install the mounting pipe. See page 13.

1Install the IR dome sensor. See page 11.

4Install projector and connect cables.

See page 19. 5Adjust the sound. See page 21.

Andere Handbücher für AP-60 - Projector Sound Solution

Inhaltsverzeichnis

Andere Epson Projektor Handbücher

Epson

Epson 730c - PowerLite Projector Abmessungen

Epson

Epson PowerLite 737c Bedienungsanleitung

Epson

Epson EB-Z10005U Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 3020plus Bedienungsanleitung

Epson

Epson PowerLite 7000XB Bedienungsanleitung

Epson

Epson dreamio EMP-TW200H Bedienungsanleitung

Epson

Epson dreamio EMP-TW200 Bedienungsanleitung

Epson

Epson 835p - PowerLite XGA LCD Projector Bedienungsanleitung

Epson

Epson EB-L250F Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 1080 Montageanleitung

Epson

Epson PowerLite S1 Installations- und Betriebshandbuch

Epson

Epson PowerLite S3 Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite 1775W Bedienungsanleitung

Epson

Epson PowerLite 85 Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 9350 Bedienungsanleitung

Epson

Epson EB-G5750WU Bedienungsanleitung

Epson

Epson PowerLite 820p Bedienungsanleitung

Epson

Epson EH-TW9200 Bedienungsanleitung

Epson

Epson EB-1761W Bedienungsanleitung

Epson

Epson EX30 Bedienungsanleitung

Epson

Epson EB-L200X Bedienungsanleitung

Epson

Epson EMP-73 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Bedienungsanleitung

JVC

JVC 1108TTH-AO-AO Bedienungsanleitung