Erbauer EBR1750 Bedienungsanleitung
EBR1750
EAN: 3663602795193
ORIGINAL INSTRUCTIONS
V4
2
Safety instructions 6
Product description 16
Assembly 19
Use 21
Care & maintenance 23
Guarantee 26
Declaration of conformity 27
3
1
x1
WARNING! Please read all safety warnings carefully and be
sure that they are fully understood before handling the tool.
4
Product description
1
2
9
10
1
8 7
12
3
4
5
6
A
4. 1.
2.
3.
8
7
B1.
2.
2
1
180°
5
C
9/10
D
9/10
E1.
2.
2
1
180°
F
G
1.
2.
3
4
5
H11
6
Safety instructions
GENERAL POWER TOOL SAFETY WARNING
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or
serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk
of electric shock.
7
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energising power tools that have the switch
on invites accidents.
8
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
9
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
5) SERVICE
a) Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
ADDITIONAL SAFETY WARNINGS FOR BREAKER
HAMMER SAFETY WARNINGS
a) Wear ear protectors. Exposure to noise can cause
hearing loss.
b) Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
c) Hold power tool by insulated gripping surfaces
only, when performing an operation where the
cutting accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
d) ALWAYS ensure that the auxiliary handle is rmly
afxed and secure.
10
e) ALWAYS use this product when standing on a rm
and secure platform or the ground. (DO NOT USE ON
LADDERS OR STEPS)
f) The power tool shall not be wet or applied in wet
environment.
g) The voltage of the power source must agree with the
voltage specied on the rating label of the machine.
h) Check the product, its power cord and plug as well as
accessories for damage before each use. Do not use
the product if it is damaged or shows wear.
i) Double check that the accessories and attachments
are properly xed. A short-time test running in no-load
condition will be helpful to identify any problems.
j) Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to
re and electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes property
damage or may cause an electric shock.
k) Keep the handles dry to ensure safe control. Grip the
product securely with two hands so you have full control
at all times.
l) The chisel, chuck and the work piece can become very
hot while working. Do not touch them before they have
cooled down.
m)Ensure that the air vents are always unobstructed
and clear. Clean them if necessary with a soft brush.
Blocked air vents may lead to overheating and damage
the product.
n) Switch off the power tool immediately when the bit
jams. The chisel jams when: the power tool is subject
to overload or it becomes wedged in the workpiece.
Switch the power tool off and then loosen the bit.
o) Switch the product off immediately if you are disturbed
while working by other people entering the working
area. Always let the product come to complete stop
before putting it down.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Erbauer Elektrowerkzeuge Handbücher
Erbauer
Erbauer ERB096HTG Bedienungsanleitung
Erbauer
Erbauer ERB108SDR Bedienungsanleitung
Erbauer
Erbauer ERB049DRH Bedienungsanleitung
Erbauer
Erbauer ERN647ATL-I Bedienungsanleitung
Erbauer
Erbauer ERB383WCH Bedienungsanleitung
Erbauer
Erbauer ERN634ATL Bedienungsanleitung
Erbauer
Erbauer EJS750 Bedienungsanleitung
Erbauer
Erbauer ERI065JSW Bedienungsanleitung
Erbauer
Erbauer ERB807A Bedienungsanleitung
Erbauer
Erbauer ECD12-Li-2 Bedienungsanleitung
Erbauer
Erbauer ERB389JSW Bedienungsanleitung
Erbauer
Erbauer ERB383WCH Bedienungsanleitung
Erbauer
Erbauer ERB125Y Bedienungsanleitung
Erbauer
Erbauer ERB140D Bedienungsanleitung
Erbauer
Erbauer EJS18-Li Bedienungsanleitung
Erbauer
Erbauer ERB210C Bedienungsanleitung
Erbauer
Erbauer EHTIW18-Li Bedienungsanleitung
Erbauer
Erbauer EMT18-Li-QC Bedienungsanleitung
Erbauer
Erbauer ERB900 Bedienungsanleitung
Erbauer
Erbauer ERB150D Bedienungsanleitung
