Ericsson HM410dp Bedienungsanleitung

ADSL2+ Service Gateway

HM410dp

User Guide

ADSL2+ Service Gateway

HM410dp

User Guide

ii 1553-ZAT 759 94 Uen A – October 2004

Disclaimer

No part of this document may be reproduced in any form without the written

permission of the copyright owner.

The contents of this document are subject to revision without notice due to

continued progress in methodology, design, and manufacturing. Ericsson shall

have no liability for any error or damages of any kind resulting from the use of

this document.

Abstract

This document describes configuration and management of the Ericsson

ADSL2+ Service Gateway HM410dp.

Trademark List

Windows Windows is a registered trademark of Microsoft

Corporation

All other brand and product names are trademarks or registered trademarks

of their respective holders.

1553-ZAT 759 94 Uen A – October 2004 iii

Contents

1Introduction 1

1.1 Structure of this Guide 1

1.2 Product Overview 1

2Hardware Description and Installation 3

2.1 Before You Start 3

2.1.1 Package Contents 3

2.1.2 Subscription for ADSL Service 3

2.1.3 System Requirements 3

2.2 Physical Appearance 4

2.2.1 Front Panel and LED Indicators 4

2.2.2 Back Panel and Connectors 5

2.3 Placement of the HM410dp 6

2.4 Installation 7

3Initial Configuration 9

3.1 Introduction 9

3.2 Access the Configuration Wizard 10

3.2.1 DHCP Routed (MER) 12

3.2.2 PPPoE Routed 12

3.2.3 Bridged 14

3.3 Access the Internet 15

4Advanced Configuration 16

4.1 Introduction 16

4.2 Default Settings 17

4.3 Basic Setup 19

4.3.1 Start 19

4.3.2 Firmware Update 20

4.3.3 Health Check 22

Contents

iv 1553-ZAT 759 94 Uen A – October 2004

4.3.4 Help 27

4.4 Advanced Setup 29

4.4.1 Password 29

4.4.2 Security 32

4.4.3 DHCP Server 44

4.4.4 Internet Access 50

4.4.5 UPnP 56

4.4.6 Save Config 57

4.4.7 Default Settings 58

4.4.8 Backup Restore Config 60

4.4.9 Log 62

5Configuring PCs 63

5.1 Before You Begin 63

5.2 Obtaining Internet Information Automatically 63

5.2.1 Windows XP 63

5.2.2 Windows 2000 64

5.2.3 Windows Me 65

5.2.4 Windows 95, 98 66

5.3 Assigning Static Internet Information 67

Glossary 68

Introduction

1553-ZAT 759 94 Uen A – October 2004 1

1 Introduction

This chapter tells you about the scope of this guide and gives a brief

product overview.

1.1 Structure of this Guide

This User Guide contains information that you will need to configure and

manage the ADSL2+ Service Gateway HM410dp.

The following chapters are included:

• Chapter 1 – “Introduction” – provides information about this guide and

gives a brief product overview.

• Chapter 2 – “Hardware Description and Installation” – provides a

hardware description and detailed instructions about how to install the

HM410dp. This is an extract from the “Quick Installation Guide”

provided in the product package.

• Chapter 3 – “Initial Configuration” – describes how to access the built-

in Configuration tool and run the Configuration Wizard in order to

perform the initial configuration.

• Chapter 4 – “Advanced Configuration” – provides detailed information

about how to perform configuration using the Advanced Setup options

included in the configuration tool.

• Chapter 5 – “Configuring PCs” – gives instructions for configuring the

Internet settings on your computers to work with the HM410dp.

• The Glossary includes abbreviations and explanations to technical

terms used in this guide.

1.2 Product Overview

The HM410dp acts as an advanced home router. It comes with all the

standard home router functions, such as NAT, a stateful firewall and a

DHCP Server. Additionally, the HM410dp includes a fully featured SIP and

IGMP Proxy, to enable voice and vide devices residing on the home

network.

The key benefits of the HM410dp are:

Introduction

2 1553-ZAT 759 94 Uen A – October 2004

• Top-notch ADSL2+ performance; HM410dp supports ADSL (G992.1)

and the newer ADSL2 (G992.3) and ADSL2+ (G992.5) standards.

• Quality of Service; Multiple PVCs and ATM level traffic shaping and

policing, together with a learning bridge and static IP routes.

Hardware Description and Installation

1553-ZAT 759 94 Uen A – October 2004 3

2 Hardware Description and Installation

This chapter describes the product and provides instructions about how to

install the HM410dp in a PC/Windows environment.

2.1 Before You Start

2.1.1 Package Contents

Check the contents of the package against the shipping contents checklist

below. If any of the items is missing, please contact the dealer from whom

the equipment was purchased.

• ADSL2+ Service Gateway HM410dp

• Power Supply adapter

• Ethernet cable

• ADSL Line cable

• Table stand

• Quick Installation Guide

Note: Your HM410dp package may also include other materials provided

by your service provider.

2.1.2 Subscription for ADSL Service

To use the ADSL2+ Service Gateway HM410dp, you will require an ADSL

service subscription from your broadband service provider.

2.1.3 System Requirements

Computer(s) that will be connected to the HM410dp must meet the

following requirements:

• 10/100Base-T Network Interface Card (NIC) installed.

• Operating system: Windows 95 or higher, Mac OS X, and Linux.

Hardware Description and Installation

4 1553-ZAT 759 94 Uen A – October 2004

2.2 Physical Appearance

2.2.1 Front Panel and LED Indicators

The HM410dp is equipped with seven (7) status LED (Light Emitting Diode)

indicators as shown in the illustration below.

Figure 1 - Front Panel Indicators

Although the LED functions depend upon the operational state of the

device, each LEDs general purpose is described in the table below (from

top to bottom).

Table 1 General Description of LEDs

Label Color Description

ADSL Green On: ADSL connection is established.

Blinking: Data transmission (activity) or

training.

LAN Green On: Ethernet connection to a LAN or single

Ethernet client is established.

Blinking: Data transmission (activity).

Status Green On: Status OK.

Blinking: System activity, for example saving

configuration to flash memory.

Power Green On: Power is on.

Hardware Description and Installation

1553-ZAT 759 94 Uen A – October 2004 5

2.2.2 Back Panel and Connectors

The following figure illustrates the back panel of the HM410dp:

Figure 2 - Back Panel of the HM410dp

Description of connectors and buttons:

Table 2 Description of Connectors and Buttons

Label Description

ADSL ADSL socket for connection to a splitter/filter of phone

outlet.

Ethernet Four Ethernet ports for connection to a PC, IP telephone,

set-top box, and/or switch/hub.

Reset Reset button (tiny hole) for resetting the HM410dp to

factory default settings. Section 4.4.7.1 – “Reset Button”

describes how a reset is done.

0 | 1 Power switch for turning power on or off.

12V AC 1.2A Power socket for connecting the power supply adapter.

Hardware Description and Installation

6 1553-ZAT 759 94 Uen A – October 2004

2.3 Placement of the HM410dp

The HM410dp can be placed either in a horizontal or upright position on a

flat surface (i.e. a table) as shown in the figures below:

Note: Proper ventilation is necessary to prevent the product from over-

heating. Do not block or cover the slots and openings on the

device, which are intended for ventilation and proper operation.

Figure 3 - Alternative Placement for the HM410dp

If you choose to place the HM410dp in an upright position, use the provided

table stand and fit the 4 pins on the table stand into the holes on the bottom

of the unit:

Figure 4 - Mounting of the Table Stand

Andere Handbücher für HM410dp

Inhaltsverzeichnis

Andere Ericsson Tor Handbücher

Ericsson

Ericsson HM490dp Bedienungsanleitung

Ericsson

Ericsson RBS 2308 Bedienungsanleitung

Ericsson

Ericsson E1 Bedienungsanleitung

Ericsson

Ericsson EDACS Series Bedienungsanleitung

Ericsson

Ericsson EDACS Jessica Bedienungsanleitung

Ericsson

Ericsson LBI-39001 Bedienungsanleitung

Ericsson

Ericsson EDACS Jessica Bedienungsanleitung

Ericsson

Ericsson MD110 Merkblatt

Ericsson

Ericsson EDACS Data Advantage Series Bedienungsanleitung

Ericsson

Ericsson HM410dp Bedienungsanleitung

Ericsson

Ericsson 5780 Handbuch

Ericsson

Ericsson EXN401 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung