Epson BrightLink 450Wi - Interactive Projector Systemhandbuch

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

Using the Remote Control

Make sure batteries are installed. Follow

these tips for using the remote control:

Point the remote control at the projector or at the screen.

Stand within 19.7 feet (6 meters) of the projector.

Aim the remote control within 30° to the side of, or 15° above or

below, the remote control receivers on the projector.

Controlling the Picture and Sound

You can use the remote control to temporarily turn o the picture and

sound, freeze the action, zoom in on the picture, and adjust the

volume.

Turning Off the Picture and Sound

Press theA/V Mute button on the remote control to turn o the

image and sound, and darken your screen. This is useful if you want to

temporarily re-direct your audience’s attention without the distraction

of a bright screen.

To turn the image and sound back on, press the button again.

You can create an image, such as a company logo or picture, to display

on the screen whenever you press the A/V Mute button.

note

If a button is stuck down for

longer than 30 seconds, the

remote control stops

operating to conserve battery

power. When you release the

button, normal operation

resumes.

Using the remote control

under bright uorescent

lamps or in direct sunlight

may aect projector

response.

A/V Mute button

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

Stopping Action

Press the Freeze button on the remote control to stop the action in

your video or computer image. The image freezes but the sound

continues.

To restart the action, press the Freeze button again.

Zooming In on Your Image

You can zoom in on a portion of the image using theE-Zoom buttons

on the remote control.

If you are using one of the interactive pens, the pen position and

mouse position will not match when you press the E-Zoom buttons.

1. Press the E-Zoom + button on the remote control.

You see a crosshair indicating the center of the zoom-in area.

2. Use the arrow (menu navigation) buttons to position the

crosshair.

3. Continue pressing the E-Zoom + button to enlarge the selected

area up to 4 times.

note

The Freeze function pauses

the image, not the sound.

Because the source continues

to transmit signals, it will

not resume at the same

point.

Freeze button

note

You cannot use the

Progressive feature

while you are using

E-Zoom.

E-Zoom +

button

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

4. While the image is enlarged, you can:

Use the arrow buttons to move around the screen.

Press the E-Zoom – button to zoom out.

5. Press the ESC button to return the image to its original size.

Controlling the Volume

To change the volume on the projector, press the or button on

the remote control.

You can also adjust the volume using the projector’s menu system.

Displaying Patterns

You can display a test pattern or one of the following 4 patterns for

use on a whiteboard or chalkboard:

1. Press the Menu button on the remote control, then select the

Settings menu and press Enter.

2. Highlight Pattern and press Enter.

3. Highlight Pattern Type and press Enter.

note

To temporarily shut o the

sound and picture, press the

A/V Mute button.

Volume

buttons

Pattern 2Pattern 1 Pattern 3 Pattern 4

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

4. Select one of the patterns shown on page 3 or choose Test

Pattern. If you want to create your own pattern, choose User

Pattern . See below for more information.

5. Press Enter to select the pattern you want, then press Esc.

6. Choose Pattern Display to display the pattern.

7. Press Esc when you’re nished displaying the pattern.

Assigning a Pattern to the User Button

You can assign any of the available patterns to the User button on the

remote control, and then display it by simply pressing the User

button.

1. In the Settings menu, select the Pattern Type

2. Highlight User Button and press Enter.

3. Highlight Pattern Display and press Enter.

4. Press Menu to exit.

Creating Your Own Pattern

You can transfer any image from yourcomputer or video source to the

projector and then use it as a pattern. If you assign it to the User

button as described above, you can display it any time you want by

simply pressing the User button on the remote control.

Start by displaying the image you want to use from a computer or

other source. Then follow these steps to capture the image and transfer

it to the projector:

1. In the Settings menu, highlight Pattern and press Enter.

2. Select User Pattern and press Enter.

3. When you see a message asking if you want to use the current

image as the pattern, select Yes and press Enter.

4. Press Enter again.

note

When you choose an image

for the user pattern, it erases

any previously used image.

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

5. When you see a conrmation message, select Yes and press

Enter. Saving the image may take a few moments. Do not use

your projector, remote control, or video source while the pattern

is being saved.

6. When you see a message that saving is complete, press Menu to

exit.

Operating Your Computer With the

Remote Control

You can use the remote control in place of your computer’s mouse so

you won’t have to stand next to the computer to control the

presentation.

Before you can use the remote control to operate your computer, you

must connect a USB cable to the TypeB (square) USB port on

the projector (see page 25) and select Wireless Mouse as the

USB Type B setting on the Extended menu.

note

You can use the remote

control as a wireless mouse

only when projecting from

the Computer1 or

Computer2 ports.

You may need to select

specic settings on your

computer to use the remote

control as a mouse. See your

computer documentation for

details.

Page up or down

to change slides

in PowerPoint

Right-click

Left-click

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

Then you can control your computer as follows:

Use the remote control’s Page Up or Page Down buttons to

move through presentation slides.

Use the arrow buttons to move the cursor on the screen.

Press the Enter button once to left-click, or twice to double-click.

Press the Esc button to right-click.

To drag-and-drop, hold down the Enter button. Then use the

arrow buttons to drag the object. When it’s where you want it,

release the Enter button.

Highlighting Your Presentation

You can display a pointer to call out important information on the

screen. If you want to customize the pointer tool, you can choose from

three alternative shapes.

Using the Pointer Tool

1. To activate the pointer tool, press the Pointer button on the

remote control. A pointer appears on the screen.

If you prefer to use a dierent style of pointer, see the instructions

in the next section.

2. Use the arrow buttons on the remote control to position the

pointer on the screen.

3. When you’re done using the pointer, press the Pointer or Esc

button to clear the screen.

note

You can use the

Page Up/Page Down

feature with USB Display.

Pointer

button

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

Customizing the Pointer Tool

You can change the appearance of the pointer by choosing from three

alternative shapes.

1. Press the Menu button on the remote control, highlight the

Settings menu, highlight Pointer Shape, and press Enter. You

can select one of the pointer shapes shown at the left.

2. Select the shape you want and press Enter.

3. Press Menu to exit from the menu system.

Presenting a Slideshow

You can use your projector’s Slideshow feature whenever you connect

a USB device that contains image les having a .JPG lename

extension. This lets you quickly and easily display individual images,

or start a slideshow of all the images in a folder. You can control your

slideshow using the projector remote control.

For an instant PowerPoint presentation, convert your PowerPoint

slides to individual .JPG les (saveas *.jpg) and store them in a folder.

Copy that folder to a USB ash memory drive (thumb drive), or other

USB device. Then connect the device to the projector and begin your

presentation.

You can switch the display from the device displaying the slideshow to

another source using the Source Search button or one of the specic

source buttons on the remote control. To return to the Slideshow

source, press Source Search and select USB, or simply press the

USB button.

Starting a Slideshow

1. Connect a USB device to the projector’sTypeA (at) USB

port.

2. If you are connected to another image source, press the USB

button on the remote control to go to the Slideshow program.

note

You can project .JPG les in

resolutions up to

4608 × 3072, with pixel

counts incrementing in

multiples of 8.

If a .JPG le is highly

compressed, your projector

may not be able to display it

correctly. The projector can’t

display progressive or

CMYK .JPG les.

You cannot project movie

les using the Slideshow

feature.

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

If you are not connected to another image source, the Slideshow

program appears automatically.

Files for images that have been scanned or modied will display

an icon, rather than a thumbnail image.

If necessary, press the arrow buttons on the remote control to

highlight the device you want to present from, then press the

Enter button.

3. If you need to select a subfolder on your device, press the arrow

buttons to highlight the folder and press Enter.

4. To display an individual image, press the arrow buttons to

highlight it and press Enter. To display additional image les,

press the left or right arrow button.

5. To display a slideshow of all the images in the current folder, use

the arrow buttons to highlight Slideshow on the bottom of the

Slideshow screen and press Enter. The images display sequentially

one time through. At the end, you see the folder display again.

Select the following as necessary to control your display or slideshow:

To move back up a folder level, highlight Back to Top at the top

of the Slideshow screen and press Enter.

To select a dierent device, highlight Select drive in the upper

right corner of the screen, press Enter, and select the device.

note

To rotate a displayed image,

press the up or down button on

the remote control until it is

displayed correctly.

note

To display a slideshow from

a folder that is not open,

highlight the folder and press

the Esc button on the

remote control. Then select

Slideshow from the menu

that appears and press

Enter.

To begin a slideshow from a

particular image, use the

arrow buttons to highlight

that image, press Enter,

then press Enter again.

INSTALLATION HANDBOOK

Remote Control Information

Epson BrightLink 450Wi / 455Wi

If all the images in a folder do not t on the Slideshow screen,

highlight Next page at the bottom of the screen and press Enter

to display the next screen full of images. Select Previous page at

the top of the screen to select the previous screen.

To exit the slideshow, press Esc, select Exit, and press Enter.

Selecting Slideshow Display Options

1. Highlight Option at the bottom left corner of the slideshow

screen and press Enter. You see this screen:

2. Highlight the options you want to use, and press Enter.

3. When you are nished, highlight OK at the bottom of the screen

and press Enter. (Highlight Cancel and press Enter to cancel.)

Option Available settings

Display

order

Name order displays files in name order

Date order displays files in date order

Sort order In Ascending sorts the files first to last

In Descending sorts the files last to first

Continuous

play

On displays a slideshow continuously

Off displays a slideshow one time through

Screen

switching

time

No does not switch file display automatically

1Sec. to 60Sec. displays files for the selected time

and switches them automatically

Andere Handbücher für BrightLink 450Wi - Interactive Projector

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Projektor Handbücher

Epson

Epson PowerLite Pro G5350NL Bedienungsanleitung

Epson

Epson EX30 Referenzhandbuch

Epson

Epson PowerLite 1261W Bedienungsanleitung

Epson

Epson PowerLite 54c Technisches Datenblatt

Epson

Epson EMP-S4 Bedienungsanleitung

Epson

Epson PowerLite 703C Bedienungsanleitung

Epson

Epson PowerLite 470 Bedienungsanleitung

Epson

Epson PowerLite Pro Z8150NL Referenzhandbuch

Epson

Epson MegaPlex MG-850HD Bedienungsanleitung

Epson

Epson EB-W7 Bedienungsanleitung

Epson

Epson PowerLite 61p Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 720 Handbuch

Epson

Epson EX3212 Referenzhandbuch

Epson

Epson ELPMB67 Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema LS9600e Bedienungsanleitung

Epson

Epson PowerLite 1970W Technisches Datenblatt

Epson

Epson PowerLite 61p Bedienungsanleitung

Epson

Epson PowerLite 811p Bedienungsanleitung

Epson

Epson PowerLite X12 Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 4040 Bedienungsanleitung

Epson

Epson PowerLite 700 Bedienungsanleitung

Epson

Epson EF11 Bedienungsanleitung

Epson

Epson ESC/VP21 Bedienungsanleitung

Epson

Epson PowerLite Cinema 500 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Bedienungsanleitung

JVC

JVC 1108TTH-AO-AO Bedienungsanleitung