Epson PowerLite S17 Systemhandbuch

Andere Handbücher für PowerLite S17

1

Dieses Handbuch passt für folgende Modelle

2

Inhaltsverzeichnis

Andere Epson Projektor Handbücher

Epson

Epson EMP 400W Bedienungsanleitung

Epson

Epson PowerLite 5600p Abmessungen

Epson

Epson PowerLite 535W Technisches Datenblatt

Epson

Epson EH-TW5910 Bedienungsanleitung

Epson

Epson EH-LS500W Bedienungsanleitung

Epson

Epson EF-100W Bedienungsanleitung

Epson

Epson EB-755F Betriebsanleitung

Epson

Epson E-Torl EB W6 Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 9100 Bedienungsanleitung

Epson

Epson EMP-62 Bedienungsanleitung

Epson

Epson EMP-5500 Bedienungsanleitung

Epson

Epson dreamio EMP-TW200H Bedienungsanleitung

Epson

Epson 821p - PowerLite XGA LCD Projector Bedienungsanleitung

Epson

Epson EMP-820 Bedienungsanleitung

Epson

Epson EH-TW9000W Bedienungsanleitung

Epson

Epson PowerLite 83V Referenzhandbuch

Epson

Epson PowerLite Pro G5350NL Bedienungsanleitung

Epson

Epson V11H452520W Bedienungsanleitung

Epson

Epson POWERLITE 85+ Technisches Datenblatt

Epson

Epson EB-L1405U Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 5030UBe Referenzhandbuch

Epson

Epson PowerLite Pro Z8000WUNL Referenzhandbuch

Epson

Epson PowerLite S39 Bedienungsanleitung

Epson

Epson PowerLite 1720 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Bedienungsanleitung

JVC

JVC 1108TTH-AO-AO Bedienungsanleitung

INSTALLATION HA NDBOOK

Maintenance

Epson PowerLite S17 / W17 / X17

1

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

4. Slide the lamp cover out and lift it off.

removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side

of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you

open the lamp cover.

INSTALLATION HA NDBOOK

Maintenance

Epson PowerLite S17 / W17 / X17

2

5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.

6. Grasp the raised section of the lamp and gently pull the lamp out of the projector.

Note: The lamp(s) in this product contain mercury. Please consult your state and local

regulations regarding disposal or recycling. Do not put in the trash.

INSTALLATION HA NDBOOK

Maintenance

Epson PowerLite S17 / W17 / X17

3

7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right

way.

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.

8. Push in the lamp firmly and tighten the screws to secure it.

INSTALLATION HA NDBOOK

Maintenance

Epson PowerLite S17 / W17 / X17

4

9. Replace the lamp cover and tighten the screw to secure it.

Note: Be sure the lamp cover is securely installed or the lamp will not come on.

Reset the lamp timer to zero to keep track of the new lamp’s usage.

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement

message and to keep track of lamp usage correctly.

Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage

information.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Reset menu and press Enter.

4. Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours.

5. Select Yes and press Enter.

6. Press Menu or Esc to exit the menus.