Ergotron Zip40 Bedienungsanleitung

1 of 17

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Deutsch

Benutzerhandbuch - Nederlands

Guida per l’utente - Italiano

Användarhandbok - svenska

ユーザーガイド:日本語

用户指南 : 汉语

Zip40 Charging Cart

2x 9x

Includes PowerShuttle™Technology

ENGLISH

888-24-326-G-02 rev. E • 08/18

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

Tools Needed

Components

2 of 17

WARNING

828-196

Unplug power cord.

DO NOT place hands on or near fans.

Placing hands on or near fans may

cause equipment damage and/or

serious personal injury.

MOVING PARTS

CAN CRUSH AND CUT

ENGLISH

888-24-326-G-02 rev. E • 08/18

These symbols alert users of a safety condi-

tion that demands attention. All users should

be able to recognize and understand the

signiﬁcance of the following Safety Hazards

if encountered on the product or within the

documentation. Children who are not able

to recognize and respond appropriately to

Safety Alerts should not use this product with-

out adult supervision!

Hazard Symbols

Review

Symbol Signal Word Level of Hazard

NOTE A NOTE indicates important information that helps you

make better use of this product.

CAUTION

A CAUTION indicates either potential damage to

hardware or loss of data and tells you how to avoid the

problem.

WARNING A WARNING indicates either potential for property dam-

age, personal injury, or death.

ELECTRICAL

An Electrical indicates an impending electrical hazard

which, if not avoided, may result in personal injury, re

and/or death.

Safety

WARNING: MOVING PARTS CAN CRUSH AND CUT. Unplug power cord. DO NOT place

hands on or near fans. Placing hands on or near fans may cause equipment damage and/or

serious personal injury.

Warning: Unplug power cable from outlet and make sure power button is turned o before removing side cover. Removing side

cover with power on may cause equipment damage and/or serious personal injury.

3 of 17

A< 25 lbs. (11.3 kg)

A + B + C + D + E < 255 lbs. (116 kg)

B< 76.5 lbs. (34.7 kg)

C< 76.5 lbs. (34.7 kg)

D< 76.5 lbs. (34.7 kg)

ENGLISH

888-24-326-G-02 rev. E • 08/18

Features & Speciﬁcations

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.

SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

External auxiliary outlet

2 receptacles – US, JP

1 receptacle – EU, UK, AU, CN

Power Button

Four 12V continuous operating fans

Cable wrap

OPTIONAL

Lock not included

4 of 17

ENGLISH

888-24-326-G-02 rev. E • 08/18

Open doors.

5 of 17

40x

15x

10x

30x

ENGLISH

888-24-326-G-02 rev. E • 08/18

Choose conﬁguration for number of devices.

Cart is already conﬁgured for this, please skip to page 9.

Dividers and Ethernet cables will need to be reconﬁgured for this

set up, please see instructions on pages 6-8.

Slot Size:

1.1" (27.9 mm)

Slot Size:

1.4" (35.6 mm)

6 of 17

30x i

iii

ENGLISH

888-24-326-G-02 rev. E • 08/18

To conﬁgure for 30 devices, remove dividers.

i. Pull lever towards you.

ii. With lever pulled, slide divider towards you.

iii. Lift up and off.

To conﬁgure for 30 devices, reattach dividers, 10 per shelf.

i. Insert tabs on bottom of divider into designated holes on shelf.

ii. Slide divider away from you to lock into place.

7 of 17

30x

40x

ENGLISH

888-24-326-G-02 rev. E • 08/18

Attach spacers if your devices are < 9" (229 mm).

8 of 17

ENGLISH

888-24-326-G-02 rev. E • 08/18

Remove back panel.

Plug in and route power cables.

There are different instructions for each type of power cable. Follow the instructions that

match your style power cable.

a. Plug in the power cables for the top shelf. Use the top row of outlets, and for the 40 device

conﬁguration, every other outlet on the second row. Store the power cables in the top basket.

b. Route the device plugs between the basket and the top outlet row and up through the top of the

dividers. Make sure there is enough slack in cable to plug into device.

c. Bundle cables and store in top basket.

9 of 17

ENGLISH

888-24-326-G-02 rev. E • 08/18

d. Plug in the power cables for the Middle shelf. Use the entire third outlet row, and for the 40 device

conﬁguration, the remaining outlets on the second row. Store the power cables from the second

outlet row in the top basket and the power cables from the third row in the bottom basket.

e. Route the device plugs under the third outlet row and up through the top of the dividers. Make

sure there is enough slack in cable to plug into device.

f. Bundle cables and store in the baskets.

g. Plug in the power cables for the bottom shelf. Use the bottom row of outlets. Store the power

cables in the bottom basket.

h. Route the device plugs between the basket and the bottom outlet row and up through the top of

the dividers. Make sure there is enough slack in cable to plug into device.

i. Bundle cables and store in bottom basket.

10 of 17

def

ab c

ENGLISH

888-24-326-G-02 rev. E • 08/18

Remove the baskets designed to hold the power supplies that are not present with

this type of power cable.

a. Lift basket up to unlock tab.

b. Pull basket out.

c. Lift bottom basket up to unlock tab then pull out.

d. Plug in the power cables for

the top shelf. Use the top row

of outlets, and for the 40 device

conﬁguration, every other outlet

on the second row. Route the

device plugs under the top

outlet row and up through the

top of the dividers. Make sure

there is enough slack in cable

to plug into device.

e. Plug in the power cables

for the Middle shelf. Use the

third row, and for the 40 device

conﬁguration, the remaining

outlets on the second row.

Route the device plugs under

the third outlet row and up

through the top of the dividers.

Make sure there is enough

slack in cable to plug into

device.

f. Plug in the power cables

for the bottom shelf. Use the

bottom row of outlets. Route

the device plugs under the

bottom outlet row and up

through the top of the dividers.

Make sure there is enough

slack in cable to plug into

device.

Andere Handbücher für Zip40

Inhaltsverzeichnis

Andere Ergotron Akkuladegerät Handbücher

Ergotron

Ergotron LTSC30 Series Bedienungsanleitung

Ergotron

Ergotron YES BASIC YESBASGMPW4 Bedienungsanleitung

Ergotron

Ergotron PowerShuttle Bedienungsanleitung

Ergotron

Ergotron DM12-1006 Bedienungsanleitung

Ergotron

Ergotron Tablet Management Cart / Module Bedienungsanleitung

Ergotron

Ergotron Zip12 Bedienungsanleitung

Ergotron

Ergotron DM12-1006-1 Bedienungsanleitung

Ergotron

Ergotron Adjusta YES24 Bedienungsanleitung

Ergotron

Ergotron Yes 20 Bedienungsanleitung

Ergotron

Ergotron DM16-1015 Bedienungsanleitung

Ergotron

Ergotron YES 40 Bedienungsanleitung

Ergotron

Ergotron Zip12 Bedienungsanleitung

Ergotron

Ergotron YES BASIC Series Bedienungsanleitung

Ergotron

Ergotron LiFeKinnex FBC-1116 Bedienungsanleitung

Ergotron

Ergotron Yes 20 Bedienungsanleitung

Ergotron

Ergotron Tablet Charging Wall Mount 12 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung