Epson PowerLite 850p Bedienungsanleitung

EPSON PowerLite 7850p

Multimedia Projector

Macintosh Supplement

System Requirements

Installing the Software

Setting Up Your Macintosh

Connecting to the Projector

CPD-17267

EPSON is a registered trademark and EasyMP is a trademark of SEIKO

EPSON CORPORATION.

PowerLite is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification

purposes only and may be trademarks of their respective owners. EPSON

disclaims any and all rights in those marks.

Introduction

Your EPSON PowerLite 7850p projector now lets you project

wirelessly from an Apple®Macintosh®computer equipped with an

AirPort®or AirPort Extreme (802.11b or 802.11g) wireless network

interface. This supplement includes the following:

■System requirements for using the new wireless software

■Software installation instructions

■How to set up your Macintosh for wireless projecting

■How to connect to the projector

When you’ve finished with the instructions in this supplement, see the

User’s Guide for information about creating projector groups,

receiving e-mail alerts, or using other networking features supported

by your projector.

System Requirements

Before you install the software, make sure your Macintosh meets the

following requirements for projecting wirelessly:

■Power Macintosh®series, iMac,

®PowerBook,

®or iBook®series

system

■Mac OS X 10.2.4 or above

■AirPort (802.11b) or AirPort Extreme (802.11g) wireless network

interface

■At least 256MB of RAM

■At least 128MB of free hard disk space

■SVGA (800 ×600) or better display adapter and monitor

note

If you are using AirPort

Extreme, you must set the

Wireless mode to 802.11b

only in the AirPort ®Admin

Utility. See your AirPort

documentation, or contact

Apple technical support for

help.

Installing the Software

1. Insert the NS Connection for Macintosh software CD-ROM in

your drive. If necessary, double-click the EPSON CD-ROM icon.

2. Double-click the EMP NS Connection.pkg icon. The following

screen displays:

3. Click Continue. You see the software license agreement.

4. Click Continue, then Agree.

5. Select the destination drive, then click Continue. You see the

following installation window:

6. Click Install. When installation is complete, close the installation

window.

Setting Up Your Macintosh

Before you begin, do the following:

■Configure your projector for wireless projecting; see the User’s

Guide for instructions.

■Insert the EPSON wireless (802.11b) card in the projector and

start EasyMP.

™

See the User’s Guide for details.

Follow these steps to set up your Macintosh for wireless projecting:

1. From the Apple pull-down menu, select System Preferences.

Then double-click the Network icon. You see the Network

Settings window.

2. Select Network Port Configuration in the Show pull-down

menu:

3. Under Port Configurations, select AirPort.

4. Click Apply Now. Then close the window.

note

Don’t set your projector to

Channel ad hoc mode. This

mode is not supported for

Macintosh.

then select AirPort

Select Network

Port Configurations

here. . .

note

If you don’t need the other

network ports, disable them

by deselecting their check

boxes. If more than one

network port is enabled, the

projector software warns

you to turn off AirPort

when you first connect to

the projector. Disregard this

message.

5. For optimal performance, set your screen resolution to

1024 ×768 or lower with a color depth of thousands of colors.

6. Click the AirPort icon on the Application bar at the top of the

Macintosh desktop. You see a pull-down menu like this:

7. Check to make sure AirPort is turned on.

8. Select your projector’s ESSID from the pull-down menu.

If you don’t see the projector’s ESSID, see page 8 for

troubleshooting tips.

Projecting Wirelessly

Before you begin, make sure you’ve inserted the EPSON wireless

(802.11b) card in the projector and followed the steps beginning on

page 5 to set up your Macintosh.

1. Double-click the EMP NS Connection icon in your Applications

folder.

note

See your Apple documentation

for instructions on setting up

your Macintosh.

note

Use either ESSID ad hoc

(computer-to-computer) mode

or Access Point (infrastructure)

mode when you set up your

projector. Channel ad hoc

mode is not supported for

Macintosh.

See the User’s Guide for

information about the ESSID.

You see a screen similar to the following:

If the connection is working properly, you see your projector

listed. If you have additional EPSON projectors on the network,

they are also listed.

The color of the status icon next to each projector’s name

indicates its status:

■Gray—The projector is not connected

■Orange—The projector is connected to another computer

■Green—The projector is connected to your computer

2. Select your projector and click Connect.

If more than one projector is listed, you can select up to four

projectors and connect to them at the same time.

3. If you turned the projector keyword on when setting up the

projector, enter it when prompted and click OK. (It’s the

four-digit number displayed at the bottom of your projector

screen.)

This box indicates

projector status

Select projector

note

You can connect to a projector

that is being used by another

person; however, doing so

automatically disconnects the

other user.

If you assign a keyword to the

projector, only people in the

same room as the projector can

connect to it, so you won’t be

disconnected during a

presentation.

Once the connection is established, your computer’s desktop and

a floating control bar are projected:

4. If necessary, drag the control bar out of the way, or minimize it.

5. When done with your presentation, click Disconnect on the

control bar.

Solving Connection Problems

If you don’t see your projector in the EMP NS Connection window,

try the following:

■Make sure the EPSON 802.11b card is inserted in the projector;

see the User’s Guide for instructions. If you have to insert the card,

restart EMP NS Connection, or the program will not be able to

detect the projector.

■Make sure you aren’t projecting one of the EasyMP configuration

screens. You should see a message that the projector is ready to

connect. If you have to exit a configuration screen, restart

EMP NS Connection.

■Click the AirPort icon on the Application bar at the top of your

Macintosh desktop to make sure you’re trying to connect to the

right network. The projector’s ESSID should be displayed and

selected.

note

Position your pointer over a

button for a description of its

function. For more detailed

descriptions, see the User’s

Guide.

■Make sure AirPort is turned on. Click the AirPort icon on the

Application bar and select AirPort: On if necessary. If you don’t

see the AirPort icon, follow the instructions beginning on page 5

to enable AirPort.

■If possible, move your projector, Macintosh, and base station (if

you’re using one) closer together.

■If you’re using Access Point (infrastructure) mode and you’re

connecting to the wrong network, you may be experiencing signal

interference from another network. Open the Applications

folder on your hard drive, then double-click the Utilities folder.

Double-click AirPort Admin Utility. If you don’t see your base

station listed, reset the base station (see the instructions that came

with your base station).

If your base station is listed, check its name and IP address. Your

projector should have the same ESSID name, and the first three

segments of the projector’s IP address should be identical to the

first three segments of the base station’s IP address. The last

segment of the projector’s IP address should be close, but not

identical to the last segment of the base station’s IP address. In

addition, the projector’s gateway address should be identical to

the base station’s IP address. See the User’s Guide for instructions

on setting up the projector in Access Point mode.

■If you’re unable to connect to the projector, use IP Connect

Mode to connect manually. See the User’s Guide for instructions.

■Check the Network Configuration tab for your AirPort base

station. If you set up your projector to connect in DHCP mode,

Distribute IP Addresses and Start a Single IP Address should

both be on. See your AirPort documentation for details about

configuring your base station.

note

In Access Point mode, your

projector’s ESSID name and

IP number are shown at the

bottom of the EasyMP

Network Screen.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Projektor Handbücher

Epson

Epson PowerLite 4300 Bedienungs- und Sicherheitshinweise

Epson

Epson PowerLite 61p Bedienungsanleitung

Epson

Epson PowerLite 1221 Technisches Datenblatt

Epson

Epson EMP-820 Bedienungsanleitung

Epson

Epson EB-L735U Bedienungsanleitung

Epson

Epson LS500WATV Bedienungsanleitung

Epson

Epson EMP-715 - XGA LCD Projector Bedienungsanleitung

Epson

Epson EH-LS500W Bedienungsanleitung

Epson

Epson EH-TW8000 Bedienungsanleitung

Epson

Epson EB-145OUI Bedienungsanleitung

Epson

Epson EB-S9 Bedienungsanleitung

Epson

Epson EB-W12 Bedienungsanleitung

Epson

Epson 6110i - PowerLite XGA LCD Projector Technisches Datenblatt

Epson

Epson PowerLite Pro Z8455WUNL Bedienungs- und Sicherheitshinweise

Epson

Epson PowerLite 51c Bedienungsanleitung

Epson

Epson 1705C - PowerLite XGA LCD Projector Bedienungsanleitung

Epson

Epson brightlink Bedienungsanleitung

Epson

Epson PowerLite 92 Bedienungsanleitung

Epson

Epson PowerLite 1220 Systemhandbuch

Epson

Epson MovieMate 50 Bedienungsanleitung

Epson

Epson PowerLite 77c Montageanleitung

Epson

Epson PowerLite 85 Technisches Datenblatt

Epson

Epson Dreamio EMP-TW1000 U Bedienungsanleitung

Epson

Epson EB-595Wi Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Bedienungsanleitung

JVC

JVC 1108TTH-AO-AO Bedienungsanleitung