Epson B134101 - DM D210 - Vacuum Fluorescent Display... Bedienungsanleitung

Customer Display

DM-D210

Installation Manual/

/設置マニュアル / 安裝手冊

401285101

English

CAUTIONS

❏This document shall apply only to the product(s) identified herein.

❏No part of this document may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of Seiko Epson

Corporation.

❏The contents of this document are subject to change without notice. Please

❏While every precaution has been taken in the preparation of this document,

Seiko Epson Corporation assumes no responsibility for errors or omissions.

❏Neither is any liability assumed for damages resulting from the use of the

information contained herein.

❏Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser

of this product or third parties for damages, losses, costs, or expenses incurred

by the purchaser or third parties as a result of: accident, misuse, or abuse of this

product or unauthorized modifications, repairs, or alterations to this product, or

(excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's

operating and maintenance instructions.

❏Seiko Epson Corporation shall not be liable against any damages or problems

arising from the use of any options or any consumable products other than

those designated as Original EPSON Products or EPSON Approved Products by

Seiko Epson Corporation.

TRADEMARKS

EPSON®is a registered trademark of Seiko Epson Corporation.

Microsoft®, MS®, MS-DOS®, Windows®, Windows NT®are registered trademarks

of Microsoft Corporation.

General Notice: Other product and company names used herein are for

identification purposes only and may be trademarks of their respective companies.

English

Safety Precautions

This document presents important information intended to ensure safe and effective use

of this product. Please read this document carefully, and store it in an accessible location

near your installation.

Precaution Headings

This document uses the two headings shown below to call attention to potential hazards.

Failure to observe the information provided under or alongside these headings may lead

to injury or property damage. Be sure that you understand the meaning of each heading

before you proceed.

WARNING:

Indicates a potentially lethal hazard. Failure to observe a WARNING

may result in severe injury or death.

CAUTION:

Failure to observe a CAUTION may result in personal injury, or in damage

to equipment or other property.

Safety Precautions

WARNING:

❏

Shut down your equipment immediately if it produces smoke, a

strange odor, or unusual noise. Continued use may lead to fire or

electric shock. Immediately turn the power off and contact your

dealer or a SEIKO EPSON service center for advice.

❏

Never attempt to repair this product yourself. Improper repair work

can be dangerous. Tampering with this product may result in injury,

fire, or electric shock.

❏

Be sure to use the specified power source. Connection to an

improper power source may cause fire or shock.

❏

Do not allow foreign matter to fall into the equipment. Penetration

of foreign objects may lead to fire or shock.

❏

If water or other liquid spills into this equipment, immediately turn the

power off and contact your dealer or a SEIKO EPSON service center

for advice. Continued usage may lead to fire or shock.

CAUTION:

❏

Do not plug the cable differently from the instruction in this manual.

Wrong connection may cause equipment damage and fire.

❏

Be sure to set this equipment on a firm, stable, horizontal surface.

Product may be damaged or cause injury if it falls.

❏

Do not use in locations subject to high humidity or dust levels.

Excessive humidity and dust may cause equipment damage, fire, or

shock.

❏

Do not place heavy objects on top of this product. Equipment may

be damaged and cause injury if it falls.

❏

Do not attach plural extension supports. Product may be damaged

or cause injury if it falls.

❏

A stopper limits the horizontal rotation of the display. Do not try to

force it to turn beyond the limits of the stopper. Doing so may

damage the equipment.

EMC and Safety Standards Applied

Product Name: DM-D210

Type Name: M59DB

The following standards are applied only to the display that is so labeled. (EMC is tested

using the EPSON PS-170 power supply.)

❏Europe: CE Marking

Safety: EN60950

❏North America: EMI: FCC/ICES-003 Class A

Safety: UL 1950/CSA C22.2 No.950

❏Japan: EMC: VCCI Class A JEIDA-52

❏Oceania: EMC: AS/NZS 3548 (CISPR22) Class B

CE Marking

The display conforms to the following Directies and Norms

Directive 89/336/EEC EN55022 Class B

EN55024

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-4

IEC 61000-4-5

IEC 61000-4-6

IEC 61000-4-11

English

WARNING

You are cautioned that changes or modifications not expressly approved by SEIKO

EPSON Corporation could void your authority to operate the equipment.

FCC COMPLIANCE STATEMENT FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

FOR CANADIAN USERS

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme àla norme NMB-003 du Canada.

About This Manual

Cautions and Notes

CAUTION:

Cautions must be observed to avoid minor injury to yourself or damage

to your equipment.

Note:

Notes have important information and useful tips on the operation of your display.

Contents

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Cautions on Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Attaching to the IR series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Attaching to the TM-H5000II/TM-J8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Attaching to the TM-U375/TM-U950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Attaching to the TM-H6000/TM-U675 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Attaching to Other TM Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Attaching to the DM-D stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

DIP Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

DIP Switch Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Turning and Tilting the DM-D210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Check Items of Self test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Performing Self test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Character Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Reliability Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

English

This manual explains how to set up the DM-D210.

Unpacking

The following items are in the box.

Make sure that you have all the items shown above, and that none has

been damaged. If you find anything missing or damaged items, please

contact your DM-D210 dealer.

Cautions on Handling

When you use the DM-D210, be sure to note the following points:

❏Avoid locations that are subject to high temperature and humidity.

❏Avoid dirty and dusty locations.

❏Avoid locations that are unstable or are subject to high levels of

vibration.

❏When connecting or disconnecting cables, make sure that the

power switch of the DM-D210 and printers connected to the DM-

D210 are turned off.

❏Do not drop the DM-D210, because you may damage the built-in

vacuum fluorescent display.

on manua

Display (DM-D210)

Usage

The DM-D210 can be used with the following equiment.

❏IR series. You can attach the DM-D210 to the IR series using the

“DM-D pole unit for IR” (DP-504). (See page 7.)

❏TM-H5000II/TM-J8000 printers. You can attach the DM-D210 to

TM-H5000II/TM-J8000 printers using the “DM-D pole unit for TM

printers (Type B)” (DP-503). (See page 9.)

❏TM-U375/TM-U950. You can attach the DM-D210 to the TM-U375/

TM-U950 printers using the “DM-D pole unit for TM printers

(Type A)” (DP-502). (See page 12.)

❏TM-H6000/TM-U675. You can attach the DM-D210 to TM-H6000/

TM-U675 printers using the “DM-D pole unit for TM printers

(Type A)” (DP-502). (See page 15.)

❏Other TM printers. You can attach the DM-D210 using the “DM-D

pole unit for TM printers (Type A)” (DP-502) and Velcro tapes or

screws. (See page 20.)

❏DM-D stand. You can attach the DM-D210 to the DM-D stand

directly using the “DM-D stand unit for DM Customer Display”

(DP-110). When using the DM-D stand, an optional power supply

unit (PS-170) is required. Also, if you want to extend the length of

the DM-D210, an optional extension support is required. (See

page 23.)

English

Assembling

Attaching to the IR series

The DM-D210 can be attached directly to the IR series using the “DM-D

pole unit for IR” (DP-504).

Required items

The following items are used to attach the DM-D210 to the IR series.

These items are packed with the “DM-D pole unit for IR” (DP-504).

Assembling steps

1. Pass the cable for the DM-D210 through support A, and attach

support A to the DM-D210.

When using support B for extension, insert the tab on support B

into the hole on support A until you feel it click.

base

fixing screws

support B

(for extension)

support A

When using support B for

extension

2. Attach the base to the setting position on the IR series, and secure it

with the screws.

Note:

When attaching the base, note that the corners of the base are set as shown

below.

3. Pass the cable for the DM-D210 through the base.

4. Insert the tab on the base into the hole on the support until you feel

it click.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Touch-Terminal Handbücher

Epson

Epson IM-800 Bedienungsanleitung

Epson

Epson U675 - TM Color Dot-matrix Printer Bedienungsanleitung

Epson

Epson IM-800 Bedienungsanleitung

Epson

Epson U230 - TM Two-color Dot-matrix Printer Bedienungsanleitung

Epson

Epson TM-U590 Series Installations- und Betriebshandbuch

Epson

Epson DM-D110 Series Gebrauchs- und Pflegehandbuch

Epson

Epson MR Series Produkthandbuch

Epson

Epson IR-700 Bedienungsanleitung

Epson

Epson IR-320 Produkthandbuch

Epson

Epson Mobilink TM-P60 Bedienungsanleitung

Epson

Epson B113111 - DM D500 - Vacuum Fluorescent Display... Bedienungsanleitung

Epson

Epson IR-320 Bedienungsanleitung

Epson

Epson SR-600 Bedienungsanleitung

Epson

Epson DM-D500 Series Bedienungsanleitung

Epson

Epson DM D110 Bedienungsanleitung

Epson

Epson DM-D110 Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung