eqss Gen-3 LMS Bedienungsanleitung
EQUIPMENT SAFETY SYSTEMS PTY LTD
eqss™ Gen-3 LMS
Telehandler Load Management System
Installation Manual for JCB 5 0-180
PLEASE NOTE:
VER: 1810171225
***Failure To Follow Installation Manual Will Void Warranty***
***Do Not Swap Components between Gen3-LMS kits***
When installing multiple Gen3-LMS kits, make sure the serial
number on the sticker matches the serial number on the
machine.
Documentation Conventions
The list below highlights important do umentation onventions.
Text presented in this manner is intended to provide the user
with some general information. The user should ensure
information presented in this manner is clearly understood.
Text presented in this manner provides the user with
information to assist in completion of the current procedure
being explained.
Text presented in this manner indicates that a failure to follow
directions could result in damage to equipment, loss of
information, bodily harm, or loss of life.
VER: 1810171225 2 of 49
Important Information
Information ontained in this publi ation regarding this devi e's appli ations and the like is
provided only for your onvenien e and may be superseded by updates. It is your
responsibility to ensure that the appli ation or our equipment meets with your
spe ifi ations.
EQUIPMENT SAFETY SYSTEMS MAKE NO REPRESENTATIONS OR WARRANTIES
OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY
OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED
TO, IT'S CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS
FOR PURPOSE.
Equipment Safety Systems dis laims all liability arising from this information and its use.
Use of Equipment Safety Systems’ produ ts as riti al omponents in life support systems
is not authorised ex ept with express written approval by Equipment Safety Systems. No
li enses are onveyed, impli itly or otherwise, under any Equipment Safety Systems
intelle tual property rights.
VER: 1810171225 3 of 49
Table of Contents
Tools Required for Installation.....................................................................................5
Installation Index...........................................................................................................6
overs.........................................................................................................................10
able Reeler Installation.............................................................................................11
able Reeler Mounting Position.............................................................................13
Pressure Sensor Installation.......................................................................................14
Main ylinder Head Pressure Sensor – Option 1..................................................14
Main ylinder Head Pressure Sensor – Option 2..................................................15
Main ylinder Rod Pressure Sensor......................................................................16
ompensation Pressure Sensors............................................................................18
Reverse amera..........................................................................................................20
Forward amera..........................................................................................................21
Signal Light Installation..............................................................................................22
an Pressure Input Module ( PIM)............................................................................25
an abin Interface Module ( IM)...........................................................................27
External able ompletion.........................................................................................28
Dashboard Switches....................................................................................................29
Display Installation......................................................................................................30
Machine onnections..................................................................................................32
Finalisation..................................................................................................................36
Set Time & Sensor alibration...................................................................................40
Appendix A: Attaching Display onnectors...............................................................43
Appendix B: Reattach Ferrites...................................................................................47
Indexes and Tables.....................................................................................................48
VER: 1810171225 4 of 49
Tools Required for Installation
The tools required to perform the installation of the TSS are listed below
•Pen il or Texta
•Drill
•Drill bits
◦3.3 mm
◦4.5 mm
◦5 mm
◦6.25 mm
◦6.8 mm
◦8.5 mm
•Centre pun h
•Tap T-Handle
•Taps
◦M6
◦M7 x 0.75
◦M8
•Drill and tap oil
•Metri Allen keys
•Phillips Head s rew driver
•Spanners and so kets
◦7 mm
◦10 mm
◦13 mm
•Lo ktite thread lo ker
•Side utters
•Stanely knife
•Crimpers
•Wire strippers
•Hole saw
◦31 mm
◦34 mm
VER: 1810171225 5 of 49
Installation Index
The omponents and ables of the Gen-3 Telehandler Load Management System are
outline in the tables below. The following pages show where the omponents are installed
and the able routing.
See the appropriate manual se tion for a detailed installation des ription for ea h
omponent.
Refer to this section for any component placement or cable
routing issues
Item omponent Description
1 able Reeler
2 Main Lift ylinder Head Pressure Sensor
3 Main Lift ylinder Rod Pressure Sensor
4 ompensation Pressure Sensors
5 an Pressure Input Module ( PIM)
6 Forward amera
7 Reverse amera
8 Light Tower
9 an abin Interface Module ( IM)
10 Display Module
Table 1: Component Installation Index
VER: 1810171225 6 of 49
olour able Description
Red Boom able
Dark Green Main ylinder Pressure Sensor ables
Brown ompensation Head Pressure Sensor able
Dark Blue ompensation Rod Pressure Sensor able
Light Blue Forward amera able
Violet Signal Light able
Aqua Rear amera able
Dark Purple IM able
Light Green utout Harness
Light Purple Height Limiter able
Orange Display able
Table 2: Cable Installation Index
VER: 1810171225 7 of 49
Andere Handbücher für Gen-3 LMS
11
Inhaltsverzeichnis
Andere eqss Monitor Handbücher
