Ericsson Monogram MHMA5C Bedienungsanleitung

Inhaltsverzeichnis

Andere Ericsson Akkuladegerät Handbücher

Ericsson

Ericsson M-RK Administratorhandbuch

Ericsson

Ericsson 19B801507P2 Bedienungsanleitung

Ericsson

Ericsson 344A3072P1 Bedienungsanleitung

Ericsson

Ericsson BML 161 66/2 Einrichtungshandbuch

Ericsson

Ericsson MASTR III 344A3168P1 Bedienungsanleitung

Ericsson

Ericsson 19B801507P1 Bedienungsanleitung

Ericsson

Ericsson Monogram MHCH3W Bedienungsanleitung

Ericsson

Ericsson Monogram Series Bedienungsanleitung

Ericsson

Ericsson BML 161 51/022 Bedienungsanleitung

Ericsson

Ericsson M-RK 344A4616P1 Administratorhandbuch

Ericsson

Ericsson BML 161 51/022 Bedienungsanleitung

Ericsson

Ericsson BML 161 51/022 Bedienungsanleitung

Ericsson

Ericsson BML 161 54/1 Bedienungsanleitung

Ericsson

Ericsson 344A3072P8 Bedienungsanleitung

Ericsson

Ericsson LBI-38706B Bedienungsanleitung

Ericsson

Ericsson LBI-38707 Bedienungsanleitung

Ericsson

Ericsson BML 161 59/1 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung

3. Insert the remaining charger units into the enclosure and insert

their respective AC power cord plugs into the receptacles of the AC

Outlet Strip (see Figure 2, view A).

NOTE

Perform the following steps (Steps 4 thru 6) to ensure that the charger

units function prior to installing the top retaining cover on the

enclosure.

4. Place the enclosure into position where it will be used and connect

the AC power cord plug from the AC Outlet Strip to a 110 VAC

power source.

5. Press the power switch on the AC Outlet Strip to the ON position.

6. Insert a

Monogram

Series VHF or UHF radio unit into each of

the charger slots and verify that the corresponding indicators light.

7. Install the top retaining cover and secure with two screws (see

Figure 2, view B). Ensure that no cabling is pinched or damaged

when the cover is secured.

8. Install the four self-adhesive rubber feet to the bottom of the

enclosure.

View A View B

Figure 2 - Assembly Instructions

Printed in U.S.A.

LBI-39037

Mobile Communications

Monogram

Series

DUAL RATE MULTI-

CHARGER (3-UNIT)

KIT MHMA5C

Installation Manual

TABLE OF CONTENTS

UNPACKING ........................................................................... 3

ASSEMBLY ............................................................................. 3

This manual is published by Ericsson GE Mobile Communications

Inc., without any warranty. Improvements and changes to this manual

necessitated by typographical errors, inaccuracies of current

information, or improvements to programs and/or equipment, may be

made by Ericsson GE Mobile Communications Inc., at any time and

without notice. Such changes will be incorporated into new editions of

this manual. No part of this manual may be reproduced or transmitted in

any form or by any means, electronic or mechanical, including

photocopying and recording,for any purpose, without the express

written permission of Ericsson GE Mobile Communications Inc.

Copyright© December 1993, Ericsson GE Mobile Communications Inc.

2

UNPACKING

When unpacking, be sure all parts are included. The following material

should be part of the kit.

•Three (3) Dual Rate Charger Units - MHMA5C

•One (1) Enclosure with retaining cover

•Two (2) Machine screws with washers and nuts: No. 10-16 x 2.5"

•Two (2) Thread forming screws: No. 10-16 x 3/4" or (machine

screws)

•One (1) AC Outlet Strip

•Four (4) self-adhesive rubber feet

ASSEMBLY

REQUIRED TOOLS

•Phillips screwdriver •Pliers or 1/4" nutdriver

ASSEMBLY

1. Install the AC Outlet Strip to the bottom of the enclosure using the

two machine screws (existing machine screws may need be removed

from the AC Outlet Strip). Insert the machine screws from the

bottom of the enclosure through the two holes and through the

mounting holes of the AC Outlet Strip. Use a washer and a nut on

each screw and tighten securely (see Figure 1, view A).

2. Insert one of the Dual Rate Charger Units into the enclosure and

insert its AC power cord plug into one of the receptacles of the AC

Outlet Strip (see Figure 1, view B).

View A

View B

Figure 1 - Assembly of 3-Unit Charger

3

TABLE OF CONTENTS

UNPACKING ........................................................................... 3

ASSEMBLY ............................................................................. 3

This manual is published by Ericsson GE Mobile Communications

Inc., without any warranty. Improvements and changes to this manual

necessitated by typographical errors, inaccuracies of current

information, or improvements to programs and/or equipment, may be

made by Ericsson GE Mobile Communications Inc., at any time and

without notice. Such changes will be incorporated into new editions of

this manual. No part of this manual may be reproduced or transmitted in

any form or by any means, electronic or mechanical, including

photocopying and recording,for any purpose, without the express

written permission of Ericsson GE Mobile Communications Inc.

Copyright© December 1993, Ericsson GE Mobile Communications Inc.

2

UNPACKING

When unpacking, be sure all parts are included. The following material

should be part of the kit.

•Three (3) Dual Rate Charger Units - MHMA5C

•One (1) Enclosure with retaining cover

•Two (2) Machine screws with washers and nuts: No. 10-16 x 2.5"

•Two (2) Thread forming screws: No. 10-16 x 3/4" or (machine

screws)

•One (1) AC Outlet Strip

•Four (4) self-adhesive rubber feet

ASSEMBLY

REQUIRED TOOLS

•Phillips screwdriver •Pliers or 1/4" nutdriver

ASSEMBLY

1. Install the AC Outlet Strip to the bottom of the enclosure using the

two machine screws (existing machine screws may need be removed

from the AC Outlet Strip). Insert the machine screws from the

bottom of the enclosure through the two holes and through the

mounting holes of the AC Outlet Strip. Use a washer and a nut on

each screw and tighten securely (see Figure 1, view A).

2. Insert one of the Dual Rate Charger Units into the enclosure and

insert its AC power cord plug into one of the receptacles of the AC

Outlet Strip (see Figure 1, view B).

View A

View B

Figure 1 - Assembly of 3-Unit Charger

3

3. Insert the remaining charger units into the enclosure and insert

their respective AC power cord plugs into the receptacles of the AC

Outlet Strip (see Figure 2, view A).

NOTE

Perform the following steps (Steps 4 thru 6) to ensure that the charger

units function prior to installing the top retaining cover on the

enclosure.

4. Place the enclosure into position where it will be used and connect

the AC power cord plug from the AC Outlet Strip to a 110 VAC

power source.

5. Press the power switch on the AC Outlet Strip to the ON position.

6. Insert a

Monogram

Series VHF or UHF radio unit into each of

the charger slots and verify that the corresponding indicators light.

7. Install the top retaining cover and secure with two screws (see

Figure 2, view B). Ensure that no cabling is pinched or damaged

when the cover is secured.

8. Install the four self-adhesive rubber feet to the bottom of the

enclosure.

View A View B

Figure 2 - Assembly Instructions

Printed in U.S.A.

LBI-39037

Mobile Communications

Monogram

Series

DUAL RATE MULTI-

CHARGER (3-UNIT)

KIT MHMA5C

Installation Manual