Epson BrightLink 475Wi Systemhandbuch

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

1

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to

the side in case the lamp is broken.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

4. Slide off the lamp cover.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

2

5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.

6. Lift up the lamp handle and gently pull the lamp out of the projector.

Note: The lamp(s) in this product contain mercury. Please consult your state and local

regulations regarding disposal or recycling. Do not put in the trash.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

3

7. Gently insert the new lamp into the projector along the guide rail. If it does not fit easily, make sure it

is facing the right way. Press the handle down.

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.

8. Tighten the screws to secure the lamp.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

4

9. Replace the lamp cover and tighten the screw to secure it.

Note: Be sure the lamp cover is securely installed or the lamp will not come on.

Reset the lamp timer to zero to keep track of the new lamp’s usage.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

5

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement

message and to keep track of lamp usage correctly.

Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage

information.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Reset menu and press Enter.

4. Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours.

5. Select Yes and press Enter.

6. Press Menu or Esc to exit the menus.

Andere Handbücher für BrightLink 475Wi

17

Dieses Handbuch passt für folgende Modelle

2

Inhaltsverzeichnis

Andere Epson Projektor Handbücher

Epson

Epson PowerLite Pro Cinema 9100 Bedienungsanleitung

Epson

Epson dreamio EH-R4000 Bedienungsanleitung

Epson

Epson EB-710Ui Bedienungsanleitung

Epson

Epson EB-1485Fi Bedienungsanleitung

Epson

Epson PowerLite 1945W Bedienungsanleitung

Epson

Epson PowerLite 30C Bedienungsanleitung

Epson

Epson EMP-S3 Bedienungsanleitung

Epson

Epson ActionPrinter 4000 Bedienungsanleitung

Epson

Epson PowerLite Cinema 500 Abmessungen

Epson

Epson PowerLite 77c Bedienungsanleitung

Epson

Epson PowerLite 53c Bedienungsanleitung

Epson

Epson TW600 Bedienungsanleitung

Epson

Epson AP-60 - Projector Sound Solution Bedienungsanleitung

Epson

Epson EMP-500 Bedienungsanleitung

Epson

Epson EB-X14H Bedienungsanleitung

Epson

Epson PowerLite 4650 Referenzhandbuch

Epson

Epson BrightLink 595Wi Bedienungsanleitung

Epson

Epson EMP 7800 Bedienungsanleitung

Epson

Epson PowerLite 720c Bedienungsanleitung

Epson

Epson MovieMate 25 Handbuch

Epson

Epson PowerLite 505c Bedienungsanleitung

Epson

Epson brightlink Bedienungsanleitung

Epson

Epson 1700C - PowerLite XGA LCD Projector Bedienungsanleitung

Epson

Epson EB-1470Ui Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Bedienungsanleitung

JVC

JVC 1108TTH-AO-AO Bedienungsanleitung